What the difference between


Infiniti I30 Cefiro A32 Smoked 1 piece Headlights 95-99
and


Infiniti I30 Black A32 AngelEye CCFL Projector Headlights 95-99


Also where I can I find a new bumper without the space to put in a tag since I will be upgrading to the new cefiro tailight.


all accesories can be found here


http://www.depoautolights.com

 

the cffl/projector lights are just retro fitted smoked cefiros.

rear bumper will have to be imported from a cefiro brougham or custom.

 

Why is it more expensive then?!!! SO you mean to tell me ther eis no difference?!

 

can I order th ebumper through you?

 

the housing is the same, but there has been custom work done.

i don't sell the brougham conversion (yet )

 

How soon can you start sellling this


http://cgi.ebay.ph/ws/eBayISAPI.dll?...m=120206274668

 

wow... thats a nice set up. good find!

i don't know that i'll ever sell anything that complete. as for when i will be selling something... i pretty well have this year lined up with projects.

 

lol I knwo th e most out of this kit. Maybe Sy. I intend to buy in July the most I can get I mostly need the rear bumper though.

 

So basically I want to one which one is best


These


http://www.depoautolights.com/Infini...duct_info.html



or these


http://www.depoautolights.com/Infini...duct_info.html




And I plan on upgrading to an hid bi xenon kit by the end of the month.

 

If you upgrade to bi-xenon, you will have to mod/cut the existing housing to acccept the b-xenon solenoid/mechanism.

 

wait i was under the impression that the smoked cefiro that were linked are HID ready? i would love a little more info on this since i plan on doing those headlights + HID's over the summer

 

Is there any procedures on how to do so??!!!!! Or is there any other headlights I can buy that bi xenon ready?!?!

 

Can I use all my stock bulbs for this light below? I might do a projector mod is the far future, but dont want to hack my existing light for the clear corner..

http://www.depoautolights.com/Infini...duct_info.html

Thanks..

 

I'm still wondering if there is a difference between the cefiro headlights and the cefiro projectors.

 

they are both the same headlights. the difference is the projectors have projectors added. its really not al that complicated. if you dont know what projectors are i suggest googling "projector retrofit".

 

My bad for the constant nagging I"m just not familiar with certain term as english my second language.

For an infiniti i30t 98 wich one should I pick knowing I want to upgrade to hid bi xenon.

 

oh ok, understandable. i you want to upgrade you should go with the regualr cefiro lights. upgarding isn't as simple as just replacing bulbs though. it will require customizing the housing to accomodate a bixenon assembly from another model. there is a lot of info on the hidplanet.com forums.

here is an example from a retrofit i am working on (single xenon lexus rx330 projectors with clear lens):

 

^^^ nice work in progress.. I'm doing the same but with the smoked ones..
I noticed you went to install the projector into the actual rear part of the headlights and not the bowl.. any reason why? ( btw, Im using TSX projectors and not RX330)..
how are you going to aim them?

 

^^I was kinda wondering the same thing.

 

ehhh... hopefully i'll be able to aim them on the car. lets just say i got a little ahead of myself, but the fit on the rx to cefiro was so perfect that i kind of figured they would be good. i made the mistake of sealing the first projector into the housing so that might have to be reworked.

all mistakes aside, the reason why i did it was to have the projector as far back as possible. imo a lot of retros loook bad (to me) because the proctor is pushed so far forward. i was going for an oem look so thats how i chose to do it.

 

So is this a project youre working on right now or another one thats taken the back seat to other "more important" projects?..i.e suspension, body-work, interior? I've been watching around for updates on your car, love the quality work being done.

 

this is a mod that took the back seat, and has recently come back to the table. i never bought bulbs/ballasts so i am collecting those things so i can aim and complete them. then when they are done i will most likely sell them. it dawned on me that because i am building my car to be so low at ride hieght having a defined cutoff is probably not the best idea. as of now the top of my headlight is around my knee without the bags installed. once bagged i am looking to be a few inches lower with ride hieght being ~1" higher than full low.

as for updates, the interior dying is 95% done, the suspensions will be done once i install the bags, brakes are done, currently working on electrical/sound deadening/plastic trim. nothing really picture worthy yet but when there is i will update my build thread.

thanks for the props!

 

definately keep us posted..
I'll try to post pics of my retro project as well eventually..
and yes, I agreed a lot of retros are done with the projector pushed so forward.. mine personnaly, I find not too bad, they are litterally sitting as far back as possible in the "bowl"..

I see you lost the function of your 194 bulb in the cefiros

 

Thanks a lot for the feedback guys!!!

I'm not as handy as you guys though so Ill see which mod shop around my way will be able to do this. I just want the lsophisticated look that most of the recent luxury sedan headlights have.

 

If your not too handy, you should be sure to buy an light made for I30, cefiro is alot diffrent, my m8 bought from ebay and didnt know it was diffrent....close to impossible to customize and still make it look good

 

hmmm when i think about im damn confused....I live in norway and here the car is called Nissan Maxima QX...and the light my m8 ordered for his car was for cefiro...nothing fitted, the light you guys talk about, fits for both i30 and cefiro...how??


Also i ordered headlights for i30 and they fot for my car, just the corner lights has some diffrent attachment for the bulb housing...but its easy fixing...

 

us i30s use the same sheet metal as the cefiro.

 

I already have the smoked eagle eyes cefiro headlights on my i30. I just want to know what step to take to upgrade to abi xenon hid kit. Im not too handy so I just want to know my options thats all.

 

as your not handy i think it would be a bit advanced for you, i remember my m8 build once...it was a nightmare he told me lol..

 

Hey dj can you read?!!1 I';m asking for viable options and a how to process so I can get it done. Not comment that arent getting anywhere. Be constructive.