Infiniti I30/I35 Similar to a Maxima, yet not really a Maxima. Discussion forum on Nissan's luxury model, the Infiniti I30/I35

Removing chrome bar above license plate I35

Thread Tools
 
Search this Thread
 
Old 10-26-2008, 01:16 PM
  #1  
Senior Member
Thread Starter
iTrader: (4)
 
burgy's Avatar
 
Join Date: Jun 2008
Location: Tampa Bay
Posts: 539
Removing chrome bar above license plate I35

I35
Anyone know how to get to the chrome bar? I got in there and once I had the trunk carpet off I undid a few bolts, but I still can't find out how to get the chrome bar off so I can replace it with one that doesn't have the ugly gold letters....Thanks
burgy is offline  
Old 10-26-2008, 02:17 PM
  #2  
Got Projectors?
iTrader: (19)
 
MetaOrbit's Avatar
 
Join Date: Apr 2002
Location: Knoxville, TN
Posts: 3,532
I spent an afternoon trying to get mine off and gave up. You have to remove the tails, and there are IIRC 1-2 other bolts. Then, from what I could tell, there are a LOT of clips behind the trunk latch mechanism that I could never get to. I was told that if I had a panel popper it would have been a lot easier, but I haven't been back in there since to give it a try.

I know a couple of other people in here have done it successfully. Hopefully they'll chime in.
MetaOrbit is offline  
Old 10-27-2008, 08:07 PM
  #3  
Member
 
trent.davis23's Avatar
 
Join Date: May 2007
Location: Woodstock Georgia
Posts: 94
Originally Posted by MetaOrbit
I spent an afternoon trying to get mine off and gave up. You have to remove the tails, and there are IIRC 1-2 other bolts. Then, from what I could tell, there are a LOT of clips behind the trunk latch mechanism that I could never get to. I was told that if I had a panel popper it would have been a lot easier, but I haven't been back in there since to give it a try.

I know a couple of other people in here have done it successfully. Hopefully they'll chime in.
I wish I could be more technical but if i remember correctly, I only had to remove 2-4 nuts and it popped right off with a cloth covered screwdriver. The whole assy. behind the license plate came off too I think.
trent.davis23 is offline  
Old 10-27-2008, 09:39 PM
  #4  
Got Projectors?
iTrader: (19)
 
MetaOrbit's Avatar
 
Join Date: Apr 2002
Location: Knoxville, TN
Posts: 3,532
Originally Posted by trent.davis23
I wish I could be more technical but if i remember correctly, I only had to remove 2-4 nuts and it popped right off with a cloth covered screwdriver. The whole assy. behind the license plate came off too I think.
Yeah, I got all the nuts, I just couldn't get it to come off from there. I was reluctant to start prying away to get the whole license panel off, but if that's all there is to it, I might have to give it another shot.
MetaOrbit is offline  
Old 11-03-2008, 04:51 PM
  #5  
Senior Member
Thread Starter
iTrader: (4)
 
burgy's Avatar
 
Join Date: Jun 2008
Location: Tampa Bay
Posts: 539
Thanks everyone, My boy is a certified Infiniti Mech and he does a boat load of work for me at the dealership. He said he will do it for me since he has the right tools.
burgy is offline  
Old 11-04-2008, 03:43 PM
  #6  
Senior Member
 
ZGadson's Avatar
 
Join Date: May 2007
Location: Atlanta, GA
Posts: 652
Why do you want it off? You're going to be left with huge holes where the clips were.
ZGadson is offline  
Old 11-05-2008, 08:22 AM
  #7  
Got Projectors?
iTrader: (19)
 
MetaOrbit's Avatar
 
Join Date: Apr 2002
Location: Knoxville, TN
Posts: 3,532
Originally Posted by ZGadson
Why do you want it off? You're going to be left with huge holes where the clips were.
I think he wants to get rid of the "gold" package on his. In my case, I eventually want to replace it with a new one as mine [somehow] became blemished.
MetaOrbit is offline  
Old 11-07-2008, 01:47 PM
  #8  
Senior Member
Thread Starter
iTrader: (4)
 
burgy's Avatar
 
Join Date: Jun 2008
Location: Tampa Bay
Posts: 539
^ Correct, I am replaceing it with a all chrome piece.
burgy is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
VQ'ed
Forced Induction
8
02-29-2016 08:05 AM
worldwiderecognized
4th Generation Classifieds (1995-1999)
2
09-24-2015 06:56 PM
brichi
7th Generation Maxima (2009-2015)
2
09-14-2015 05:23 PM
minsbang
8th Generation Maxima (2016-)
1
09-11-2015 08:48 PM
-ReLLiK-
4th Generation Classifieds (1995-1999)
0
09-08-2015 12:02 PM



Quick Reply: Removing chrome bar above license plate I35



All times are GMT -7. The time now is 08:01 PM.