Black Maxima's 1996 Nissan Maxima Gxe
#7
Guest
Posts: n/a
Thanks for the comments!
It's kind of hard to explain how I did it. First, I cut a piece of vinal and glued the middle of it to the door. Then, with a small flat bladed screw driver I "tucked" the edges into the crease around the insert. I made sure it was all the way into the crease. After that, I stuck a pen in the crease and drew a line. That line told me the correct shape and size the vinal pice had to be. I cut the vinal about 1/16" bigger than the line all the way around by only taking part of it out at a time. I made sure it fit perfectly and then without taking the whole vinal piece off, I glued part/half of the vinal piece to the door. I let it dry and then did the other half. That way I made sure the vinal would be lined up. I did come into a problem when the vinal had glue on it. It was really hard to tuck into the crease. I had to work my way around it with a screw driver. It took me a while to get the hang of it, but it was worth it.
I got the black vinal from a closet upstairs in my house. HAHA You could probably get it at JoAnne Fabrics or A.C. Moore.
http://forums.maxima.org/showthread....0&page=2&pp=30
It's kind of hard to explain how I did it. First, I cut a piece of vinal and glued the middle of it to the door. Then, with a small flat bladed screw driver I "tucked" the edges into the crease around the insert. I made sure it was all the way into the crease. After that, I stuck a pen in the crease and drew a line. That line told me the correct shape and size the vinal pice had to be. I cut the vinal about 1/16" bigger than the line all the way around by only taking part of it out at a time. I made sure it fit perfectly and then without taking the whole vinal piece off, I glued part/half of the vinal piece to the door. I let it dry and then did the other half. That way I made sure the vinal would be lined up. I did come into a problem when the vinal had glue on it. It was really hard to tuck into the crease. I had to work my way around it with a screw driver. It took me a while to get the hang of it, but it was worth it.
I got the black vinal from a closet upstairs in my house. HAHA You could probably get it at JoAnne Fabrics or A.C. Moore.
http://forums.maxima.org/showthread....0&page=2&pp=30
#13
Guest
Posts: n/a
do the mesh grille in black. it would look sick
Thanks for the compliments guys! I hope suspension will be comming soon. I'm hearing all types of noises and it feels really bad.
Thread
Thread Starter
Forum
Replies
Last Post
ah2002
5th Generation Maxima (2000-2003)
13
03-09-2016 01:42 PM
xUNIxPanther
8th Generation Maxima (2016-)
6
08-27-2015 10:09 PM