Bandwagon boat anchor cr00!
08-09-2008 | 12:31 PM
#1
(updated with clean pics) Bandwagon boat anchor cr00!
Got me some dub-deuces
18x8 G35s and 235/40 Federal SS595s
And I know I need some mineral spirits (and crappy touchup paint) for that nasty scrape... but that's not too bad compared to respraying a wheel because some retard hit it with a pressure washer when I told him not to
18x8 G35s and 235/40 Federal SS595s
And I know I need some mineral spirits (and crappy touchup paint) for that nasty scrape... but that's not too bad compared to respraying a wheel because some retard hit it with a pressure washer when I told him not to
Last edited by MorpheusZero; 08-10-2008 at 05:24 PM.
08-09-2008 | 01:46 PM
#4
:404 ERROR:
...Boat Anchor cr00 NOT FOUND...
hahah looks great. should've gotten some 245s instead. slap on a 5mm up front and a 10mm in the rear to push em out a bit more. done deals. should've used aircraft paint stripper too. would have eaten everything up to the bare metal. day late and a buck short... but its about time you upgraded from those dinky wheels...
...Boat Anchor cr00 NOT FOUND...
hahah looks great. should've gotten some 245s instead. slap on a 5mm up front and a 10mm in the rear to push em out a bit more. done deals. should've used aircraft paint stripper too. would have eaten everything up to the bare metal. day late and a buck short... but its about time you upgraded from those dinky wheels...
08-09-2008 | 03:58 PM
#5
small weanie oem wheels -> slightly larger, slightly less weanie, oem wheels
i was expecting so much more from this thread.
---
all bs aside though it looks nice. lil spacer in the rear never hurt no one.
i was expecting so much more from this thread.
---
all bs aside though it looks nice. lil spacer in the rear never hurt no one.
08-10-2008 | 06:29 AM
#18
False. 50lbs a corner = boat anchors. Just because you've got ship anchors doesn't mean mine are light 
Too wide. The Federals are a pretty wide tire and 235/40 has it almost exactly square.
I'd like to, but I should probably roll my fenders first.
I got some pretty nasty paint stripper, it ate through its container in about ten seconds and it ate through the paint pretty well too.
I still like the Z32s, they're a bit wider and way more unique.
actually I've gone down .5 inches in wheel width, which studies have shown is directly correlated to penor size 
Thanks brobrocop. I might be looking into spacers soon.
$230 picked up for the wheels plus $390 picked up for the tires..
hahah looks great. should've gotten some 245s instead.
slap on a 5mm up front and a 10mm in the rear to push em out a bit more. done deals.
should've used aircraft paint stripper too. would have eaten everything up to the bare metal. day late and a buck short... but its about time you upgraded from those dinky wheels...
I still like the Z32s, they're a bit wider and way more unique.
actually I've gone down .5 inches in wheel width, which studies have shown is directly correlated to penor size
ll bs aside though it looks nice. lil spacer in the rear never hurt no one.
$230 picked up for the wheels plus $390 picked up for the tires..
08-10-2008 | 06:34 AM
#19
real surprise there...
08-10-2008 | 08:39 PM
#27
08-10-2008 | 11:32 PM
#30
08-10-2008 | 11:53 PM
#31
Tires are brand new and wheel paint is still curing, no tire shine is fine
One on the rear was there when I got it
but the front was my doing... if you notice the pass. side mirror is kind of hanging off, some tards cracked the housing, I fixed it finally like a week ago and then one of the moron kids in our car group re-broke it being a jackass a day later
One on the rear was there when I got it
but the front was my doing... if you notice the pass. side mirror is kind of hanging off, some tards cracked the housing, I fixed it finally like a week ago and then one of the moron kids in our car group re-broke it being a jackass a day later
08-11-2008 | 12:38 AM
#33
Like 5 coats of primer
3 coats of color (2 light and 1 "medium wet" as directed on the can)
3 coats of clear in the same fashion
Some douchecanoe at the car wash I took it to decided to pressure wash the wheels after I told 'em not to and now I have a nice big ol' chip of paint missing... luckily I fished the paint out of the trash though...
3 coats of color (2 light and 1 "medium wet" as directed on the can)
3 coats of clear in the same fashion
Some douchecanoe at the car wash I took it to decided to pressure wash the wheels after I told 'em not to and now I have a nice big ol' chip of paint missing... luckily I fished the paint out of the trash though...
08-12-2008 | 03:11 AM
#35
Like 5 coats of primer
3 coats of color (2 light and 1 "medium wet" as directed on the can)
3 coats of clear in the same fashion
Some douchecanoe at the car wash I took it to decided to pressure wash the wheels after I told 'em not to and now I have a nice big ol' chip of paint missing... luckily I fished the paint out of the trash though...
3 coats of color (2 light and 1 "medium wet" as directed on the can)
3 coats of clear in the same fashion
Some douchecanoe at the car wash I took it to decided to pressure wash the wheels after I told 'em not to and now I have a nice big ol' chip of paint missing... luckily I fished the paint out of the trash though...
