Hi,

Just wanna share finished mods on my weekend car

Mod List :

Engine Mods :
Fully Rebuilt
Porting & Polish
3 Angle Valve Job
Cylinder Head Decking
Balanced Crankshaft
ACL Bearings for VQ30DE
JWT HD Valve Spring & Retainer Set for VQ30DE


Engine Management & Fuel System Mods :
Dastek Unichip Type Q with digital selector
Walbro Fuel Pump - GCA3402-1 kit
Tomei Fuel Pressure Regulator with Tomei Fuel Pressure Gauge
Autobahn Braided Hose & Fittings


Exhaust Mods :
XS Power Header & Y Pipe
DEI Heat Wrap
Custom Testpipe with Custom Fitted Vibrant Metal Core Hi Flow Cat
Greddy Spectrum Elite Full Catback System


Intake Mods :
HKS Replacement Air Filter
"Carbon Looks" Waterprint Stock Airbox


Cooling Mods :
Setrab 619 cooler with Setrab Bracket, Setrab Fittings, & Aeroquip Socketless Hose for ATF Cooler
B&M Racing Oil Cooler with Aeroquip Socketless Hose for Power Steering Fluid Cooler
Mishimoto Radiator
Apex'i Radiator Cap
Samco Radiator Hose


Electrical Mods :
Hot Inazma MR Type Voltage Stabilizer
HKS Circle Earth
Pivot Spark Earth


Engine Bay accessories :
Tomei Oil Cap
Greddy Neodymium Magdrain Bolt
Samco Vacuum Hose
FilterMag
Custom Painted Engine Cover
Chromed some parts & bolts
New Nissan Wiper Tank
New Nissan Radiator Reservoir Tank


Suspension Mods :
350Z (Z32) 17" Staggered Rims (7.5" & 8.0")
Bridgestone Potenza RE050 225/50/17 (Front) & 235/50/17 (Rear)
Infiniti Wheel Center Caps
Nismo S-Tune Lug Nuts
Tein S Tech Spring
Koni Adjustable Shock Absorber with Rancho Dust Boot
Front Hotbits Strutbar
Front UltraRacing UnderBrace
Energy Suspension Subframe Bushings
Energy Suspension Front Swaybar Bushings
Energy Suspension Front Swaybar Endlink Bushings
Rear Hotbits Strutbar
Rear Addco Swaybar
Pro-RS Braided Brake Line
All others rubber & suspension parts are replaced with Nissan OEM parts


Exterior Mods :
Cefiro JDM Headlamp with dual H1 bulb
Matsuhita Ballast with H1 6000k HID Bulb
Cefiro Facelifted Taillamp
Cefiro Crystal Clear Turn Signal Lamp
Cefiro M-style Electric Folding Mirror
Infiniti I30 Fuel Door Actuator
Repainted All Exterior Panels
Most off Exterior Parts are replaced with Nissan OEM parts


Interior Mods :
All Seat & Doortrim re-trimmed with Autoleder Catania
Steering Wheel re-trimmed with Autoleder Catania
Shift **** re-trimmed with Autoleder Catania
Chromed Door Handle
Re-varnished Wooden Panel
Re-painted some of interior panels
Auto Dimming Infiniti I30 USDM Mirror
Custom made "Visel" Carpet
Greddy Informeter Touch with Greddy Nissan Non-OBD adapter
Apex'i RSM with Apex'i Stand Meter


ICE Mods :
Pioneer AVH-P3450DVD Head Unit
DLS RA50 Power Amplifier
Morel Virtus 603 Front Speaker
Morel Primo 12 Subwoofer
Ramm Audio S2 RCA Cable
Klotz Speaker & Subwoofer Cable
Stinger Power Cable
Flux Engineering FC-422R Battery Post
Hushmat Sound Deadener


Special Thanks to :
God
My Parents, My Family, & My GF
sonic_gaul
"Kucai"
Modifikasi.com & Members
Firna Protechnik
Sigma Speed
Vertue Concept
Orion Jl. Madrasah
Mustika Varia
Champion Motor & Nissan PIK
Ruang Kencana Knalpot


UPDATED PICTURE (06/24/12) :







Updated June 2013

























Thanks for viewing

PS : please forgive for my bad English.

 

Wow dude, that is CLEAN. That look like a CF stock intake, pretty cool. +1 from a fellow I30 owner

 

Soooooo clean. OMG.. Are those the quad reflector headlight housings? So rare.

 

Showroom pimp quality man!

Makes me wanna get up to that level in aesthetic completeness one day!!!!

 

WoW...nice engine bay & all...keep it up.

 

Hi,
Thanks for your reply in this thread.
And it's just a stock intake with water transfer CF, not real CF intake

Hi,
Thanks for your reply in this thread.
Yes, It's quad reflector headlight housings.

Hi,
Thanks for your reply in this thread.
I believe you will be at this level in aesthetic one day


PS : Please forgive me for my bad English.

 

Hi,
Thanks for your reply in this thread.
Sure sir, will keep it as good as possible

 

it's more formal and polite than it ever is on here lol

 

Thanks sir

 

This is very clean! Was this converted to RHD or did it come like this. This is a rare item you have in your hands.

 

Hi,
Thanks for your reply in this thread
I live in Indonesia sir, so it is originally RHD come from the factory.

 

wow, car looks really really nice. i hate those Z wheels but for some reason they look good on your car, i guess its because the wheels are super spotless lol...

 

Hi,
Thanks for your reply on this thread
In the past, I wish I could get the 18" Z wheels but unfortunately I couldn't find them until now. But I got Z 17" wheels in good condition, so I took them

 

Stock MEVI FTW!!

Just in case you dont know OP, we call your intake manifold a MEVI over here.

 

Did you actually carbon fiber wrap your OEM air snorkel? Man, that's love.

 

Right hand drive FTW. Post more pictures please.

 

auto or manual?

 

Hi,
Thanks for you reply in this thread.
Yes Sir, our A32 is come with MEVI from the factory
I've been reading this forum for arround 4 years, so I know what you guys mean with MEVI

Hi,
Thanks for you reply in this thread.
No Sir, it's just a water transfer printing over the stock intake sir.

Hi,
Thanks for you reply in this thread.
Will updates the pics soon after this car have been repainted sir. There is lot of imperfections on my car, so what a shame to post more pics in this conditions


Hi,
Thanks for you reply in this thread.
It's Auto sir. 246HP.

 

are you on nitrous?

 

Hi,
Thanks for your reply in this thread.

Nope Sir. I just do my engine will post modify specification later, Sir

 

This. I see no turbo or Supercharger, so how are you claiming 246 WHP?

Very clean car though, and very cool dude! But I hope you're just mixing something up on that statement.

 

Hi,
Thanks Sir for your reply in this thread.
Yes Sir. I'll post the dyno sheet & modification list soon. Is it OK? Anyway, it is not 246WHP, but 246HP on the engine, base on dyno dynamics roller result.

 

Very Clean...

 

Hi,
Thanks for your reply in this thread

 

updated pic & mod lists

 

All that and you didn't put cams in? OUCH! Looks good dude. Probably still putting down around 180 whp not bad

 

Talk about a sleeper, did your port polish the heads and IM? Should also add a CAI for that extra HP

 

Love it. From another i30 owner...Awesome work, bro.

 

now I see what the hype is about! Good job on the car man. It sure is clean and I bet the engine feels powerful.

 

Also, I see fog lights were an option over there. All of our i30s in the states come standard with them if I remember correctly. I like the bumper without them though.

 

 

TDM mirrors? Do I spy?

 

Nice work man. I love the car.

 

NEED A CF MEVI COVER! haha ahhh you're missing that for some reason! Did you get those door handles yet? Your address is ridiculous!

 

You have made alot of people say wow posting this. Very nice man

 

Yes Sir. I haven't put any cams. It's hard for me to get the cams since when I build the engine, I can't afford the cams because I'm still a student which tight on money sir. Hope so in the next few years I can afford a newly build solid engine for s/c set-up.

Yes Sir, I did port & polish my heads & IM, also I've reamed the TB little bit As for the CAI, I'd think about that, but since I've drive many cars with CAI before, I really didn't like how it feels on A/T cars so I didn't take them

Thanks for your compliment, sir.

Thanks for your compliment, sir.

Yes Sir it is. Even in my country it's only come with 1 option, they didn't put full option for these car. Damn, I really hate it.
Anyway is it something wrong with us? I like the I30 bumpers over there and you like the I30 bumpers over here. Maybe we should make a trade

Thanks for your compliment, sir.

Yes Sir the mirror is from Taiwan. Before I put these mirror, I've put a OEM mirror that come with retract option. But it suddenly broken because the retract motor is not good anymore. So I took this mirror sir

Thanks for your compliment, sir.

I wish Sir but I already custom painted the MEVI & Engine cover, just haven't put it on. Will update the picture of them once this car got repainted
Oppsss I almost forget to answer this, but I haven't received the door handles yet, let wee see in the next few days sir.
Hahhaha, Yes Sir My address is very very long to write on hahaha.

Thanks for your compliment, sir.

 

i just re-read the thread, thats impressive. i wish i can pull that much out of my POS. lol

 

Thanks again Sir
Anyway, what's your mean about "POS"? I really don't know about this.


Anyway today I am going to my local garage to change the swaybar bushing & endlink bushing, also engine coolant temp sensor, water temp gauge sensor, & tensioner pulley. Hope so I can make another purchase of exterior rubber on Thursday

 

POS= Piece of Sh*t

hope that clears it up for you, very nice car, condition looks great

 

Hi,
Thanks for the explanation about POS hahaha.
Also Thanks againfor the compliment Sir.