I'm attempting to install a daytime running lights kit.

The kit has four wires:
* black - to ground
* red - to the plus battery terminal
* blue - to fuse at fuse panel controlled by ignition (a/c, radio, wipers)
* green - to low beam wire

There are three wires to each headlight bulb: green, blue, and orange.

Questions:
* Which wire should the kit's green wire be attached to (green, blue, or orange)?
* Can I just put the kit's blue wire in the fuse box secured by one of the fuses?
* If the blue wire is connected to a power source, why is there a red wire attached to the battery?

Thanks for any help with this.

 

Here's the 5thgen headlight, turn signal wiring diagram.. You can use this as reference. It's on my site..

http://pcguru2k.cjb.net/images/h4wiring.jpg