4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

I30 trans swap question

Thread Tools
 
Search this Thread
 
Old Feb 17, 2003 | 02:58 PM
  #1  
plurco's Avatar
Thread Starter
Donating Maxima.org Member
iTrader: (1)
 
Joined: Dec 2002
Posts: 1,628
I30 trans swap question

I am installing an I30 VLSD 5 speed in my '96 max. Which is also a five speed. I need to know what all I need to do this. Mine is a non locking diff, so do I need both CV axles or is just the drivers side different? When I go to the parts store to check on axles, they list a non-locking and a high speed diff. is this what they are calling the VLSD? I just want to have all the parts when I take the car to my mechanic, and I also don't want any suprises. All help is greatly appreciated.
Old Feb 17, 2003 | 03:08 PM
  #2  
plurco's Avatar
Thread Starter
Donating Maxima.org Member
iTrader: (1)
 
Joined: Dec 2002
Posts: 1,628
also does it matter if the trans is off a ABS car if mine is a non ABS car?
Old Feb 17, 2003 | 05:30 PM
  #3  
plurco's Avatar
Thread Starter
Donating Maxima.org Member
iTrader: (1)
 
Joined: Dec 2002
Posts: 1,628
come on guys please help me out, I have to know something my first thing in the morning.
Old Feb 17, 2003 | 07:34 PM
  #4  
96BLUMAX's Avatar
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Sep 2000
Posts: 2,374
From: Leesburg,Virginia
The abs wont matter for the tranny as long as you can use your same axels with the new tranny.
Old Feb 17, 2003 | 07:37 PM
  #5  
Romeo's Avatar
Senior Member
 
Joined: Sep 2000
Posts: 966
i believe you only have to swap out the driver side axle, but i could be wrong. as for abs, you should be ok. it'd be different if your car had abs and the tranny did not. again, i could be wrong.
Old Feb 17, 2003 | 07:49 PM
  #6  
plurco's Avatar
Thread Starter
Donating Maxima.org Member
iTrader: (1)
 
Joined: Dec 2002
Posts: 1,628
at the parts store they had two trans listed a non locking and a high speed diff. is this what they are calling the VLSD? also they had two different part #'s listed for the passengers side axle. I just don't want to buy anything I don't ave to. But at the same time I don't want this install to last but one day, since I cannot be without a car.
Old Feb 17, 2003 | 08:06 PM
  #7  
mtrai760's Avatar
'Trynna' is not a word
iTrader: (19)
 
Joined: Mar 2001
Posts: 7,079
From: Seattle Area, WA
Okay, here's the deal, since you dont have ABS, you can use either abs or non-abs axles. When I did my tranny swap, I replaced both axles, but I was going from auto to 5spd. Only the drivers side axle is supposed to be different, the seal is larger on the drivers side, but i know of one member who swapped in a lsd tranny and he didn't change his axles, and he hasn't had a single problem. That being said, you do run a risk, especially since Nissan does offer two different part #'s for the axles. If I were you, I would only swap out the drivers side, check out www.raxles.com they have great prices, and the owner is real understanding if you need to hold onto your old axles for a while. Good luck.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
9aj9
7th Generation Maxima (2009-2015)
5
Apr 5, 2020 12:11 AM
I<3 A32's
All Motor
1
Sep 10, 2015 11:07 AM
Maxboy23
5th Generation Maxima (2000-2003)
6
Sep 4, 2015 06:04 PM




All times are GMT -7. The time now is 10:14 PM.