We just got our second batch of 100 Pullies in Stock. To really help you guys out, we will go even lower this time.

Price is $75.00 per Pulley

The price includes the pulley, and super detailed installation sheet, along with needed belt sizes.

You can place an order via our website, www.rvmracing.com, or via paypal "DohcCivicNA1250@aol.com", or over the phone (516) 873-1464.

Price Per pulley is $75.00 shipped to your door inside the United States. To Canada, Alaska, or Hawaii, please add $8.00 for a total of $ 83.00

P.S. We finally got this bad boy Dyno'd, and with our luck, our damn scanner broke, we hope to have the Full, Real, Unaltered and Un-Played with Dyno sheets up in a week or so

If you will order thru the site, please make sure that when you check out you put "maxima.org" discount so we only charge 75.00.

Thank you all

 

75 i payed 80 nooooooooooooooooo

 

Does it come with that oil seal thing that everyone is complaining about? I would be realyl interested but don't want to fudge my car up.

 

eli i got the dynos up ..here is a link to the dynos with #'s ... and the #s dont lie this is a great product!

RVM Pulley Dynos Before and After


~James

 

how long will this deal last??(gotta wait til payday) ...most likely ill be in

 

can i order by credit card over the phone? Cause my paypal doesn't work.

 

I was wondering if someone could help me out. I got an RVM pully through somebody else, but they didn't have the installation sheet. Is it possible if someone could either e-mail or fax me the installation sheet for the RVM crank pully?

thanks

Libardo

FAX: (860) 240-7395
E-MAIL: libocasas@yahoo.com

 

We can gladly take Credit card over the phone, the # is 516-873-1464.

Libo, if you need the install sheet, PM us your fax #, we will gladly send it,

75.00 will last as long as this batch lasts.

 

just sent payment

 

you have PM

thanks

 

2 questions i have:

1)i typed in maxima.org in the discount box and it didn't work. is it not working yet or something?
2) also i didn't see a seperate box for the shipping address, where is it? my billing and shipping address are different.

Thanks for you help please respond ASAP i want to order one before they run out.

 

put "maxima.org" in where "you were reffered by.

 

i will order 1 next week.

 

these fit on 2k3s also rite?

 

these are the ones that fit 4th gens right?

 

Why isn't the shipping info page working? it just skips right over it. anybody else having this problem. I don't see anything to click that says to have billing and shipping info the same. I even tried altering the address to go to page 2 instead of 3 and it just goes back to page 1.

 

I want in

 

how hard are these to install? tools?

Thanks,

Scott

 

i am curious about this too.....

 

i want this pulley . Were do i send the money order to . Please semd me an email if you could of all the information i need . THANKS

 

You can read about a pulley here...and how to install it

http://www.greghome.com/Greg's%20Garage/1999%20Nissan%20Maxima%20SE/Underdrive%20Pulley.htm

-Chris

 

i have sent payment. I gotta see if the 6-8 horsepower gains for myself. Will this mod improves your quarter mile times? thanx

 

Server's down...

Does this work for the 4th gen?

I'd like one...

 

this will fit on 2000 maxima right?? wut do i need for this to be installed do i need to change the belt?

 

Link doesn't work, anyone with link/infor on installation, etc on this pulley or similar?

 

ok so this comes w/ everything we need...belts and stuff?..if so....75 shipped...where should i send the MO? and what other information do you need when i send it? colors?
holla

 

No.
None.

 

thanks dohcivic for setting up this group deal. got my tracking number thats its being shipped. Thanx again, jayar

 

Doesn't really give instructions on how to install it.

 

did anyone else who got the RVM UDP have any problems after installing it? I had a hard time starting my car now. it was so bad i put my stock pulley back on.

 

I'm having a hell of a time tensioning these belts properly.
My car has been screaming mad for over a month now. Work in progress. None the less, this is a great mod for the dollar.

 

what is the difference between the RVM pulley and the Unorthodox pulley? i know stillen always charges way more than they have to, put a $100 difference in price makes one wonder. thanks for your help!

n1cK!

 

Sorry if these are dumb questions, but I can't read page 2 of this thread. Are these pulleys still available and are they available for a 2002.

 

Installation Instructions (With Photos) are available on my web-site.

Maxima UDP Installation Instructions

 

i got a cranksensor code and i have a hard time starting my car. Any suggestions would help alot. Does anyone else have any problems installing the rvm?

 

Did your RVM come with a timing ring? If not, that's probably the problem. If so, is it possible that you didn't seat the pulley all the way against the crankshaft? Or maybe you forgot to oil. All of these could cause an imbalance on the crankshaft, thereby throwing a code. The oil is not likely to throw a code, but it's needed in order for the reduction of friction, which could throw a code.

Also, check the tension on your belts. You may have one too tight and the other too loose. This happened to me when I did mine and I threw a code as well. I fixed the tension and reset the code and everything was good.

 

Is the timing ring the one with the edges sticking out . And the cel went away when you reset the ecu?? thanx i will have it checked out.

 

i'm interested in this as well but want to know if those of u wit problems solved the problems

what else u have to buy with this for it to be fully functional

and i cant read dyno's , how much hp and torque are we looking at gaining wit this mod? i read that u feel it with auto, and with 5 speed u feel it even more

 

I installed my pulley a few days ago. I was having major problems. I removed the UDP and took off the timing ring. I lined the ring up with the stock pulley and it seems that the double tabs are off a bit. I sent the ring back. hope to have a correct ring sent back to me soon.

 

You'll need the belts. I've listed them on my homepage under the UDP Installation write-up.

The average gain is about 6 HP to the wheels.