Hi, my username is ___,and I can get 100 MPH in the 1/4 Mile.
Hi, my username is ___,and I can get 100 MPH in the 1/4 Mile.
Hey, I have been wondering what mods it takes to get 99-100 MPH in the 1/4 mile in a 4th Gen. If you can achieve this amazing feat, list your mods if you dont mind.
Im looking for 4th Gen setups, but if you have another generation maxima you can put yours down just remember to specify your model max, and mods.... thanks.
Im looking for 4th Gen setups, but if you have another generation maxima you can put yours down just remember to specify your model max, and mods.... thanks.
96 SE 5 speed
MEVI
hacked stock airbox with K&N filter panel
non-mandrel y-pipe
RT cat
2001 Maxima muffler
UDP
JWT ECU
15s in the front with H-rated tires
17s in the back
no gutting
1/3 tank of gas
no powershifting
14.45@99.5mph with a 2.3 60' at 1200' above sea level in 50 degree weather. If I would have run at a sea level I would have been closer to 101mph.
Dave
MEVI
hacked stock airbox with K&N filter panel
non-mandrel y-pipe
RT cat
2001 Maxima muffler
UDP
JWT ECU
15s in the front with H-rated tires
17s in the back
no gutting
1/3 tank of gas
no powershifting
14.45@99.5mph with a 2.3 60' at 1200' above sea level in 50 degree weather. If I would have run at a sea level I would have been closer to 101mph.
Dave
Originally posted by Quicksilver
Only 14.45 at 99.51? Hmmm...must be the alt where you are.
Only 14.45 at 99.51? Hmmm...must be the alt where you are.
Dave
You're not getting there without:
a) MEVI and ECU and luck
b) cams and/or other engine work if no MEVI/ECU
c) a car that weighs about 2600lbs with you in it
What happened to the thread you posted yesterday about this that I posted in. I can't find it now.
a) MEVI and ECU and luck
b) cams and/or other engine work if no MEVI/ECU
c) a car that weighs about 2600lbs with you in it
What happened to the thread you posted yesterday about this that I posted in. I can't find it now.
What happened to the thread you posted yesterday about this that I posted in. I can't find it now.
wasnt getting any exposure.. thanks for the input, your carsdomain site is cool as well.
wasnt getting any exposure.. thanks for the input, your carsdomain site is cool as well.
Originally posted by ThurgoodJenkins
I trapped 103 stock =)
I trapped 103 stock =)
Originally posted by 96sleeper
103 is a little slow for an ls1, my buddy trapped 108-109 with just a lid, and now 115 with headers and exhaust added.
103 is a little slow for an ls1, my buddy trapped 108-109 with just a lid, and now 115 with headers and exhaust added.
Originally posted by ThurgoodJenkins
Let me guess, his is an 01-02 6spd? Well I have a 98 auto, the slowest LS1 of the bunch. So I wouldn't consider it slow, especially coming from you.
Let me guess, his is an 01-02 6spd? Well I have a 98 auto, the slowest LS1 of the bunch. So I wouldn't consider it slow, especially coming from you.
Originally posted by 96sleeper
actually it is a 2000 6spd without the ls6 intake. And, I trap 98 mph with an automatic 3.0 Liter with bolt-ons. I could probably pull you with a 30 shot of nitrous.
actually it is a 2000 6spd without the ls6 intake. And, I trap 98 mph with an automatic 3.0 Liter with bolt-ons. I could probably pull you with a 30 shot of nitrous.
Judging by your sig, you have 2 seconds to make up. I didn't know a 30 shot could do that
well after checking out these post, im finishing up the mods i have already ordered and im going to work on getting the ecu for the max. since im not going turbo or sc the JWT ECU and the MEVI seem to be the most important mods to increase speed and get good times.
Originally posted by Y2KSESteve
We have two 6 speeds in phoenix that trap over 100 mph and one trapped over 102 NA.
We have two 6 speeds in phoenix that trap over 100 mph and one trapped over 102 NA.

Dave
I still want a 4th Gen, preferably 97-98, Maxima SE to play with. I think that 100 m.p.h. trap speeds are possible without taking out seats to reduce weight, but you will need the mods that Dave mentioned, and very cool or cold weather.
If I can find a Maxima for the right price, I'll be back in the hunt, but I am keeping my other two cars. Especially since on of them could trap 106-107 stock, although its not stock anymore, and the motor is receiving 3 mm Apex seals and being ported while being rebuilt.
Now if someone would sell me a 97-98 SE 5 speed for around $6K
MY GTP needs a 3.25 pulley, PCM, and Intake, but the tranny is on borrowed time having 120K original miles on it, so I am going to wait to do those mods, until after the tranny gets rebuilt.
If I can find a Maxima for the right price, I'll be back in the hunt, but I am keeping my other two cars. Especially since on of them could trap 106-107 stock, although its not stock anymore, and the motor is receiving 3 mm Apex seals and being ported while being rebuilt.

Now if someone would sell me a 97-98 SE 5 speed for around $6K

MY GTP needs a 3.25 pulley, PCM, and Intake, but the tranny is on borrowed time having 120K original miles on it, so I am going to wait to do those mods, until after the tranny gets rebuilt.
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
Apr 16, 2020 05:15 AM





