oh no! i'm forced to be a ricer for 1 day =(
oh no! i'm forced to be a ricer for 1 day =(
i attempted to install my new magnaflow muffler within 30 minutes, but it turned out tat some of my bolts were so rusted and i couldn't take them off. i have to go work in like 5 minutes so i'm leavin the b-pipe and the muffler bolts open. when i started the engine it sounded sooo loud! 
i will get back to u guys about magnaflow muffler. perhaps a review on vqpower.com as well.
i will get back to u guys about magnaflow muffler. perhaps a review on vqpower.com as well.
sounds like when I put my y-pipe on and had no extra burnt 02 sensor to plug the additional hole...it sounds very bad all the way home...and luckily I found one the next day and have been much happpier without all the noise.
Originally posted by KLoWnPR109
I ran open exhaust from the Y back today, nothing wrong with that. Of course, my car is up on jackstands and I just wanted to see how loud it was
I ran open exhaust from the Y back today, nothing wrong with that. Of course, my car is up on jackstands and I just wanted to see how loud it was
recommend for people who wants to rice ur max up for 1 day!
Joined: Aug 2000
Posts: 4,857
From: San Bruno, Petaluma, SF Bay area
i dunno Kevin
sounds like your a ricer more cause your mods are "tighten throttle cable" and all that pedals, air freshner, Altezza, mirror and neon rod stuff....
haha
sounds like your a ricer more cause your mods are "tighten throttle cable" and all that pedals, air freshner, Altezza, mirror and neon rod stuff....
haha
Originally posted by Turbo95Max
i dunno Kevin
sounds like your a ricer more cause your mods are "tighten throttle cable" and all that pedals, air freshner, Altezza, mirror and neon rod stuff....
haha
i dunno Kevin
sounds like your a ricer more cause your mods are "tighten throttle cable" and all that pedals, air freshner, Altezza, mirror and neon rod stuff....
haha
tightened throttle cable >> it's a minor mod, how is tat rice?
pedals >> it was a group deal! everyone got it for a good price.
air freshner >> who wants to get into ur car tat smells like poop?
altezza >> 95-96 didn't mass produce red/clear, or else i'll jump on tat. plus i got it for $41 from procarparts!
mirror >> i have eye problem, therefore i need better mirror to see who is behind me.
neon rod stuff >> okie i'm a rice
Joined: Aug 2000
Posts: 4,857
From: San Bruno, Petaluma, SF Bay area
lame excuses....haha
how does tightening the throttle cable qualify as a mod? might as well list your different types of hose clamps, brand of gas, and removed gas pedal stopper as mods too.
bout the air freshner thing...i dunno bout you but my car never smells like poop and i dont need an air freshner....everything else need not reply.
how does tightening the throttle cable qualify as a mod? might as well list your different types of hose clamps, brand of gas, and removed gas pedal stopper as mods too.
bout the air freshner thing...i dunno bout you but my car never smells like poop and i dont need an air freshner....everything else need not reply.
Originally posted by happyricefob
lol! i have reasons!
tightened throttle cable >> it's a minor mod, how is tat rice?
pedals >> it was a group deal! everyone got it for a good price.
air freshner >> who wants to get into ur car tat smells like poop?
altezza >> 95-96 didn't mass produce red/clear, or else i'll jump on tat. plus i got it for $41 from procarparts!
mirror >> i have eye problem, therefore i need better mirror to see who is behind me.
neon rod stuff >> okie i'm a rice
lol! i have reasons!
tightened throttle cable >> it's a minor mod, how is tat rice?
pedals >> it was a group deal! everyone got it for a good price.
air freshner >> who wants to get into ur car tat smells like poop?
altezza >> 95-96 didn't mass produce red/clear, or else i'll jump on tat. plus i got it for $41 from procarparts!
mirror >> i have eye problem, therefore i need better mirror to see who is behind me.
neon rod stuff >> okie i'm a rice
me =(
Guest
Posts: n/a
Re: oh no! i'm forced to be a ricer for 1 day =(
Originally posted by happyricefob
i attempted to install my new magnaflow muffler within 30 minutes, but it turned out tat some of my bolts were so rusted and i couldn't take them off. i have to go work in like 5 minutes so i'm leavin the b-pipe and the muffler bolts open. when i started the engine it sounded sooo loud!
i will get back to u guys about magnaflow muffler. perhaps a review on vqpower.com as well.
i attempted to install my new magnaflow muffler within 30 minutes, but it turned out tat some of my bolts were so rusted and i couldn't take them off. i have to go work in like 5 minutes so i'm leavin the b-pipe and the muffler bolts open. when i started the engine it sounded sooo loud!
i will get back to u guys about magnaflow muffler. perhaps a review on vqpower.com as well.
what part of that paragraph made you a ricer
I dont get it 
or the magnaflow exhaust is going to make you be a ricer
Guest
Posts: n/a
I am lost help me please, or I want attention
Originally posted by happyricefob
i attempted to install my new magnaflow muffler within 30 minutes, but it turned out tat some of my bolts were so rusted and i couldn't take them off. i have to go work in like 5 minutes so i'm leavin the b-pipe and the muffler bolts open. when i started the engine it sounded sooo loud!
i will get back to u guys about magnaflow muffler. perhaps a review on vqpower.com as well.
i attempted to install my new magnaflow muffler within 30 minutes, but it turned out tat some of my bolts were so rusted and i couldn't take them off. i have to go work in like 5 minutes so i'm leavin the b-pipe and the muffler bolts open. when i started the engine it sounded sooo loud!
i will get back to u guys about magnaflow muffler. perhaps a review on vqpower.com as well.
what part of that paragraph made you a ricer
I dont get it or the magnaflow exhaust is going to make you be a ricer
Thread
Thread Starter
Forum
Replies
Last Post
tarun900
4th Generation Maxima (1995-1999)
19
Dec 20, 2021 06:57 PM
My Coffee
New Member Introductions
15
Jun 6, 2017 02:01 PM
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
Sep 29, 2015 02:02 PM