I put bi-xenon projectors into my headlights and I need help on how to wire them. Do I connect them to high-beam wire?

Thank you!

 

what type of bulb is it? d2s? 9004? or h4? either way your going to need a harness or splicing will be needed. bi-xenon(both low beam and high beam) your going to need to wire both wires, they both share the same ground get a haynes manual it ill tell you what wire is what..

 

it's a d2r bulb. i know im suppose to use d2s for projectors but d2rs came with the projectors.

 

You need to get familiar with www.hidplanet.com and radio shack. You need a DIODE in order to wire it properly. I believe the correct # for that is 1004 (crap I forget now) Regardless, the info you need is on the site above.

 

i used a 1N4005 i believe.

 

thanks you.

 

i just bought the diode, now how do i wire it? thanks in advance for your help guys.

 

did you go to the site I referenced? You do have to do a little research, this will not just fall on your lap