General Maxima Discussion This a general area for Maxima discussions for all years. For more specific questions, visit one of the generation-specific forums.

Ok who wants to help me liberate some parts.

Thread Tools
 
Search this Thread
 
Old Apr 10, 2005 | 08:27 AM
  #1  
plurco's Avatar
Thread Starter
Donating Maxima.org Member
iTrader: (1)
 
Joined: Dec 2002
Posts: 1,628
Ok who wants to help me liberate some parts.

I am looking to remove anything under the engine compartment that is not needed for WOT operation. This week all the HVAC, AC, and PS crap is getting the boot. That should be 100LBS+ in addition to freeing up a few ponies. I am looking to remove everything that I don't need under the hood. I just don't want to scrap something that I may need for normal operation. I have a 2 week 200lbs goal, which I think will be nooooo problem since that is pretty well what I mentioned before in addition to he front and rear bumper braces. Throw in the fact that next week I am putting it on the rack and stripping anything I can from the undercarriage, and I have started gutting the doors (pics soon)
So let’s hear it, any other creative weight reduction ideas? From my last outing I estimate the car to be at 2600lbs right now. That comes from using one of many calculators on the net and entering my Friday night results of 14.2 and a conservative HP rating of 180.
Old Apr 10, 2005 | 08:29 AM
  #2  
plurco's Avatar
Thread Starter
Donating Maxima.org Member
iTrader: (1)
 
Joined: Dec 2002
Posts: 1,628
Ok, whoever it was that suggested to use an air chisle to remove sound deadening had a great idea. I remove it all in under 1 hour in 70+ degree weather. However the weight saving for this was somewhat over estimated. It was only good for 20lbs.
Old Apr 10, 2005 | 08:29 AM
  #3  
naijai's Avatar
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Jun 2002
Posts: 1,076
take out the engine thats a good weight saver
Old Apr 10, 2005 | 08:33 AM
  #4  
Ceasars Chariot's Avatar
Old Maxima Legend
iTrader: (16)
 
Joined: Apr 2003
Posts: 6,058
From: Paraparaumu, NZ
plurco take photos of the front and rear bumper removal, and keep a weight reduction list, heck start a cardomain page with all this info. to much going on not to keep track of it. would make a great resource
Old Apr 10, 2005 | 08:51 AM
  #5  
plurco's Avatar
Thread Starter
Donating Maxima.org Member
iTrader: (1)
 
Joined: Dec 2002
Posts: 1,628
Originally Posted by the chariot
plurco take photos of the front and rear bumper removal, and keep a weight reduction list, heck start a cardomain page with all this info. to much going on not to keep track of it. would make a great resource
I got ya covered man I am just trying to get up enough photos to make it a good post. Probably end of next week.
Old Apr 10, 2005 | 09:23 AM
  #6  
plurco's Avatar
Thread Starter
Donating Maxima.org Member
iTrader: (1)
 
Joined: Dec 2002
Posts: 1,628
Front bumper brace with fog lights = 27lbs.
Old Apr 10, 2005 | 01:08 PM
  #7  
liqidvenom's Avatar
brotherhood of tq
iTrader: (6)
 
Joined: Jul 2003
Posts: 8,849
y not permantly remove the back seat? 14.2 is a great time
Old Apr 10, 2005 | 01:12 PM
  #8  
plurco's Avatar
Thread Starter
Donating Maxima.org Member
iTrader: (1)
 
Joined: Dec 2002
Posts: 1,628
Originally Posted by liqidvenom
y not permantly remove the back seat? 14.2 is a great time
Man that has been long gone. I will get some pics of the car up later today to let everyone know where I am at.
Old Apr 10, 2005 | 03:02 PM
  #9  
Maxima_Joe's Avatar
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
i still see the cruise control in one of your pics. Do you need an e brake if not get rid of that.
Old Apr 10, 2005 | 06:19 PM
  #10  
Broaner's Avatar
2060lbs and falling...
iTrader: (10)
 
Joined: Jan 2003
Posts: 5,155
From: Madison, WI
Originally Posted by fanaticrockford
i still see the cruise control in one of your pics. Do you need an e brake if not get rid of that.
Dammit, I was gonna say those things. Sunroof assembly still in?

Its a bit of work but the big rubber washers that go around the motor mounts. There are 8 of them. Good for at least a pound.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
user 11122324
5th Generation Maxima (2000-2003)
42
Jul 18, 2022 03:35 PM
Pied
4th Generation Maxima (1995-1999)
0
Sep 26, 2015 03:29 PM
2kmaximel
5th Generation Maxima (2000-2003)
5
Sep 16, 2015 03:19 PM
Lowered_a33
5th Generation Maxima (2000-2003)
1
Sep 10, 2015 09:41 PM




All times are GMT -7. The time now is 02:27 AM.