baughb

Anyone have problems when going from factory cloth to power (non heated) leather? It all plugged in properly, but wont move. Is there a fuse/relay im missing?

ThisMaxIsTight

iTrader: (23)

i did the front seat swap...those plugs that connect to each other are really tuff to push together...make sure they SNAP into place...and make sure you have the right plugs in the right holes ... should work

baughb

should..... still no dice. I can move them all manualy (with a battery), so I know its not the motors, maybe the damned relay box thing next to the seat

Ceasars Chariot

iTrader: (16)

hmm, i swapped some 96 leather to replace my 97 leathers and had the same problem at first, rechecked and had to snap the power in good as well

baughb

just the two plugs under the seat right??? =(

baughb

anyone have the interior wiring diagram? I dont have any power to the seat plug

baughb

bumpidy bump
Checked all fuses, rechecked connections

if I put power to the seat relay using a jump box, it all functions. Is there a connection/something Im missing?

maxkid123

iTrader: (4)

i have the same problem dude i cant figure it out to save my life...

njmaxseltd

iTrader: (19)

Did you check for power at the plug with a meter?

MikeB

It worked for me '99 seats into '98. I agree meter it out ck for power, ground is good. Heated portion I believe is separate plug which I don't have, but my Max is going to stay out of the cold this winter I hope.

KRRZ350

iTrader: (29)

The power wire on the low power side of that relay? My geuss is it runs through a key-on fuse that wasn't installed from the factory.

pmohr

iTrader: (26)

There's a circuit breaker for the factory power seats that indeed isn't installed in cars that weren't equipped with power seats.

Actually, this just came up the other day - http://forums.maxima.org/4th-generat...her-seats.html