4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Tail light goop and other light question

Thread Tools
 
Search this Thread
 
Old Sep 10, 2005 | 07:13 PM
  #1  
leojs's Avatar
Thread Starter
Member
 
Joined: Sep 2003
Posts: 70
Tail light goop and other light question

Hello all,

I'm changing my tail light because one cracked. When I removed the cracked tail light, it wouldn't pull out easily because when the prior owner put in the modified clear/red tail light-- he apparently gooped a bunch of what looks like roofing tar or some crap on it.

Is that really needed? Is there supposed to be a gasket there or something? That crap got all over me, the tail light, the car, what a mess.

Anyway, I wanted to make sure it will be ok if I DON'T put all that goop back on or use a gasket. If I need one, I'd like to buy one vs. using that messy crud.

please see this link for a photo of what I mean, and also a photo of my new clear/red tail from custommaxima.com:

http://calvinsquire.com/Gallery/album02

Also, I noticed in testing my lights, the clears on the inside of the tails, and the clears on the front sides... they don't seem to light up at all. Are they supposed to? Maybe the bulbs are just blown. They don't do anything when I have my lights on, turn signal, reverse, nothing... see photos at above link.

Thanks all!
Old Sep 10, 2005 | 07:17 PM
  #2  
DuMKuH's Avatar
Senior Member
iTrader: (14)
 
Joined: Mar 2005
Posts: 1,186
From: Brooklyn,NY
That goopy crap is a sealant so the water wouldn't be able to get inside where the housing is. So the answer is YES you DO need it there. And you were supposed to get it with your new tail lights just separatly.
Old Sep 10, 2005 | 07:19 PM
  #3  
DuMKuH's Avatar
Senior Member
iTrader: (14)
 
Joined: Mar 2005
Posts: 1,186
From: Brooklyn,NY
And for the lights-check the bulbs first it IS supposed to light up clearance and back up lights.....
Old Sep 10, 2005 | 07:28 PM
  #4  
leojs's Avatar
Thread Starter
Member
 
Joined: Sep 2003
Posts: 70
Ah, well-- got the lights from custommaxima.com, freakin $170 just to replace one tail because they only sell pairs. They didn't include the goop. Anything I can go get at an auto store? I would think... looks like it has a channel though for like a nice rubber gasket vs. the goop... as a matter of fact, it almost looks like there used to be a gasket on there maybe originally.
Old Sep 10, 2005 | 11:04 PM
  #5  
DuMKuH's Avatar
Senior Member
iTrader: (14)
 
Joined: Mar 2005
Posts: 1,186
From: Brooklyn,NY
That same goop has been there originally(that channel has been made just for that), and try Auto store or Home Depot for that stuff
Old Sep 10, 2005 | 11:14 PM
  #6  
chenzarino's Avatar
Senior Member
iTrader: (2)
 
Joined: Oct 2004
Posts: 910
THe goop is solid when you put it on, it looks like weatherstripping. It melt sinto goop from the heat. Sticks to EVERYTHING. but is def. necessary
Old Sep 11, 2005 | 12:14 AM
  #7  
MDeezy's Avatar
Senior Member
iTrader: (27)
 
Joined: Feb 2004
Posts: 33,701
From: Atlanta
Originally Posted by RETARD
What The Hell You Talkin Bout Willis???? I Helped My Dog Down The Street With His Tailight Switch Out And He Had That Black S_hit All Over The *******-ing Place... You Dont Need That Crap, Your Soooo Retarded That You Should Eat It Because If You Didnt Know That Black Stuff Is Candy! So Go Get A Life And Use Common Sense You A-s-s-hole!!!! You Suck

You must be drunk. Either that or just ignorant.
Old Sep 11, 2005 | 12:28 AM
  #8  
MDeezy's Avatar
Senior Member
iTrader: (27)
 
Joined: Feb 2004
Posts: 33,701
From: Atlanta
if I have the worst car made then, that would apply to a whole lot of people on the org here. Why dont you do us all a favor and spray some water to the inside of your computer case. . . dont worry it should help clean out your system
Old Sep 11, 2005 | 12:33 AM
  #9  
MDeezy's Avatar
Senior Member
iTrader: (27)
 
Joined: Feb 2004
Posts: 33,701
From: Atlanta
and I was really wondering why you choose such a screen name. Good night
Old Sep 11, 2005 | 12:42 AM
  #10  
86maxima96's Avatar
I Broke OT
iTrader: (10)
 
Joined: Apr 2005
Posts: 4,665
Originally Posted by RETARD
I Chose This Screen Name Because It Says What Everyone On This Site Is... A ******* Retard!!!!! You Suck

you give all car enthusiasts a bad name. nock it off.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vingodine
5th Generation Classifieds (2000-2003)
45
May 21, 2016 12:46 PM
tommy20020
8th Generation Maxima (2016-)
2
Jan 6, 2016 04:05 PM
4doorGTR
7th Generation Maxima (2009-2015)
13
Sep 11, 2015 04:09 PM
Sir Tilus
7th Generation Maxima (2009-2015)
2
Aug 30, 2015 08:33 PM




All times are GMT -7. The time now is 04:30 AM.