All Motor All Motor Advanced Performance. Talk about Engine Swaps, Internal Engine work. Not your basic Y pipe and Intake Information.
Sponsored by:
Sponsored by: CARiD

Clutch problem...

Thread Tools
 
Search this Thread
 
Old Oct 26, 2005 | 12:29 PM
  #1  
JClaw's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (17)
 
Joined: Aug 2004
Posts: 5,433
From: Montreal, Qc, Canada
Clutch problem...

I have had the clutchnet 6-puck since I put the VQ35 in (put about 6000 hard miles on it (lots of drag racing and some street racing)) and today after a 2nd gear WOT run it suddenly slipped. I parked the car a few hundred feet away because NONE of the gears work, literally. Even Reverse doesn't work. It just revs freely like it's in neutral.

Now I don't have much experience with manual cars, but damn, clutches don't suddenly die like that. It doesn't grab AT ALL, in none of the gears. I parked it there in hope that if I let it cool down for a few hours or even a day or two it might grab enough to get it back home (about 7-8 miles).

What gives? Anybody ever had that happen? It certainly isn't the tranny, all gears shift fine. Is it unrealistic to hope that it might grab if I let it cool down.

EDIT: It was the axle actually. The f*cker popped out. Is that ridiculous or what?
Old Oct 26, 2005 | 12:40 PM
  #2  
eng92's Avatar
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Oct 2002
Posts: 1,199
From: Ontario, Canada
Did any unusual noises accompany this event?
Is the force to depress your clutch pedal still the same?
Were you in the process of shifting gears when the engine started free-revving?

I have burned up a few clutches in the past and I could always smell them slipping long before they wouldn't grab at all.

Did you try engaging any gears without pressing the clutch in with the engine running?
Old Oct 26, 2005 | 12:44 PM
  #3  
Zack342's Avatar
Supporting Maxima.org Member
iTrader: (89)
 
Joined: Mar 2004
Posts: 6,226
From: Quincy, MA
Well sounds similar to what happened in my 240SX when a spring broke off the clutch and got wedged inbetween the flywheel and clutch disk so it couldn't engage. I am not sue if your 6 puck clutch has any springs on it but sounds like your broke something.
Old Oct 26, 2005 | 01:10 PM
  #4  
JClaw's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (17)
 
Joined: Aug 2004
Posts: 5,433
From: Montreal, Qc, Canada
Originally Posted by eng92
Did any unusual noises accompany this event?
Is the force to depress your clutch pedal still the same?
No and yes, respectively.

Originally Posted by eng92
Were you in the process of shifting gears when the engine started free-revving?
Nope, I was in 2nd.

Originally Posted by eng92
I have burned up a few clutches in the past and I could always smell them slipping long before they wouldn't grab at all.

Did you try engaging any gears without pressing the clutch in with the engine running?
I tried all gears with the car running, the shifter feels normal, seems all of them engage correctly.

Originally Posted by zack342
Well sounds similar to what happened in my 240SX when a spring broke off the clutch and got wedged inbetween the flywheel and clutch disk so it couldn't engage. I am not sue if your 6 puck clutch has any springs on it but sounds like your broke something.
Sprung hub.

Well the car will go unrepaired for this year, it goes in storage and that's that. I'm beginning to get temped by swapping a 04 6-speed tranny with the 4.13 final drive and a lightweight flywheel/clutch kit. I'm getting tired of opening up the old 5-speed, and tired of the notchy shifter and gear shredding.
Old Oct 26, 2005 | 01:38 PM
  #5  
SR20DEN's Avatar
VQ Wizard
iTrader: (7)
 
Joined: May 2002
Posts: 6,661
From: Charlotte, NC
Your ish came apart.
Old Oct 26, 2005 | 01:41 PM
  #6  
JClaw's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (17)
 
Joined: Aug 2004
Posts: 5,433
From: Montreal, Qc, Canada
'Ish'?
Old Oct 27, 2005 | 01:12 PM
  #7  
JClaw's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (17)
 
Joined: Aug 2004
Posts: 5,433
From: Montreal, Qc, Canada
Went back to start it up today... and now there is a weird sound when I release the clutch, like something came loose and fell.

What exactly is an "ish"?
Old Oct 27, 2005 | 01:40 PM
  #8  
Nealoc187's Avatar
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
Ish is ****.
Old Oct 27, 2005 | 02:05 PM
  #9  
deezo's Avatar
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Apr 2001
Posts: 14,285
From: FV, NC
Originally Posted by JClaw
Went back to start it up today... and now there is a weird sound when I release the clutch, like something came loose and fell.

What exactly is an "ish"?
You ever hear shyte played backwards?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
user 11122324
5th Generation Maxima (2000-2003)
42
Jul 18, 2022 03:35 PM
hez8813
5th Generation Maxima (2000-2003)
11
Mar 12, 2020 12:06 AM
spencerwh1
Maximas for Sale / Wanted
4
Jun 30, 2016 05:44 AM
BkGreen97
Maximas for Sale / Wanted
2
Apr 2, 2016 05:47 AM
carlosvq30
5th Generation Maxima (2000-2003)
4
Sep 26, 2015 09:44 AM




All times are GMT -7. The time now is 12:21 PM.