low numbers why??? 163.3hp 182.99tq on a 2001 auto on 18"s
mods are cattman cali spec y pipe, injen cai, ground wires, safc 2, RT high flow cat, custom catback, UR udp, timing advance


looks like vias is opening but it stops at 5500rpm why ??
anything else that could give me low numbers ??
could it be because of the 18"s that are about 50 w/ tires ??
pls any input will be helpfull

 

Your VI is What did you tune for with the SAFC?

Gnd wires, high flow cats, Injen CAI are snake oil IMO

Do you have the runfiles?

 

Dooooo you have runfiles? If not could you scan a closer picture or something..

 

VI is broken or almost broken.

 

cant really get better pictures but blue is #2, red # 4 and green#7, i tuned the afr to about 13.5 on the last run. thanks for the input. I will take apart my vias tonight. oh yea i almost forgot i also have a timing advanced to 17

 

What was the correction factor (off of my own curiousty)

 

according to printout CF: SAE smoothing: 5

 

Yeah im with them, your VI is def prolly broken... JB Weld Mod !

 

just did the jb weld mod, hope it works.

 

was your vias cup loose?

 

Not the smoothing The actual correction factor ... i.e 1.01, .98 SAE

 

not exactly sure what cf is then, anyway when i checked my vias it was loose, but not anymore after jb weld. I'll just have to get it dynoed again to see if the fix worked.

 

Look at the run condition details (in different colors).. on the sheet

 

why don't you tune it down to a 13.1? you could have a better setup with that - at least i laid out 191whp with my sentra on a 13.1 afr

 

I bet it wont make up for his broken VIAS.

 

ill try that.

 

finally fixed vias, got 179 hp and 183 tq ill post some pics of the dyno when i find my camera.

 

Sweet...

Did you get the run files by chance?