what should i do to make my cruise control working after 5 spd swap. same thing with my traction control??
any ideas??

 

anyone knows??

 

very good questions.. im interested too
I know the 5speed swap diy mentions something about the cruise control but i dont know about TCS

 

I thought TCS manipulated the brakes and was independent of the ECU and transmission. How would the car electronics even know that you are automatic or manual ... shouldn't matter. Cruise control will work after you swap. The thing is that people need to wire the cruise control cut-off in-series with the brake cruise control cut-off to prevent any accidents.

 

i got this if that could help
anyone please??

 

Since when do 4th gens have traction control? Is there some package that nissan had that I dont know about? Maybe the Canada package with the VLSD tranny had TC and I dont know of this?

 

It was an option on MY1999

 

Remember the '99 was like a new car. There are MANY features on the '99 that emulate the 00-01 such as electric EGR ... and a nice TCS feature. Oh might I forget to mention ... extra restrictive emissions crap.

TCS was for '99 only.

 

is the traction control good? and also i dont see y the swap would affect it unless the ecu was affected

 

there's a switch the clutch pedal presses against when it's fully released. you need to wire that switch in series with the switch the brake pedal presses against. i have some advice from my experience w/ the 5spd conversion here:
http://forums.maxima.org/showpost.ph...69&postcount=1

that way when the cruise is on, it turns off if you tap either the brake or clutch.

 

mine doesnt. it gets ready after i press button on dash (green light goes ON) but i cant set a speed when i press SET on my steering wheel (cruise light doesnt go ON)

 

There must be a switch that goes to the transmission. The BCU must think that the car is in Park or Neutral.

http://www.vqpower.com/v2/modules.ph...howpage&pid=30