well heres some pics not the best quality of my RSX seat install . only drivers in so far thats why carpets out much welding to be done for the passenger side.

i literally have rsx mount points now so i can use any stock or aftermarket RSX seat

also 98seblackmax gave me the idea to relocate my washer fluid resovoir and relocate the relay box by the PS resovoir.

the relay box being moved to the drivers tower saves weight and amount of energy needed in the wires.
the washer is moved to the trunk for weight distribution and cleaning the engine bay out.this is shown in the pics also.

got some good ideas and followed through the seat thing ive wanted to do for a few years once the other seats in ill get some vid of the interior with the carpet in . and some full throttle runs

http://s186.photobucket.com/albums/x225/krismax/

 

Just curious, but why didn't you just drill into the original bracket? Granted, I know that our four bolts on the sheet metal of the floor aren't exactly all that safe, but wouldn't it have been much easier?

 

nice man. Ive always wanted to use different seats..the maxima seats have like no bolsters lol. Is there a right up on this?

 

cool. Did you always have black interior? I'm looking into some seats myself but having beige sucks for aftermarket seats.

What's the weight difference of the seats?

 

ive always had the black interior.


as for the weights the stock 96 cloth manuel seats are around 39-42 lbs a piece driver being the hevier of the two.

and the rsx leather manuel seats with the airbags taken out,seat sensors ,and ecu in seat and bose amp under seat and last pretensioner seat clips. with all this stuff removed it took over 10lbs off both total.
also keep in mind rsx seats are much stronger than my stock 96 seats.

rsx driver seat 46 lbs 4oz
rsx passenger seat 40 lbs 12 oz

iam fine with this they feel so solid and suportive compared to the stock max seats . and the seating position feels like a sports car now not a family car.

and like i said i can use any rsx aftermarket seat so when i race i will be bolting in a race seat and taking out the pass for racing.

 

great job!!!!! some pix of the actual welding work for the mounting points would be very useful.

Those seats look amazing on there krismax

 

thanks ive been holding off on more pics until i get a camera .those pics were with a dvd camcorder.

when i get the other side done ill take many pics and make sure the pics are good ,ill also take pics of other side because i need to paint the fresh metal yet.

 

well your doing something that alot of people want to do... get rid of the stock seats.

Lets face it, the 4th gen Maxima's target market was a middle-aged male... our seats (IMO) are made for a slightly overweight man lookin for comfort. I think the seats are comfy, but they offer no support for the driving that some of the enthusiasts in here put their cars through.

 

The bracket mounting points are key to the aftermarket. I'm sure you can get a custom mount but asking the chair manufacturer to do such a thing will cost $$.

Interested to see some of the welding pics.

 

yeah iam not sure what your saying here or to whom but these rsx seats will unbolt and bolt in just like a stock rsx and the rsx has great stock seats and aftermarket avaliable.
and this is exactly why i choose rsx seats

 

hey krismax, now that you've had the seats for a few weeks, you got any more impressions for us? (and maybe a few pix of the actual braketry )

 

I agree. the RSX seats are so sweet. Id trade in my 350z seats for them anytime, Those or the S2k's.

 

In for pics, especially of the mounts.

 

I will admit i love how my S2K hold my body in place when cornering...that'll be something i work on in the maxima

 

RSX seats hold you in well and look great, but IIRC they're a bit lacking when it comes to comfort...

The Maxima is not a sports car. It's a sporty sedan. Personally I wouldn't put racing seats in it, but I'd consider some comfy sporty seats, which is more than I can say for the stockers...

 

well i love the seats, but i think i have to much polish on the seat, because i slide alittle.

as for more pics i need to borrow a freinds digital cam because as you can see the camcorder takes awful pics. and also iam waiting for a clear day . seems to rain on days off.

 

lolz, sounds good. The org shall be on standby :-D

 

heres some pics guys some before mounts were painted some after and some others photo bucket has more

http://i186.photobucket.com/albums/x...x/DSCN0056.jpg

http://i186.photobucket.com/albums/x...x/DSCN0083.jpg

http://i186.photobucket.com/albums/x...x/DSCN0081.jpg

http://i186.photobucket.com/albums/x...x/DSCN0079.jpg

http://i186.photobucket.com/albums/x...x/DSCN0067.jpg

http://i186.photobucket.com/albums/x...x/DSCN0073.jpg

http://i186.photobucket.com/albums/x...x/DSCN0058.jpg

http://i186.photobucket.com/albums/x...x/DSCN0029.jpg

http://i186.photobucket.com/albums/x...x/DSCN0025.jpg

 

nice pictures! I think this should be included on the How-To stickies. There's enough info on here to be able to take the seats and explain it to a welder what needs to be done and show the person the pictures. Dont really NEED a step-by-step guide, as 98% of people here dont know how/ dont have a welder themselves. Awesome work chris!