What parts needed to lower Maxima??
Thread Starter
Joined: Aug 2000
Posts: 1,120
From: Miami, FL
What parts needed to lower Maxima??
My struts have been crappy for over a year, so i'm going to replace them and lower the Max at the same time.
Other then the new struts and the lowering springs is there anything else that needs to be replaced when lowering a Maxima? Its a 99 BTW.
Other then the new struts and the lowering springs is there anything else that needs to be replaced when lowering a Maxima? Its a 99 BTW.
http://forums.maxima.org/showpost.ph...29&postcount=3
Look through those to see if they answer your question.
Look through those to see if they answer your question.
if you want to drop your car anywhere below 2 inches and dont mind spending a bit more you should get coilovers
i have k sport coilovers and although they ride harsher( because im so low) they make my car look and handle so much better
total cost of them for me was 650 (cad)used and i installed them myself( they actualy make installation easier becaue you dont need to compress the spring to put them on the new strut. So all you need 2 do is remove 2/3 bolts, remove the old strut and put new strut in a bolt up
i have k sport coilovers and although they ride harsher( because im so low) they make my car look and handle so much better
total cost of them for me was 650 (cad)used and i installed them myself( they actualy make installation easier becaue you dont need to compress the spring to put them on the new strut. So all you need 2 do is remove 2/3 bolts, remove the old strut and put new strut in a bolt up
Thread
Thread Starter
Forum
Replies
Last Post
TonyJr
3rd Generation Maxima (1989-1994)
4
Aug 20, 2015 12:14 AM
cmpowell86
6th Generation Maxima (2004-2008)
1
Aug 10, 2015 12:35 AM
laparka66
7th Generation Maxima (2009-2015)
16
Aug 6, 2015 09:36 AM
BassAddictJ
7th Generation Maxima (2009-2015)
5
Aug 4, 2015 11:38 AM




