4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

What parts needed to lower Maxima??

Thread Tools
 
Search this Thread
 
Old 07-15-2007 | 07:25 PM
  #1  
JUDE's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (7)
 
Joined: Aug 2000
Posts: 1,120
From: Miami, FL
What parts needed to lower Maxima??

My struts have been crappy for over a year, so i'm going to replace them and lower the Max at the same time.
Other then the new struts and the lowering springs is there anything else that needs to be replaced when lowering a Maxima? Its a 99 BTW.
Old 07-15-2007 | 07:54 PM
  #2  
99grnmaxgxe's Avatar
Senior Member
iTrader: (11)
 
Joined: Jun 2005
Posts: 5,716
From: Tucson, AZ
http://forums.maxima.org/showpost.ph...29&postcount=3
Look through those to see if they answer your question.
Old 07-15-2007 | 08:26 PM
  #3  
garyrr's Avatar
Senior Member
iTrader: (1)
 
Joined: Dec 2006
Posts: 227
if you want to drop your car anywhere below 2 inches and dont mind spending a bit more you should get coilovers

i have k sport coilovers and although they ride harsher( because im so low) they make my car look and handle so much better

total cost of them for me was 650 (cad)used and i installed them myself( they actualy make installation easier becaue you dont need to compress the spring to put them on the new strut. So all you need 2 do is remove 2/3 bolts, remove the old strut and put new strut in a bolt up
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CRizz
5th Generation Maxima (2000-2003)
41
06-07-2021 06:42 AM
TonyJr
3rd Generation Maxima (1989-1994)
4
08-20-2015 01:14 AM
cmpowell86
6th Generation Maxima (2004-2008)
1
08-10-2015 01:35 AM
laparka66
7th Generation Maxima (2009-2015)
16
08-06-2015 10:36 AM
BassAddictJ
7th Generation Maxima (2009-2015)
5
08-04-2015 12:38 PM




All times are GMT -7. The time now is 11:23 PM.