3rd Generation Maxima (1989-1994) Learn more about the 3rd Generation Maxima here.

radiator plastic tank cracked. Where do I get a new one?

Thread Tools
 
Search this Thread
 
Old Mar 2, 2008 | 01:06 PM
  #1  
truckinusa's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2007
Posts: 29
From: DFW
radiator plastic tank cracked. Where do I get a new one?

I'm looking online on http://www.discountradiator.com and found a new radiator for $89. Any better suggestions or recommendations. My next best quote from the local places was $155 at Autozone or Pepboys. Don't know if all radiators are made the same.
Old Mar 2, 2008 | 01:20 PM
  #2  
BenStoked's Avatar
Jesus was a Zombie.
iTrader: (7)
 
Joined: Aug 2007
Posts: 3,962
From: OKC, OK
are you referring to the overflow tank, or the radiator itself?
if its the tank, id recommend a junkyard unit.
Old Mar 2, 2008 | 01:42 PM
  #3  
maxitech's Avatar
Supporting Maxima.org Member
iTrader: (7)
 
Joined: Oct 2004
Posts: 3,306
From: Houston, TX
Either get one from the junkyard or if you don't have a junkyard with any Maximas nearby, then post a WTB in the f/s section.
Old Mar 2, 2008 | 01:55 PM
  #4  
Pearl93VE's Avatar
I can has?
iTrader: (14)
 
Joined: Jul 2006
Posts: 2,860
From: St. Augustine, FL
I actually took the chance in testing out an ebay one for $70. All fittings were exactly the same, the aluminum blades on the radiator seemed fine and sturdy. So far so good with it and my temp gauge is always just below midway at operating temp.

5k miles and going good.....
Old Mar 2, 2008 | 02:23 PM
  #5  
truckinusa's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2007
Posts: 29
From: DFW
Originally Posted by benstoked
are you referring to the overflow tank, or the radiator itself?
if its the tank, id recommend a junkyard unit.
oh no, not the overflow bottle. It is cracked along the top left side opposite to the top hose. It appears like it just fatigued. Its 20 years old almost.
Old Mar 2, 2008 | 02:39 PM
  #6  
internetautomar's Avatar
mod or sell?
iTrader: (30)
 
Joined: Sep 2003
Posts: 19,760
From: Skokie (look it up)
JBweld the tank.
Old Mar 2, 2008 | 04:27 PM
  #7  
subs1000w's Avatar
Supporting Maxima.org Member
 
Joined: Jan 2002
Posts: 3,371
i had the flare on the top pipe crunble and my hose poped off i got a junkyard one for like $30 but in the future id like to get an all aluminum one for likw 200 only problem is welding on the mounting nubs and fan brackets but it should last forever
Old Mar 2, 2008 | 08:32 PM
  #8  
truckinusa's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2007
Posts: 29
From: DFW
Originally Posted by subs1000w
i had the flare on the top pipe crunble and my hose poped off i got a junkyard one for like $30 but in the future id like to get an all aluminum one for likw 200 only problem is welding on the mounting nubs and fan brackets but it should last forever
Yeah I was kinda afraid something like that might happen to me later. I might get it repaired and sell it on here if its cheap enough? I ordered one off ebay for $70. Thought that was worth it. I'm hoping everything is correct to just do a r&r and be done.

I saw a Koyo brand one on ebay too. Don't know for sure but it looked all metal. Maybe that would have been the better way to go, but I was being cheap.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Miket2006
6th Generation Maxima (2004-2008)
4
Mar 1, 2021 03:55 AM
My Coffee
New Member Introductions
15
Jun 6, 2017 02:01 PM
doctorpullit
8th Generation Maxima (2016-)
25
Mar 29, 2016 11:08 AM
ef9
4th Generation Maxima (1995-1999)
10
Oct 4, 2015 08:43 AM
sliptap
7th Generation Maxima (2009-2015)
2
Sep 30, 2015 05:57 AM




All times are GMT -7. The time now is 03:32 AM.