For Matt93GXE
you mean this one?
<img src=http://24.1.29.190/blehm/pics/car_stereo/finished_door.jpg>
those are the stock grilles on the non-bose system.. they have a "cheesecloth" backing behind them, and it was getting torn up, so I pulled it out and left the speaker open.
on your bose stuff, I think you should be able to pull the metal grille off from the inside and it'll look just like that. I'm not positive, but take the door panel off and look at it.
I've got completely different pods down there now, replacing that whole bottom of the door panel.. I tok some pics, but don't have them scanned yet.. beigeMaxima also took some pics with his digicam and he said he'd email them to me sooner or later.. whenever I get them, I'll post a link.
<img src=http://24.1.29.190/blehm/pics/car_stereo/finished_door.jpg>
those are the stock grilles on the non-bose system.. they have a "cheesecloth" backing behind them, and it was getting torn up, so I pulled it out and left the speaker open.
on your bose stuff, I think you should be able to pull the metal grille off from the inside and it'll look just like that. I'm not positive, but take the door panel off and look at it.
I've got completely different pods down there now, replacing that whole bottom of the door panel.. I tok some pics, but don't have them scanned yet.. beigeMaxima also took some pics with his digicam and he said he'd email them to me sooner or later.. whenever I get them, I'll post a link.
I know.. I can't ever justify the cost of a digicam, cuz when I buy one, it's gonna be good..
but last week dad came home with a Mavica FD-85, so I'm not worried anymore..
now if it will stop raining and he'll let it out of his sight long enough for me to take some pics, I'll get pics of my door panels.
FYI, the door panels are fiberglass pods that replace the stock map pockets.. they're about 1/2 cu ft sealed enclosure..
I'm not done with them yet. (they're in, but I have LOTS of buzzes and rattles in the doors to fix).
but last week dad came home with a Mavica FD-85, so I'm not worried anymore..
now if it will stop raining and he'll let it out of his sight long enough for me to take some pics, I'll get pics of my door panels.

FYI, the door panels are fiberglass pods that replace the stock map pockets.. they're about 1/2 cu ft sealed enclosure..
I'm not done with them yet. (they're in, but I have LOTS of buzzes and rattles in the doors to fix).
Thread
Thread Starter
Forum
Replies
Last Post
Andrew91SE
Audio and Electronics
5
Jul 28, 2001 09:17 PM
Chris91SE
3rd Generation Maxima (1989-1994)
9
May 18, 2001 08:10 AM




