4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

My turn signals, burning fuses

Thread Tools
 
Search this Thread
 
Old Aug 10, 2009 | 06:45 PM
  #1  
manny097's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (1)
 
Joined: May 2006
Posts: 194
From: California
My turn signals, burning fuses

About a week ago going i notice that wen i put my left signal on it burn the fuse
wen put on right side it works, my hazards work, when setting the lock on my key fob they blink. so i bought a turn signal switch from a fellow member thinking that would solve the problem but wrong
Any advise on this? i hope its not a major electrical problem
Old Aug 10, 2009 | 07:02 PM
  #2  
pmohr's Avatar
No more Maximas...
iTrader: (26)
 
Joined: Jul 2005
Posts: 14,329
From: Oak Ridge, TN
Which fuse? 'Turn' or 'Hazard L'?

Hazards will flash all 4? If you unplug both of the left side bulbs, does it still pop the fuse? If not, then try them one at a time.

If so, then...

First thing I would check for is any damage to the connectors for both the hazard switch and the turn signal switch, also testing the switches themselves. Next would be continuity testing on the wiring harness, checking grounds, etc.

Really there's only a very small portion of wiring that bypasses the hazard switch when you use the turn signal switch, and it should pop the fuse when you use the hazards or locking/unlocking the car with the keyless entry remote.
Old Aug 11, 2009 | 08:03 PM
  #3  
97BlkMaximus's Avatar
Member
 
Joined: Aug 2009
Posts: 39
From: Minnesota
Ugh.
I will never be useful on this side with a Maxima god like pmohr around...
That means there's only one thing I can do...

Haha. But on the real, you MUST be a Nissan Tech huh?

Nice answer!

Old Aug 11, 2009 | 09:42 PM
  #4  
manny097's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (1)
 
Joined: May 2006
Posts: 194
From: California
Originally Posted by pmohr
Which fuse? 'Turn' or 'Hazard L'?

Hazards will flash all 4? If you unplug both of the left side bulbs, does it still pop the fuse? If not, then try them one at a time.

If so, then...

First thing I would check for is any damage to the connectors for both the hazard switch and the turn signal switch, also testing the switches themselves. Next would be continuity testing on the wiring harness, checking grounds, etc.

Really there's only a very small portion of wiring that bypasses the hazard switch when you use the turn signal switch, and it should pop the fuse when you use the hazards or locking/unlocking the car with the keyless entry remote.
Yeah it fix the problem i unplug both left bulbs didn't pop the fuse, check the sockets, they where good. The front bulb was the problem, even though it still work i guess it was old
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chernandez1278
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
1
Sep 16, 2015 01:18 PM
BrandonCause
4th Generation Maxima (1995-1999)
4
Sep 14, 2015 10:41 PM
LtLeary
7th Generation Maxima (2009-2015)
16
Sep 14, 2015 12:33 PM
minsbang
8th Generation Maxima (2016-)
1
Sep 11, 2015 08:48 PM




All times are GMT -7. The time now is 10:49 AM.