1/4 and 1/8 Mile Racing Talk about track times, launch techniques, strategies, etc. Check out the "Timeslips" subforum for posted times.No discussion of street racing will be tolerated.

12.92 @ 104mph w/ 1.69 60 foot - bolt on 3.5 swap - Video added

Thread Tools
 
Search this Thread
 
Old Oct 12, 2009 | 06:30 AM
  #1  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
12.92 @ 104mph w/ 1.69 60 foot - bolt on 3.5 swap - Video added

Finally got in to the 12s with my car NA yesterday. The atmospheric conditions were sick, though my traps left me a little disappointed I was hoping I'd see 105-106mph, not sure why this car isn't making as much power as I expect it to, maybe the 3.0 cams really are a limiting factor, but I was ripping it out of the hole anyways and managed to run a couple 12s as well as a bunch of 13.0s. Pulled the best 60's I've ever pulled, all 1.7s and a lone 1.6. My car was a big hit with people convinced I was spraying and searching for the nitrous line. May spray the car in the next two weeks here though since I have an NX kit sitting around, never installed nitrous though and it is a used kit so I need to make sure I have all the parts I need. grey or jime wanna help out with that


Anyways, my setup is

2002 VQ35 with 3.0L cams and 3.0L cam timing equipment and VIAS blockoff plate
Y-pipe
autozone cone filter on a stick
3.0L throttle body (this might be a bottleneck as well...?)
custom 3" from the flex section back
ACT HD PP and ClutchNet 6 puck sprung hub
TRE trans built by yours truly w/ Quaife LSD and PPG 3rd and 4th straight cut gears (TRE detailed, deburred and shot peened stock 1st, 2nd, 5th, TRE shot peened PPG 3rd/4th)
M&H 8.5x26x15 slicks at about 11.5psi on some random 15x7" wheels (borrowed, thanks maxmaxima91 aka Jeremy my turbo fab guy)
stock 3.0 ignition timing and mid to high 12s AFR (coarsely tuned, my laptop has been dead for a year so I cannot fine tune my emanage, so I just set the AFR to mid/high 12s using the little dials on the front of the emanage).
no weight reduction other than no AC (which is going back in this winter) and stuff like lighter wheels, coilovers, Fidanza flywheel, etc.

I was launching the car at 5500rpm slip-dump, then tried 6000' on my 1.69 60' run and it still held. Never did try higher than that. Probably should have tried redline just to see what it would do.

Weather was ridiculous yesterday, that's why I went to the track when only 1 other person could go with me. my buddy jason who has a really nice turbo 3rd gen. his brother took videos so hopefully I will have those soon.
Temp 43F, dewpoint 25F, pressure 30.33 made for a nice low DA of -600 feet LOL. It was actually even lower earlier in the day, but I got to the track later than I wanted. Oh well.

Something else weird, on my first 4 runs (including my 12.92) my car was breaking up between 5000and 5500rpm. I don't know what that's about. I've never experienced that before but I rarely floor this car on the street so who knows. Maybe old plugs or something, really not sure and I don't remember it happening on my last 2 runs.

My runs were, in order:

13.07 @ 103.2 1.78 60'
13.02 @ 103.2 1.76 60'
13.01 @ 103.2 1.73 60'
12.92 @ 104.0 1.69 60'
12.93 @ 104.0 1.73 60'
13.04 @ 103.5 1.73 60'


Here's the video of my best pass of the day.

http://www.youtube.com/watch?v=qAA7dwNsy-U






Last edited by Nealoc187; Oct 14, 2009 at 04:10 PM.
Old Oct 12, 2009 | 06:34 AM
  #2  
321VQ35MAX's Avatar
Senior Member
iTrader: (6)
 
Joined: Feb 2008
Posts: 10,436
From: Sanford, FL
Very nice. Is that what you hoped for? If car wasn't breaking up I could see maybe 12.6-12.7....
Old Oct 12, 2009 | 06:52 AM
  #3  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
I was hoping for 13.1s and 105+ traps so I far exceeded one thing I was hoping for but fell short of another. And no the breaking up was so brief it didn't affect things that much. I might have been able to squeak out a 12.8 but it was only 500rpm and it was pretty mild breakup, at first I thought I was imagining it but after 2 more runs I knew it was happening, however slight.
Old Oct 12, 2009 | 06:59 AM
  #4  
secondtonone317's Avatar
nycnissans
iTrader: (12)
 
Joined: Oct 2006
Posts: 1,595
From: Queens, NY
nice runs
good to see a few maxes in the 12s now
Old Oct 12, 2009 | 07:14 AM
  #5  
accordingtou's Avatar
VQ30 DE T
iTrader: (41)
 
Joined: Jan 2005
Posts: 2,162
From: Philadelphia
Very nice times. You can definately drive
Any plans for EU? or a device to control timing & rev limiter?
Old Oct 12, 2009 | 07:22 AM
  #6  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
No, turboing again this winter and hopefully prototyping Bikisoft ECU if it ever makes it through customs. Customs has sent it back to Australia twice now...
Old Oct 12, 2009 | 07:25 AM
  #7  
mist max2000's Avatar
Senior Member
iTrader: (16)
 
Joined: May 2006
Posts: 2,071
this is awsome... are you totally stripped down in terms of weight?
Old Oct 12, 2009 | 07:43 AM
  #8  
scmax2000's Avatar
Senior Member
iTrader: (16)
 
Joined: Jan 2007
Posts: 310
From: Waterford, Michigan
Very very Nice #'s, NA w/ bolt on 3.5 WOW. Congratulation, very impressive.
Old Oct 12, 2009 | 07:47 AM
  #9  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
Originally Posted by mist max2000
this is awsome... are you totally stripped down in terms of weight?
Nothing at all is removed from this car except the air conditioning which is a total of about 40lbs (which is going back in this winter). Full power leather interior, sunroof, etc. Any other weight reduction is a result of mods like lighter wheels, coilovers, lightened flywheel, etc.

Last edited by Nealoc187; Oct 12, 2009 at 07:50 AM.
Old Oct 12, 2009 | 08:06 AM
  #10  
ajcool2's Avatar
Senior Member
iTrader: (43)
 
Joined: May 2004
Posts: 10,550
From: Baltimore, Md
Congrats Neal. Your always breaking out the big track times.
Old Oct 12, 2009 | 08:08 AM
  #11  
tookrzy4u192's Avatar
iTrader: (19)
 
Joined: Nov 2008
Posts: 7
From: Oklahoma City
nice times.. in for the video
Old Oct 12, 2009 | 08:34 AM
  #12  
Kevlo911's Avatar
Kevlo for President
iTrader: (36)
 
Joined: Dec 2000
Posts: 35,755
From: Lake Orion, MI
Any vids of you launchin at those RPMs? I would love to see it.
Old Oct 12, 2009 | 08:43 AM
  #13  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
yeah I always launch on slicks at 5500ish so my turbo vids on youtube are me launching like that, but the 60's weren't nearly as good (the two vids I have on youtube are a 1.92 and 1.82 60').

my buddy took videos yesterday so hopefully he will send them to me and I can post them up. I want to see what they look like too.
Old Oct 12, 2009 | 09:42 AM
  #14  
Juiced SE-R's Avatar
Senior Member
 
Joined: Mar 2008
Posts: 763
From: Oklahoma City, OK
Congrats Neal that's awesome!!
Old Oct 12, 2009 | 09:44 AM
  #15  
streetzlegend's Avatar
Senior Member
iTrader: (8)
 
Joined: Dec 2003
Posts: 4,097
Man thats awesome, must feel nice hitting those 60'.

As for the nitrous, me being a user for some of years (not as long as harol and jim but still know a lil). I strongly suggest you send both nitrous and fuel solenoids to NX to get checked and if needed they will rebuild/recondition them, it is free (lifetime warrranty ftw) and they dont ask for proof or purchase or anything. NX is my favorite kit, but even the best solenoids need to be checked, i had a nitrous one leak as soon as you opened the bottle.
Old Oct 12, 2009 | 12:02 PM
  #16  
VQphantom's Avatar
Banned
iTrader: (10)
 
Joined: Dec 2007
Posts: 768
From: baltimore
FTW!!! CONGRATS
Old Oct 12, 2009 | 12:17 PM
  #17  
1swtmax's Avatar
Senior Member
 
Joined: Nov 2005
Posts: 459
From: Carlisle, PA
Nice freeken 60' time. I`m waiting on the vids also. I`m curious on what rpm your lanching at and how much wheel spin. Nice numbers man.
Old Oct 12, 2009 | 01:24 PM
  #18  
maxboy325's Avatar
Senior Member
iTrader: (35)
 
Joined: Jul 2007
Posts: 2,129
From: Maryland
I would love to see your numbers with a mild cam setup (JWT knock off) Good job and fast car.

for 3.0 cams
Old Oct 12, 2009 | 01:51 PM
  #19  
1sik4dsc's Avatar
Senior Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 1,204
From: NY
those are some nice 60 foot times, congrats .......any vids?
Old Oct 12, 2009 | 03:15 PM
  #20  
96sleeper's Avatar
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Nov 2000
Posts: 1,756
From: Chattanooga, TN
Sweet 60 ft times Neal. For some reason my car launched alot better when it was n/a. I think I hit a 1.76 when I was n/a, but only 1.8x boosted. I may try to go to the track in a few weeks and see what it will do again. I haven't used the slicks in year or so, they may be no good now.
Old Oct 12, 2009 | 04:03 PM
  #21  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
try em out you may be pleasantly surprised. my buddy who I borrowed these from said they haven't been used since he bought them in 2007 he doesn't think he used them at all last year and he definitely hasn't been to the track this year on them and they sure worked well still. you are running more power now than you were when you ran 11.6 right? go bust some 11.4s!

Last edited by Nealoc187; Oct 12, 2009 at 04:06 PM.
Old Oct 12, 2009 | 05:52 PM
  #22  
one_fast_max's Avatar
Senior Member
iTrader: (4)
 
Joined: Sep 2007
Posts: 535
From: Canton, MS
great job Neal! amazing times! get those other cams and easy mid 12's
Old Oct 12, 2009 | 06:14 PM
  #23  
My-Body-Is-Ready's Avatar
Senior Member
iTrader: (4)
 
Joined: Feb 2006
Posts: 589
damn 1.6 60ft. teach me!
Old Oct 12, 2009 | 06:34 PM
  #24  
mist max2000's Avatar
Senior Member
iTrader: (16)
 
Joined: May 2006
Posts: 2,071
Originally Posted by Look-at-my-MAX
damn 1.6 60ft. teach me!
lol slicks and slipping the clutch @ 5500 ...

.. also.. a good driver :
Old Oct 12, 2009 | 08:38 PM
  #25  
My-Body-Is-Ready's Avatar
Senior Member
iTrader: (4)
 
Joined: Feb 2006
Posts: 589
my 60 ft time is 2.2 with MT street radials. im a autotragic power brake launching at like 1.8k rpms. =(
Old Oct 13, 2009 | 06:15 AM
  #26  
datdude20's Avatar
Senior Member
iTrader: (17)
 
Joined: Jan 2007
Posts: 2,027
From: zimbabwe
D@mn!!!!! them 60ft's are crazy......congrtaz man


but some 3.5 cams should help u reach ur goal
Old Oct 13, 2009 | 06:25 AM
  #27  
321VQ35MAX's Avatar
Senior Member
iTrader: (6)
 
Joined: Feb 2008
Posts: 10,436
From: Sanford, FL
Damn, all these 12 second Maxima's... I feel like I drive a damn tank
Old Oct 13, 2009 | 06:36 AM
  #28  
i2vicious2's Avatar
SCAMMER DO NOT BUY FROM FOR NOW
iTrader: (5)
 
Joined: Apr 2008
Posts: 657
From: Maryland
the 60' s are crazy!!!

Last edited by i2vicious2; Oct 13, 2009 at 06:46 AM.
Old Oct 13, 2009 | 06:53 AM
  #29  
tuko316's Avatar
Member
 
Joined: Oct 2008
Posts: 177
Sick times. Your 60 foots are great.
Old Oct 13, 2009 | 07:04 AM
  #30  
perkman87's Avatar
Senior Member
iTrader: (6)
 
Joined: Oct 2007
Posts: 737
From: West Palm Beach
Good Job mang.
Old Oct 13, 2009 | 08:02 AM
  #31  
DandyMax's Avatar
3.5 in the works
iTrader: (7)
 
Joined: Jun 2004
Posts: 2,477
From: Ontario, Canada
Nice 60 ft!

Hmm.. if I can do 1.73 with a torqueless 3L this gives me hope of getting into the 1.6's with the 3.5L...
Old Oct 13, 2009 | 08:17 AM
  #32  
khantalha+'s Avatar
Senior Member
iTrader: (15)
 
Joined: Dec 2005
Posts: 6,601
From: Akron, Ohio
Very nice Neal.. .. always something exciting...
Old Oct 13, 2009 | 10:55 PM
  #33  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
Here's the vid.


http://www.youtube.com/watch?v=qAA7dwNsy-U

Last edited by Nealoc187; Oct 14, 2009 at 04:11 PM.
Old Oct 14, 2009 | 12:21 AM
  #34  
PulsarGTS's Avatar
Senior Member
iTrader: (6)
 
Joined: Nov 2007
Posts: 1,400
From: Cininnati, OH
HOLY **** @ that launch.
Old Oct 14, 2009 | 01:15 AM
  #35  
MIK3's Avatar
Senior Member
iTrader: (12)
 
Joined: Oct 2007
Posts: 1,106
From: California
Originally Posted by secondtonone317
nice runs
good to see a few NA maxes in the 12s now

Can't forget those minor details

Can't wait to join this 12.9 N/A club! And man was it good to see you jump out an entire car length on that Camaro! Beautiful...
Old Oct 14, 2009 | 06:00 AM
  #36  
321VQ35MAX's Avatar
Senior Member
iTrader: (6)
 
Joined: Feb 2008
Posts: 10,436
From: Sanford, FL
Any idea who that 3rd Gen Maxima was after you?
Old Oct 14, 2009 | 06:43 AM
  #37  
grey99max's Avatar
LandShark has Cosworth
iTrader: (12)
 
Joined: Jan 2004
Posts: 4,327
From: Topeka, KS
Originally Posted by DandyMax
Nice 60 ft!

Hmm.. if I can do 1.73 with a torqueless 3L this gives me hope of getting into the 1.6's with the 3.5L...
More like some 1.5s - you had insane launches!
Old Oct 14, 2009 | 06:59 AM
  #38  
grey99max's Avatar
LandShark has Cosworth
iTrader: (12)
 
Joined: Jan 2004
Posts: 4,327
From: Topeka, KS
Originally Posted by Nealoc187
Finally got in to the 12s with my car NA yesterday. The atmospheric conditions were sick, though my traps left me a little disappointed I was hoping I'd see 105-106mph, not sure why this car isn't making as much power as I expect it to, maybe the 3.0 cams really are a limiting factor, but I was ripping it out of the hole anyways and managed to run a couple 12s as well as a bunch of 13.0s. Pulled the best 60's I've ever pulled, all 1.7s and a lone 1.6. My car was a big hit with people convinced I was spraying and searching for the nitrous line. May spray the car in the next two weeks here though since I have an NX kit sitting around, never installed nitrous though and it is a used kit so I need to make sure I have all the parts I need. grey or jime wanna help out with that
Nice to see that you haven't lost your touch at the starting line! I'm sure the great DA helped some, but geeze that's quick for a hybrid 3.0/3.5 - or any other N/A Maxima.

Nitrous, huh? I'd be glad to help you go to the dark side, even if just for this fall. Spraying on your launch would be - interesting...

Great times from that day, and the 60-ft times remind me of my last 1.7s on Oct. 1st. I had a decent DA that day as well. Maybe a MT is good for something after all!
Old Oct 14, 2009 | 01:11 PM
  #39  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
Originally Posted by 321VQ35MAX
Any idea who that 3rd Gen Maxima was after you?


Yes that is my buddy Jason's turbo 3rd gen. His brother was taping.
Old Oct 14, 2009 | 02:31 PM
  #40  
Grand_hustle17's Avatar
Senior Member
iTrader: (22)
 
Joined: Dec 2006
Posts: 7,825
man that was ultimate



All times are GMT -7. The time now is 07:40 AM.