5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Car shaking after tuneup HELP

Thread Tools
 
Search this Thread
 
Old Dec 24, 2009 | 12:06 PM
  #1  
DoNcHoYaX1's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2004
Posts: 379
From: Chicago
Car shaking after tuneup HELP

I have a 2000 maxima gle with 167k miles. The car is in mechanically good shape. No real problems since I bought it 4yrs with 100k miles. I decided to do a tuneup but now the car is shaky when in gear and when its just driving off. It Idles fine I cant seem to understand what it is. I know I have to replace the O2 sensors but that shouldnt have to do with the car shaking. I replaced all parts with oem nissan parts.
Old Dec 24, 2009 | 12:38 PM
  #2  
Unklejoe's Avatar
Senior Member
iTrader: (6)
 
Joined: Aug 2008
Posts: 1,147
From: Gloucester County NJ
Exactly what parts were replaced during the tune up?
Old Dec 24, 2009 | 01:03 PM
  #3  
VQP0WER's Avatar
Senior Member
 
Joined: May 2008
Posts: 1,767
From: Moore, OK
I take it he replaced the plugs, and in the process, prolly didn't seat a coil good enough.

Also, whats with all the advertising spam links in your sig?
Old Dec 24, 2009 | 01:12 PM
  #4  
DoNcHoYaX1's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2004
Posts: 379
From: Chicago
I replaced the sparkplugs pcv valve, filters
Old Dec 24, 2009 | 03:41 PM
  #5  
Unklejoe's Avatar
Senior Member
iTrader: (6)
 
Joined: Aug 2008
Posts: 1,147
From: Gloucester County NJ
+1 VQPOWER
Old Dec 24, 2009 | 04:50 PM
  #6  
Skorp1on's Avatar
Junior Member
 
Joined: Oct 2006
Posts: 75
look for un-plugped vacuum lines, in case u had to take any off. In addition to shaking, ECU could throw a code. g'luck
Old Dec 24, 2009 | 05:56 PM
  #7  
67whitegoat's Avatar
Senior Member
iTrader: (4)
 
Joined: May 2004
Posts: 639
From: Florida, Go Gators!
Did you check the gap on all 6 plugs before installing them? Sounds like a misfire you didn't have prior to working on it. First step...Double check your work.
Old Dec 24, 2009 | 06:13 PM
  #8  
asma123's Avatar
Senior Member
iTrader: (2)
 
Joined: Jul 2009
Posts: 174
From: Surrey, bc
when in gear and you're idleing whats the rpm at?
Old Dec 24, 2009 | 06:39 PM
  #9  
maxfever1987's Avatar
Senior Member
iTrader: (93)
 
Joined: Feb 2008
Posts: 4,861
From: QUEENS/NYC
i think you the have an undetected misfire, soon your ecu should throw a code for it, but check the harness clips for each coil and also make sure they coils are on nice and snug.
Old Dec 24, 2009 | 07:00 PM
  #10  
DoNcHoYaX1's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2004
Posts: 379
From: Chicago
ok I will check the coil packs to see if they are all pressed down. Thanks
Old Dec 26, 2009 | 09:11 AM
  #11  
dklanecky1's Avatar
Newbie - Just Registered
 
Joined: Mar 2004
Posts: 1
Had a similar issue with my 2K and found I messed up a coil pak when I removed it. They get somewhat fragile after 100k miles.
Old Dec 26, 2009 | 11:43 PM
  #12  
foodmanry's Avatar
Da Roller Coaster!
iTrader: (15)
 
Joined: Jan 2002
Posts: 3,913
From: Los Angeles, CA
Check for spark plug gap...coils properly seated and connected properly...vacuum hoses properly connected and no leaks.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MikesChevelle
Audio and Electronics
5
Nov 23, 2024 11:17 AM
Lakersallday24
6th Generation Maxima (2004-2008)
10
Jun 16, 2019 01:35 AM
kjlouis
4th Generation Maxima (1995-1999)
11
Nov 24, 2018 06:09 AM
jhontelj
5th Generation Maxima (2000-2003)
2
Aug 17, 2015 04:07 AM
Balkins
5th Generation Maxima (2000-2003)
1
Aug 12, 2015 06:39 AM




All times are GMT -7. The time now is 07:17 AM.