The new tires helped a ton! Going from street tires to the ET streets took off 7 tenths off my ET. MPH increased a little bit too, this wheel/tire combo is sooooo much lighter than the stock 18s.

Mods are:
fujita intake
3" single exhaust from the manifolds back
NWP block off plate
NWP phenolic spacers
26x11.5-16 Mickey thompson ET streets (took a decent amount of grinding to fit the 16" wheels)

Take into account this is on the STOCK exhaust manifolds and precats. Also the car is not tuned with anything.

I was launching around 5000rpm with 15 psi in the tires for the first two passes. Then I lowered the tire pressure to 12psi and launched right at redline. (6500rpm)
This got me a 1.8 60'.
I never completely dumped the clutch. I did a really fast slip to avoid breaking any parts.

DA was right around 1800DA +/- 50DA

Here are the timeslips

60 FT_____2.0019
330 FT____5.6189
1/8 ET____8.6591
1/8 MPH___82.36
1000 ET___11.2737
1000 MPH__93.28
1/4 ET____13.4990
1/4 MPH___101.42



60 FT_____1.9517
330 FT____5.5952
1/8 ET____8.6359
1/8 MPH___82.22
1000 ET___11.2580
1000 MPH__91.59
1/4 ET____13.4910
1/4 MPH___100.92



60 FT_____1.8578
330 FT____5.4827
1/8 ET____8.5098
1/8 MPH___81.07
1000 ET___11.1407
1000 MPH__92.86
1/4 ET____13.3744
1/4 MPH___100.25



Here is a pic of the car and a pic of the wheel/tire setup. All pictures are taken with my extremely sophisticated $80 kodak





Let me know what you guys think!

 

That's amazing!! Good job! When are you getting headers? (are there any 12 sec N/A 6th gens?)

 

Thanks man! I'm never gonna get headers. They are too expensive. lol

There are no 12 sec N/A 6th gens. I might even be the fastest N/A 6th gen now.

 

Man you'd def. Have the fastest NA 6th gen If you got headers.. But regardless 13.3 is pretty quick

 

Thanks again!

 

Get the ebay headers.... still better than stock......... excellent times yo... you should definately go for records mang, this is the fastest N/A 6th gen times I kno of too

 

Awesome! Nice 60ft! 12's are just around the corner...

Makes me want to hit the track again. lol

 

awesome

get ebay headers and u 'll be at high 12,S


i have in my car
ebay headers
Custom 2.75" Exhaust System
Injen CAI
NWP VIAS Plate
UR Pulley
nismo thermostat
Eibach Pro Kit
Osiris Tune By PMD Julan Hamed
Tire : 245/50/16 Nitto

and i do




i wanna ask do u have hlsd?

 

im not too familiar w the new gens like others, but wow, very impressive , almost want a pic of the trunk to make sure theres no bottle back there lol jk (;

thats quick +1 on the lsd question... im considering getting one but if you can pull 60 fts like yours without it it may not be worth it

 

Congrats... You like 1/4 mile better than 1/8 now?

 

Congrats, great times

 

Thanks man!
I'm thinking about the ebay headers. We'll see.
Thanks man!
If I had a little more power the car would definitely go 12s.

You have to get to the track. I love watching your car run!

I actually don't know lol. The car spins both tires, although I am pretty sure I don't have an HLSD. Are there any chassis codes that tell you if you have one?
Thanks again!
Everyone at the track that comes up to ask me about the car asks how much I am spraying.
Thanks!
I run the 1/4 mile because it is pretty close to me now. Before, I only had an 1/8 that was close. I like both because I love racing!
Thanks man!
Appreciate all the help you've given me.

 

holy shooottt 13.3 wow thats amazing, great numbers there!

 

Thanks man! I appreciate it!

If I could run at a track that had some better DA, I could get some more out of it.

 

Awesome work man. If not ebay headers at least get 3.0 headers, they have no cats.

 

Wow 13.3, very impressive. Please get headers, I wanna see this car breaking into the 12's.

 

Thanks!
I don't think 3.0 headers fit in the 6th gen chassis. I am pretty sure they interfere with the subframe or something like that.
Thanks again!
I just don't have enough money for headers. I know the headers are cheap, but then I would want to tune it at that point as well. An uprev tune would cost me another $550.

Anyone wanna donate some money to the 12 second n/a 6th gen fund?

 

Racingline HFPCs?

 

Stock pre cats. I would never spend $539.00 on those. lol

 

hey do you have a pic of your exhaust from the back of the car?you only have one muffler?congrats on the time

 

Doesn't look the greatest, but it makes power and saves weight.

 

6th gen headers are different than 4th gen headers. the engine cradle is totally different.

I have some 6th gen headers if you're interested (really cheap). i bought them for my 4th gen, before i realized that the 6th gen engine cradle was totally different than the 4th gen crossmember setup and they've just been sitting in a box in the garage for like a year and a half now.

 

6th gen headers are different than 4th gen headers. the engine cradle is totally different.

I have some 6th gen headers if you're interested (really cheap). i bought them for my 4th gen, before i realized that the 6th gen engine cradle was totally different than the 4th gen crossmember setup and they've just been sitting in a box in the garage for like a year and a half now.

 

PM sent

 

There is a guy on 350z that started a project and ran out of money and the people on the site started sending him money to finish.

I have ever though about getting sponsered, should be really easy out there.

If you were closer I could make you some test pipes to replace the cats

 

I don't think anyone would sponsor my car. I also don't know if I would want that responsibility either. Would be kind of cool though.

Those test pipes would help for sure. I'm decently far away though. lol

 

Good times yo. And to think I had discounted 6thgens to be slow. Me like!

Let this be a lesson to folks. Tires mean everything. Dont know how people think they can buy all the mods in the world, then run on some stock street tires. ANd wonder why they are slow.

 

Or go on their 20 inch chromies and ask whats wrong with their car.

 

Congrats Krazy. Very Impressive.

 

That's because all the 6th gen guys have the retarded 5 speed auto, huuuuge wheels, and all the LED lights they can buy.

Tires definitely mean everything!

Thanks man!

 

I may have missed it but what muffler are you using?

 

Here is a link to the one I have:
http://www.summitracing.com/parts/MPE-12198/

 

Very nice times, especially for the trap! I still need to get my a$$ back to the track.

 

i know rite. except for maybe rip kevin007. he had a fast svt and 5spd.

I could tell you didnt have many mods from your trap speed. proofs in the puddin your 60ft gave you all needed. i could use you on a couple of street wars in mexico.lol

 

Thanks!
Kevin's car moved pretty well.

In California I used to race on the street all the time. Every Friday and Saturday. I just moved to Kansas and there is definitely less of a scene out here.

 

Hey! Welcome to Kansas.... You're near a drag strip in Wichita and Topeka, and then KCIR in Kansas City. ( and me )

 

Thanks!
These times were run at Kansas International Dragstrip (KID). I'm about 50 miles from this track. So it's not a bad drive.

I don't think I'll travel up to topeka or kansas city, unless there is a big event or something. KID seems pretty good to me. They also didn't make me wear a helmet.

 

That's a decent track - they have new owners and have fixed it up a bit. Wichita has a pretty good import presence.... watch out for the sand burrs, though. Topeka, KC and Tulsa have hosted PINKS events - very cool to watch. I've been to three. I got to see Rich crash his bike at Heartland Park. Wow... The 2010 Topeka Pinks All-Out show will be broadcast on Oct.28th on the Speed channel, if you're curious.

KCIR has three to four track events per week - Wed. and Friday night "test-n-tune" but Friday is more like Street Wars.

http://www.kcironline.com/

Luck with your car. Edit: just read your strips - seriously good 60' times! And that exhaust is good work. From your photo, it looks like you were parked north of the concession stand. Can you believe they widened the return road?

 

Seems like KID hooks pretty good. My car doesn't make much power though. lol

I would like to go to a pinks all out event, that would be cool.

Sounds like KCIR is the place to be. Are they strict on helmets, because I don't have one? lol

Thanks man. I was pretty excited with a 1.8 60'

My exhaust guy did a good job on it. There are no crush bends in it.

The return road seems normal to me now. I guess it must have been just enough to fit one car before. lol

 

Yup, KCIR insists on helmets - every track can decide that for themselves, except for sanctioned events, I believe. They did rent them - dunno about this season - which is about over.....