1/4 and 1/8 Mile Racing Talk about track times, launch techniques, strategies, etc. Check out the "Timeslips" subforum for posted times.No discussion of street racing will be tolerated.

Blew my Motah at the track saturday

Thread Tools
 
Search this Thread
 
Old Nov 21, 2011 | 02:46 PM
  #1  
ajcool2's Avatar
Thread Starter
Senior Member
iTrader: (43)
 
Joined: May 2004
Posts: 10,550
From: Baltimore, Md
Blew my Motah at the track saturday

Yup that right I made one small mistake and I blew my engine. Which car you ask? My %*&^ 350Z FTMFL. So my plan was to go to the track throw on the slicks and finally get some 11 second passes under my belt but obviously that didnt happen. I made 2 passes N/A on street tires just get a feel for the track as I always do and ran 13.3@104. There was a slight headwind which explains my low trap speed. After those runs I decided to go for the fastest street tire time on my350z which is 12.345. I ran 12.349 on my 19's a few weeks ago and today I was on my stock rims and tires so it should have been easy to do. So usually before I run my nitrous I stop in the pitts, open the bottle, purge it and switch to my nitrous map but my bottle was already open and the system was already purged so I went straight back to the lanes. I launched the car and hit the nitrous around 3500 rpm and the car wheel hopped like hell. I shift into second and everything is fine but when I went into 3rd I felt a huge drop in power but it kicked back in for a second. Then it died out again this time the check engine light flashed and I hear a huge backfire and theres a trail of white smoke behind me. I quickly let out closed the bottle, purge the lines and shut the car off. I check under the car and its not leaking, check the oil theres no coolant and check under the hood everything looks normal. I get in the car and try to start it and the engine barely turned. Then it hit me I SPRAYED ON MY N/A TUNE SMH. My tuner told me over and over again to make sure not to do it. So yeah I failed. The engine is done and I'm in the process of pulling it now. I did end up running a 12.4@107 while blowing my motor lol.

R/T: .504
60': 1.861
330: 5.145
1/8: 7.934
1000: 10.403
1/4: 12.496
MPH: 107.15

http://www.youtube.com/watch?v=soBz8H1ZBLE

Last edited by ajcool2; Nov 21, 2011 at 02:52 PM.
Old Nov 21, 2011 | 03:08 PM
  #2  
niceguy's Avatar
Supporting Maxima.org Member
 
Joined: Dec 2003
Posts: 678
From: Memphis, TN
Ouch, sorry to hear that! What are your plans?? Another stock engine or high compression perhaps?
Old Nov 21, 2011 | 03:09 PM
  #3  
321VQ35MAX's Avatar
Senior Member
iTrader: (6)
 
Joined: Feb 2008
Posts: 10,436
From: Sanford, FL
Saw that on Facebook, what are the plans??
Old Nov 21, 2011 | 03:14 PM
  #4  
ajcool2's Avatar
Thread Starter
Senior Member
iTrader: (43)
 
Joined: May 2004
Posts: 10,550
From: Baltimore, Md
Originally Posted by niceguy
Ouch, sorry to hear that! What are your plans?? Another stock engine or high compression perhaps?
Stock engine. Saturday was supposed to be the last time it saw the track. Once I got that 11 second slip I was going to part it out and sell the car. Since that didnt happen I have 2 weeks before tracks close to get it running and try one more time. My GF is making me try again so she doesnt have to hear me talk about how close I was to 11's anymore lol.
Old Nov 21, 2011 | 03:16 PM
  #5  
ChrisMan287's Avatar
Got Retrofit?
iTrader: (34)
 
Joined: Jul 2008
Posts: 14,761
From: NY
Damn man, way to **** the bed on that one lol I just saw the car the weekend before

Why are you gonna part out and sell?
Old Nov 21, 2011 | 03:23 PM
  #6  
ajcool2's Avatar
Thread Starter
Senior Member
iTrader: (43)
 
Joined: May 2004
Posts: 10,550
From: Baltimore, Md
Originally Posted by ChrisMan287
Damn man, way to **** the bed on that one lol I just saw the car the weekend before

Why are you gonna part out and sell?
Its just time to move on. Theres not much else I want to do with it. I dont have plans for turbo, S/C or any kind of big build. Not to mention I've been neglecting my max lol. Plus I could always get a 370z later down the line.
Old Nov 21, 2011 | 07:55 PM
  #7  
ChrisMan287's Avatar
Got Retrofit?
iTrader: (34)
 
Joined: Jul 2008
Posts: 14,761
From: NY
Originally Posted by ajcool2
Its just time to move on. Theres not much else I want to do with it. I dont have plans for turbo, S/C or any kind of big build. Not to mention I've been neglecting my max lol. Plus I could always get a 370z later down the line.
You really gotta put the 4th gen back together lol
Old Nov 21, 2011 | 09:43 PM
  #8  
maxboy325's Avatar
Senior Member
iTrader: (35)
 
Joined: Jul 2007
Posts: 2,129
From: Maryland
Yeah it was a bad day all around. After that happend I refused to swap to my slicks in fear of needing two tow trucks. I thought blowing my clutch line the night before was bad. That in it's self was bad but blowing a tire on the highway going to the track I should not have run my car. My cell phone died my laptod died. My tune was jacked up. I am sure you would trade all of that for your motor
Old Nov 22, 2011 | 10:04 AM
  #9  
taz394's Avatar
Senior Member
iTrader: (2)
 
Joined: Jan 2010
Posts: 638
From: Houston,TX
naws is like a dirty skank ... you have to make sure you've protected yourself good before doing anything lol
Old Nov 24, 2011 | 10:10 AM
  #10  
t6378tp's Avatar
Turbo 3.5
iTrader: (69)
 
Joined: Dec 2005
Posts: 7,785
From: Philly
Any updates
Old Nov 24, 2011 | 02:50 PM
  #11  
Rods03Max619's Avatar
Senior Member
iTrader: (5)
 
Joined: Oct 2009
Posts: 8,946
From: Diego,California
DAMN that sucks, good luck on the new motor and your 11s....
Old Nov 24, 2011 | 06:31 PM
  #12  
Jime's Avatar
Banned
iTrader: (10)
 
Joined: Jan 2002
Posts: 4,919
From: https://t.me/pump_upp
I feel for you. Been there, done that etc.

Just step back take a breath and consider your options.

Don't make any hasty decisions.

Jim

FWIW I am planning on doing up a G35 coupe next year.

Last edited by Jime; Nov 24, 2011 at 06:34 PM.
Old Nov 24, 2011 | 07:41 PM
  #13  
streetzlegend's Avatar
Senior Member
iTrader: (8)
 
Joined: Dec 2003
Posts: 4,097
Sorry to hear, that sound has haunted me for ever(Since my 3.5 threw a rod)!!! Everytime I hear something even close to it I panic and turn off radio, slow down, etc.. lol.

Goodluck bro
Old Nov 30, 2011 | 05:23 PM
  #14  
stockmax914's Avatar
Junior Member
iTrader: (1)
 
Joined: Dec 2010
Posts: 30
sorry to hear that but thats some gud number
Old Jan 5, 2012 | 10:36 AM
  #15  
SmokinMax02's Avatar
Member
 
Joined: Nov 2007
Posts: 283
From: Cincinnati, Ohio
Ouch.
Old Jan 5, 2012 | 11:00 AM
  #16  
95maxrider's Avatar
Lightly modded
iTrader: (32)
 
Joined: Nov 2001
Posts: 7,742
From: Herndon, VA
Damn AJ, that's rough. Just another reason why I don't regret taking the nitrous out of my car. So what's in store for the Max?
Old Jan 6, 2012 | 02:43 PM
  #17  
ajcool2's Avatar
Thread Starter
Senior Member
iTrader: (43)
 
Joined: May 2004
Posts: 10,550
From: Baltimore, Md
Originally Posted by t6378tp
Any updates
Rounded the last transmission bolt before the engine could come out so the car is at the shop. It should be done in 2 days. I got a free set of headers and a new exhaust that Im throwing on it and I'm thinking of dynoing the car once its running to make sure the motor is healthy.
Old Jan 6, 2012 | 02:44 PM
  #18  
ajcool2's Avatar
Thread Starter
Senior Member
iTrader: (43)
 
Joined: May 2004
Posts: 10,550
From: Baltimore, Md
Originally Posted by Rods03Max619
DAMN that sucks, good luck on the new motor and your 11s....
Thanks.
Old Jan 6, 2012 | 02:48 PM
  #19  
ajcool2's Avatar
Thread Starter
Senior Member
iTrader: (43)
 
Joined: May 2004
Posts: 10,550
From: Baltimore, Md
Originally Posted by Jime
I feel for you. Been there, done that etc.

Just step back take a breath and consider your options.

Don't make any hasty decisions.

Jim

FWIW I am planning on doing up a G35 coupe next year.
Yeah so Im going to keep the car since it will be paid off this month. Ill just be more carefull in the future.

Nice you should do a VQ37 swap with it then spray it. The 370's are running 12.2's - 12.4's with bolt-ons and a tune. You're not getting rid of the max are you?
Old Jan 6, 2012 | 02:53 PM
  #20  
ajcool2's Avatar
Thread Starter
Senior Member
iTrader: (43)
 
Joined: May 2004
Posts: 10,550
From: Baltimore, Md
Originally Posted by 95maxrider
Damn AJ, that's rough. Just another reason why I don't regret taking the nitrous out of my car. So what's in store for the Max?
Yup that motor was good to me. At one time I was spraying a 100 shot on a mild N/A tune and it didnt skip a beat. Then I blew it up smh. The max is in storage and has been neglected due to my GF's max and my brothers max. I75% done my full swap on it just have to wire in the guage cluster, install the dash harness connectors and put the tranny in. That will be after the cams are in my fiance's 3.5 and tuned.
Old Jan 6, 2012 | 06:58 PM
  #21  
t6378tp's Avatar
Turbo 3.5
iTrader: (69)
 
Joined: Dec 2005
Posts: 7,785
From: Philly
Great time to do cams
Old Jan 9, 2012 | 05:12 AM
  #22  
mrjasonlyrics's Avatar
Senior Member
 
Joined: Oct 2011
Posts: 1,245
Damn bro that sucks. Nice pass though but it sucks that I had to cost you an engine. I'm now getting into the drag racing with my 6thgen max and I'm scared to do any major mods.

I mean it comes with the territory that when you increase hp you have to either go through a tranny,engine,driveshaft,ECU etc. I just want to do 14's flat or late 13's and I'll be good
Old Jan 9, 2012 | 05:13 AM
  #23  
mrjasonlyrics's Avatar
Senior Member
 
Joined: Oct 2011
Posts: 1,245
Damn bro that sucks. Nice pass though but it sucks that I had to cost you an engine. I'm now getting into the drag racing with my 6thgen max and I'm scared to do any major mods.

I mean it comes with the territory that when you increase hp you have to either go through a tranny,engine,driveshaft,ECU etc. I just want to do 14's flat or late 13's and I'll be good
Old Jan 9, 2012 | 02:39 PM
  #24  
ajcool2's Avatar
Thread Starter
Senior Member
iTrader: (43)
 
Joined: May 2004
Posts: 10,550
From: Baltimore, Md
Originally Posted by t6378tp
Great time to do cams
Cant drop $1000 on cams now that I will be paying for a wedding.
Old Jan 13, 2012 | 02:39 PM
  #25  
ajcool2's Avatar
Thread Starter
Senior Member
iTrader: (43)
 
Joined: May 2004
Posts: 10,550
From: Baltimore, Md
The car is now up and running again. I'm going to log my a/f tonight to make sure everything is good. I'll proobably dyno in a few weeks to make sure this motor is healthy.
Old Jan 16, 2012 | 02:25 PM
  #26  
jkpgt96's Avatar
Senior Member
 
Joined: Jan 2008
Posts: 585
From: Ballwin, MO
Good luck! I know the feeling though. I spun a bearing 12k miles after my motor got built in my Probe. I plan to make another pass at getting into the 13's in my car and then I can retire it from track duty. (the track local to me is re-opening)
Old Feb 6, 2012 | 04:33 AM
  #27  
Ryan00ss's Avatar
Junior Member
 
Joined: Jan 2012
Posts: 32
ouch thats a ****ty feeling. good to hear its back up and runnin
Old Feb 16, 2012 | 09:45 PM
  #28  
Kuhn_man's Avatar
Senior Member
iTrader: (8)
 
Joined: Feb 2009
Posts: 474
From: Carol Stream, Il
sorry to hear bro... i remember my first lean nitrous backfire scares the h*ll out of you and youll never do it again....but for me it ended up throwin a rod threw the side of the block...so you got lucky
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mkaresh
8th Generation Maxima (2016-)
21
Mar 12, 2018 06:48 PM
jonreidhead
6th Generation Maxima (2004-2008)
3
Jan 6, 2016 09:38 AM
QueensMAX
5th Generation Maxima (2000-2003)
7
Sep 15, 2015 04:14 AM
kjlouis
4th Generation Maxima (1995-1999)
0
Sep 14, 2015 11:22 AM




All times are GMT -7. The time now is 12:24 PM.