4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Spent all night at the track

Thread Tools
 
Search this Thread
 
Old Apr 26, 2012 | 12:49 PM
  #1  
infinimax96's Avatar
Thread Starter
Senior Member
 
Joined: Jul 2011
Posts: 1,095
From: Salt Lake City, UT
Spent all night at the track

Test n Tune at Rocky Mountain Raceway 4/25/12

Got a few good runs in. Overall I'm happy with my times, and I am seeing gains when compared to last year's time slips. Unfortunately I've yet to get my 00VI installed although I have most of the parts needed. Hopefully I'll get it installed before the end of the season so that I can get a good comparison.

Track conditions: 4500ft altitude, 75deg F, 29.77in Absolute Barometric Pressure, 47% humidity, 13-18MPH headwind.
Car conditions: Dunlop Direzza 101 tires with about 30% tread life @25PSI, 91 octane pump gas, fresh oil change, fuel filter and air filter clean.

Slowest run of the night.
Time slip
R/T: .011
1/8: 10.759 @68.51mph
1/4: 16.397 @87.88mph

Motorsports Standard Atmosphere sea level correction: 1/4: 14.87 @ 96.87MPH

Fastest run was 16.166 @ 88mph

Last edited by infinimax96; Apr 27, 2012 at 01:13 PM.
Old Apr 26, 2012 | 01:22 PM
  #2  
97vqi30's Avatar
Junior Member
 
Joined: Jun 2011
Posts: 33
From: westmoreland CA.
nice run man! what are you launching at?
Old Apr 26, 2012 | 01:57 PM
  #3  
J2FRESH's Avatar
Banned
iTrader: (8)
 
Joined: Aug 2009
Posts: 2,726
From: Long Beach, CA/Las Vegas, NV/Oklahoma City, OK
nice
Old Apr 26, 2012 | 02:21 PM
  #4  
Snypa's Avatar
Senior Member
iTrader: (35)
 
Joined: May 2007
Posts: 7,389
From: I-75 4th_Laud
good stuff man. Sounds good 2 !
Old Apr 26, 2012 | 02:37 PM
  #5  
D I R T Y I 3 0's Avatar
Senior Member
 
Joined: Oct 2009
Posts: 1,410
From: Frederick, MD
Sure sounds good. 720p, GoPro by chance?
Old Apr 26, 2012 | 02:58 PM
  #6  
VincentXero86's Avatar
Member
 
Joined: Nov 2011
Posts: 268
From: Port Saint Lucie, Florida
I dnt know 2 much about max's but isnt the stock max quarter mile supposed to be at 15.3 +
O_o
Dont mean to sound slow <.<
Old Apr 26, 2012 | 08:13 PM
  #7  
infinimax96's Avatar
Thread Starter
Senior Member
 
Joined: Jul 2011
Posts: 1,095
From: Salt Lake City, UT
Originally Posted by 97vqi30
nice run man! what are you launching at?
I walked it off the line. This track is known for being very unforgiving on street tires.

Originally Posted by D I R T Y I 3 0
Sure sounds good. 720p, GoPro by chance?
I rather love how my exhaust turned out. Believe it or not I actually filmed this with my HTC Radar.

Originally Posted by VincentXero86
I dnt know 2 much about max's but isnt the stock max quarter mile supposed to be at 15.3 +
O_o
Dont mean to sound slow <.<
I'm 4500ft above sea level with 50% humidity and 30in of atmospheric pressure. That's why I converted the time using a drag racing calculator to convert my time to best racing conditions. Which was 14.87 sec at 96.87
Old Apr 26, 2012 | 08:17 PM
  #8  
J_MAxxX's Avatar
Member
 
Joined: Mar 2012
Posts: 133
From: Providence,RI
good run man, i've yet to install 00vi in mine too, but i've been itching to hit the track as well. Fck it by june i'll be ready
Old Apr 26, 2012 | 10:04 PM
  #9  
97vqi30's Avatar
Junior Member
 
Joined: Jun 2011
Posts: 33
From: westmoreland CA.
[QUOTE=infinimax96;8454459]I walked it off the line. This track is known for being very unforgiving on street tires.

thats understandable.. love the exhaust tone to is that all through an axle back or were you running an open flange?
Old Apr 27, 2012 | 12:37 AM
  #10  
infinimax96's Avatar
Thread Starter
Senior Member
 
Joined: Jul 2011
Posts: 1,095
From: Salt Lake City, UT
Originally Posted by J_MAxxX
good run man, i've yet to install 00vi in mine too, but i've been itching to hit the track as well. Fck it by june i'll be ready
I plan on getting mine on by this next month and getting some runs with it installed this year. All I need is gaskets and time to put it on and work out all the corks that come with the install process.

Originally Posted by 97vqi30

thats understandable.. love the exhaust tone to is that all through an axle back or were you running an open flange?
OBX-R V2 headers/ypipe, 240sx 3" test pipe, 3" custom catback, OBX-R series 5 muffler.
Old Apr 27, 2012 | 02:08 AM
  #11  
tosheto's Avatar
Senior Member
iTrader: (5)
 
Joined: Aug 2008
Posts: 1,509
From: on a tree
Nice sound. But how did you run in May 2012? It's still April?
Old Apr 27, 2012 | 01:12 PM
  #12  
infinimax96's Avatar
Thread Starter
Senior Member
 
Joined: Jul 2011
Posts: 1,095
From: Salt Lake City, UT
Originally Posted by tosheto
Nice sound. But how did you run in May 2012? It's still April?
haha, oops. Must have been a typo. Thanks for pointing that out.
Old Apr 27, 2012 | 01:48 PM
  #13  
tosheto's Avatar
Senior Member
iTrader: (5)
 
Joined: Aug 2008
Posts: 1,509
From: on a tree
Originally Posted by infinimax96
haha, oops. Must have been a typo. Thanks for pointing that out.
No problem. I was...my Maxima is fast, but not enough to travel in time

Last edited by tosheto; Apr 28, 2012 at 07:19 AM.
Old Apr 28, 2012 | 12:39 AM
  #14  
infinimax96's Avatar
Thread Starter
Senior Member
 
Joined: Jul 2011
Posts: 1,095
From: Salt Lake City, UT
Originally Posted by tosheto
No problem. I was...my car us fast, but not enough to travel in time
I did hit 88mph in one of my runs....
Old Apr 28, 2012 | 05:40 AM
  #15  
mrjasonlyrics's Avatar
Senior Member
 
Joined: Oct 2011
Posts: 1,245
Great launch and good shifting. I think my shift band is shorter in my 6thgen because I have to change to 4th gear just before the finish line. You only did 3 gears. I'm hoping to run a 14.0 or 13.99 next track day...
Old Apr 28, 2012 | 07:28 AM
  #16  
jholley's Avatar
Senior Member
iTrader: (13)
 
Joined: May 2008
Posts: 1,319
From: TN
Great run for a 4th GEN.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Miket2006
6th Generation Maxima (2004-2008)
4
Mar 1, 2021 03:55 AM
jonreidhead
6th Generation Maxima (2004-2008)
3
Jan 6, 2016 09:38 AM
fx4five
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
0
Oct 1, 2015 04:58 AM
sliptap
7th Generation Maxima (2009-2015)
2
Sep 30, 2015 05:57 AM




All times are GMT -7. The time now is 01:26 PM.