hey
i just got the NX #20923 and on here http://maxmods.dyndns.org/index.php?MaximaNitrous
it said that we should get a new fuel T, im new and dont know much about nitrous so do i really need to get one? if so, where can i get it from?
thanx
YAY

 

this is the perfect picture of what u need goto homedepot or lowes and get these parts.....

thank Jime for the pic i got it from his site

 

thanx............

 

Be sure to use teflon paste.

 

yes all teflon paste goes on all npt threads... compaines say NOT to use teflon paste on -AN threads... but u can use thread lock such as lock-tite to make sure they dont shake loose.

 

im buying this tonight...kit installs on thursday

 

Does the NX tee come with the kit? If so why are you using the HD version?

 

The one with the kit is only 1/4" and you need 5/16" to match the Nissan fuel hose size.

 

and good luck, those sizes are a Beeeyotch to get, 3 home depots, and 4 plumbing supply stores later i still didnt get it, ended up with an adapter type thingy to make it the sizes above....which bites......but good luck finding them, i looked in brooklyn/queens and i couldnt find em in those exact sizes....the guy at one of the plumbing supply places says they dont come in these sizes because they arent really practical sizes for plumbing jobs, so they will be difficult to get.....

 

so where is the best place to find these parts?

 

Small plumbing stores.

 

u can go to hopedepot and match the size of the hoses and barbs, i think i went slightly smaller and clamped the hoses on to death...lol, no leaks no problem, when u install, dont forget how much pressure is involved here, it can get nasty if u dont do it tight enough..

 

One size smaller? Isn't thats the size that comes in the kit. 1/4 = 4/16, looking for 5/16.

I reccommend using 2 clamps each side and have them facing different directions. (If I ever find the 5/16 adapters, may use the 1/4 in the meantime with a smaller shot)