Nitrous Discuss dry, wet, and direct port nitrous setups. How many shots can you handle?

Denso iridium PLugs??

Thread Tools
 
Search this Thread
 
Old 03-13-2005 | 04:43 PM
  #1  
NisMo-Max's Avatar
Thread Starter
Senior Member
iTrader: (40)
 
Joined: Jun 2004
Posts: 1,280
From: Cali, Bay-Area
Denso iridium PLugs??

When i did my 60 k service, i changed my plugs to Denso Iridium, now i thinking about getting a 50-75 shot of Nos, Will these plugs be suitable for the nos or will i have to change them???
Old 03-13-2005 | 05:22 PM
  #2  
Jime's Avatar
Banned
iTrader: (10)
 
Joined: Jan 2002
Posts: 4,924
From: https://t.me/pump_upp
They are VERY suitable for nitrous. I started using them last fall. Even 2 steps colder I ran my fastest N/A time of 13.5. So I just leave them in all the time.

From what I see not everyone gets the same performance, most guys say that running colder copper plugs decreases performance N/A but that hasn't been my experience with either the 3.0 or 3.5L.
Old 03-13-2005 | 07:41 PM
  #3  
theMax's Avatar
Senior Member
 
Joined: Nov 2000
Posts: 1,985
Originally Posted by Jime
From what I see not everyone gets the same performance, most guys say that running colder copper plugs decreases performance N/A but that hasn't been my experience with either the 3.0 or 3.5L.
Is this with the iridiums or other plugs? Do you think the normal heat range is good for a 50-75 shot?
Old 03-13-2005 | 09:15 PM
  #4  
Jime's Avatar
Banned
iTrader: (10)
 
Joined: Jan 2002
Posts: 4,924
From: https://t.me/pump_upp
Very few guys have tried Iridiums especially colder ones so my comments there are directed towards the copper ones. My experience with the Iridiums was very positive, although I have only tried 2 steps colder.

NGK recommend Iridums for nitrous applications if you read their literature.

I would go at least 1 step colder for a 50-75.

There is a chart here on my web page. http://jime.homeip.net/Plugs.html
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TKHanson
5th Generation Maxima (2000-2003)
6
11-24-2018 01:39 AM
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
trsandrew
7th Generation Maxima (2009-2015)
17
04-08-2016 06:45 PM
magiconthetire
Audio and Electronics
2
10-26-2015 09:03 PM
trsandrew
Group Deals / Sponsors Forum
2
10-25-2015 02:47 PM



Quick Reply: Denso iridium PLugs??



All times are GMT -7. The time now is 06:23 PM.