5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

manual transmission compatibility

Thread Tools
 
Search this Thread
 
Old Jan 22, 2017 | 03:40 PM
  #1  
aib13's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Jan 2017
Posts: 2
manual transmission compatibility

can a 2003 manual transmission be used on later year maximas?
Old Jan 22, 2017 | 04:13 PM
  #2  
Child_uv_KoRn's Avatar
Bad *** Newb
iTrader: (7)
 
Joined: Jun 2006
Posts: 4,975
Unless you know for a fact it doesn't have the 3rd gear synchro grind...


Old Jan 22, 2017 | 05:57 PM
  #3  
aib13's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Jan 2017
Posts: 2
Originally Posted by Child_uv_KoRn
Unless you know for a fact it doesn't have the 3rd gear synchro grind...


Im kind of new to the terminology what does 3rd gear synchro grind mean
Old Jan 22, 2017 | 06:19 PM
  #4  
AEKnight's Avatar
Member
 
Joined: Sep 2013
Posts: 194
Slight grinding noise when shifting into 3rd gear. Double clutching with a slight rev match helps to make the grind not so bad.
Old Jan 23, 2017 | 09:01 PM
  #5  
Derrick2k2SE's Avatar
Senior Member
iTrader: (3)
 
Joined: Oct 2004
Posts: 2,501
From: Pensacola, FL
Originally Posted by aib13
Im kind of new to the terminology what does 3rd gear synchro grind mean
Many 2002/03 trannys had a weak 3dr gear syncro which leads to a grinding when shifting hard into 3rd.

A better bet is to get a 2004-2006 tranny. They fixed the issue in 04. Even better is to get one with HLSD.
Old Jan 24, 2017 | 07:02 AM
  #6  
Child_uv_KoRn's Avatar
Bad *** Newb
iTrader: (7)
 
Joined: Jun 2006
Posts: 4,975
I'm 3 for 3 on HLSD with no issue. First and only open diff crunched.
Old Mar 14, 2017 | 04:42 AM
  #7  
Rinard Pratt's Avatar
Newbie - Just Registered
 
Joined: Feb 2017
Posts: 8
5sp swap

Does any one know if a 2000 5spd manual can be swapped with an earlier model 5spd? If so which yrs are compatible with out much part changes?
Old Mar 14, 2017 | 04:19 PM
  #8  
4thGenTuner's Avatar
Member
iTrader: (1)
 
Joined: Oct 2009
Posts: 210
From: Roanoke, VA
Originally Posted by Rinard Pratt
Does any one know if a 2000 5spd manual can be swapped with an earlier model 5spd? If so which yrs are compatible with out much part changes?

1995-2001 five speeds will all bolt up to a VQ30/DE-K. The 4th gens use (and some 2000 models built in '99) a VSS in the trans for the speedo. IIRC the '01s used the ABS sensors instead of a VSS. So yeah, anything in that year-range will work.
Old Mar 16, 2017 | 11:36 AM
  #9  
Rinard Pratt's Avatar
Newbie - Just Registered
 
Joined: Feb 2017
Posts: 8
Thanks for the info @4thGenTuner Also according to the haynes repair manual 95 and up manual transmissions have the same bell housing bolt pattern. The manual covers 93-2004 maximas. I am assuming that the bolt pattern for the manual transmissions for the 3.5 have the same bolt pattern as well. Correct me if I am wrong. If they do, do you know what parts would hsve to be swapped out to go with one from a later model?.or maybe even direct me to someone who may know if you can't answer the question. Also. Did some of 02-03 maximas come with the 5 spd manual transmission. Trying to weigh different options. Thanks again in advance.

Last edited by Rinard Pratt; Mar 16, 2017 at 11:39 AM.
Old Mar 16, 2017 | 09:50 PM
  #10  
SubwayVQ's Avatar
Senior Member
 
Joined: Dec 2016
Posts: 432
From: Wisconsin
Originally Posted by Rinard Pratt
Thanks for the info @4thGenTuner Also according to the haynes repair manual 95 and up manual transmissions have the same bell housing bolt pattern. The manual covers 93-2004 maximas. I am assuming that the bolt pattern for the manual transmissions for the 3.5 have the same bolt pattern as well. Correct me if I am wrong. If they do, do you know what parts would hsve to be swapped out to go with one from a later model?.or maybe even direct me to someone who may know if you can't answer the question. Also. Did some of 02-03 maximas come with the 5 spd manual transmission. Trying to weigh different options. Thanks again in advance.
02-05? (Correct me on the last year) Came with a 6spd, not a 5spd.
Old Mar 17, 2017 | 03:07 AM
  #11  
4thGenTuner's Avatar
Member
iTrader: (1)
 
Joined: Oct 2009
Posts: 210
From: Roanoke, VA
Originally Posted by Rinard Pratt
Thanks for the info @4thGenTuner Also according to the haynes repair manual 95 and up manual transmissions have the same bell housing bolt pattern. The manual covers 93-2004 maximas. I am assuming that the bolt pattern for the manual transmissions for the 3.5 have the same bolt pattern as well. Correct me if I am wrong. If they do, do you know what parts would hsve to be swapped out to go with one from a later model?.or maybe even direct me to someone who may know if you can't answer the question. Also. Did some of 02-03 maximas come with the 5 spd manual transmission. Trying to weigh different options. Thanks again in advance.
Step 1. Throw away the Haynes manual.

Step 2. Find the FSM for your specific model year.

Step 3. Read the FSM.

Step 4. ?????

Step 5. Profit/Swap trans & drive happy.

All bs aside, if you're wondering if a 5 speed will bolt up to a VQ35, the answer is yes.....kinda. None of the 02-03 cars came with a five speed. Some altimas had the VQ35 and 5 speed, but the mounts are different. If I were you I would stick to what came in the car. Keep it simple unless you're ready to do some custom motor mount work. So to be clear, VQ30 = 5 speed VQ35 = 6 Speed. If you have a VQ35, find a newer HSLD 6 speed.

Good luck & happy motoring.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
maxima-junky
5th Generation Classifieds (2000-2003)
2
May 6, 2020 08:34 PM
Viking Erik
1st-3rd Generations Classifieds (1981-1994)
3
Jan 22, 2018 07:10 AM
bhairya
5th Generation Maxima (2000-2003)
41
Jun 14, 2017 08:16 AM
Max_P
4th Generation Maxima (1995-1999)
12
Jan 21, 2017 09:35 PM
leomitz200
New Member Introductions
0
Dec 25, 2016 11:20 AM




All times are GMT -7. The time now is 04:14 AM.