This thread is for any new mods you have and mods to come . Post up your ride and give a list of mods and future mods . Thanks .

 

I am moddin' my 07 headlamps as we speak.

 

NWPEngineering intake manifold spacers, RacingLine strut bar cross/drilled Alien Performance rotors and BlueBatmobile yellow fog lights tint

 

Don't really have much things left except to pay for all these repairs that seem to pop out of nowhere. If all goes well then my future mods for the next year:

New rims and tires (in the next month or two), new paint job, new headlights with "added bonuses", and finally add halo fog lights.

After all of those. I'll finish it off with coilovers and spacers.

 

Nice car 6.5 , the tail lights are hot . My mods to come are the 07 swap just need a few other bits like hood,rear bumper, spoiler and a grille emblem . Mods to date Pioneer Avic 900BT,pioneer 12in subs, painted interior trim pieces , and aftermarket HID kit which I hate . For the 07 swap I will retrofit HID projectors and OEM ballast .

 

About a week ago, I installed ATL rotors with Hawk Ceramic pads. What an improvement!!! I also installed new Monroe Front strut mounts and Moog boots. I finally replaced the noisey Kyb mounts and boots that were installed 7 months ago. Finally I can go over bumps and not hear a thing.

Next Mods are new tires

 

Vmax man your car looks brand new how do you keep it that clean . Also where did you get the rotors and pads b/c Iam in need of some extra stopping power .

 

Ummmm....taking care of it?


As of lately, I have replaced my front windshield, painted front valve cover wrinkle red (also painted battery tie down, rad. mounts, and hood security button mount)

 

I just replaced my battery since it died... my service engine soon light went off after being on all year.

 

Thanks man. Looking forward to seeing some pics of all the mods you got planned. In for pics of the interior when you get the chance.

 

just did a few suspension mods, kcmaxx rear strut bar, racing line fsb, 25 and 20mm spacers, 8.5" rims (22lbs each) tempered Rear Sway Bar

and a y pipe

gotta say the suspension mods made her handle so much better. night and day. getting traction rods and end links soon.

 

About to put a remote start in my car second week of October. Also getting Led tails this November. Should I go with ruby red or black tails on a precession grey maxi?

 

Thanks bro

Just regular washing, and I hit it with the claybar twice a year. I got the ATL rotors off of ebay, and hawk pads off of Amazon. I had the posi quiets before. Big difference.

 

dude, this was the most worth while mod i've done so far.. i love my remote start. i got a viper 2 way

 

Yeah I was thinking about the viper two way @ best buy today but rather would have it work off my " Nissan keyfob " VS the "aftermarket one". Viper is The best in the business tho!

 

the only problem with that is the range. theres no reason to get a remote start if you can't start it when your at the check out in a store (for ex) and have have a cool car on hot days and a warm car on cold days. the nissan key fobs range is about when you can make eye contact with it not good enough.

i can't tell you how relaxing it is to be out in the heat all day and your max greets you with the fresh smell of leather and a cool breeze...

 

just finished my cat back. removed the fugly single 3 inch canisters and went with the vibrant 1148's - pics to follow later today

 

Custom built headers / y pipe

 

http://flic.kr/p/akdZb1
http://flic.kr/p/akdZbY
http://flic.kr/p/akdZd7
http://flic.kr/p/akdZdN
http://flic.kr/p/akbd6D


They sound much deeper than the other mufflers and I am really liking the quad look!!

 

So far I've got NWP spacers and ETL, UR crank pulley, Stillen SRI, EBC green stuff front pads, Goodridge SS brake lines, Hayden 403 trans cooler and 4g subframe collars installed. I've got a Cattman y-pipe on order. I have a uninstalled Transgo Reprogramming Kit I need to install sometime this month. I'm saving for coilovers, not sure what brand I'm getting but I have the Kuos Garage QT link when I do lower my car.

 

97 GXE 5mt, Cattman Y in the making with this group deal. Test pipe and Pacesetter short throw waiting to go in when the Y comes in. Also have a plan to snag up LED tails and a roof spoiler on Friday. Next up will be 00vi.

 

Oh yeah, and J30 projectors and R34's waiting to be retro'd.

 

Just put on ionic front lip, 350z wheels, AE headlights, 8k HID's and straight pipe. Waiting till spring to put on an 00vi

 

Just got mine back after being backed into:

 

Clean as a whistle. Liking the drop you got on there.

 

I passed 100k miles this past week. I'm hoping it'll last until it's paid off!

 

havent posted any pics up yet but everyone stay tuned my maxima is unique..its different nice maximas ppls

 

Takeda Intake CAI
Racingline Y-Pipe
eBay Cat-back
NWP block plate
NWP Spacers
Jet Maf sensor

07-08 mods:
Headlights(blacked out)
Front bumper
Grill(modified by myself)
hood
rear bumper
spoiler

Progress Springs
KYB Gr-2 Struts/Shocks
Progress RSB
Painted interior pieces
Painted under the hood covers
Painted intake manifold
5% tint all around
Debadged
MOMO Shift ****
350Z pedals

Coming Late September Led Tails
Coming Mid October Cattman headers

Also in the works going internal on the engine, Wilwoods big brake kit, different mufflers, aluminum radiator, ground kit made by myself and clutch kit and flywheel.

 

@ Sradtodrag man I did'nt know you were up here Iam on gixxer.com also. @ Raz man that car is gonna be a beast .

 

Looking to lower mine and about to put a custom exhaust.

 

How mine sits now, wow time is just flying by.... Lots of little stuff done, most recent are 20x10 MRR GT1 wheels and a fresh timing job.