Supercharged/Turbocharged The increase in air/fuel pressure above atmospheric pressure in the intake system caused by the action of a supercharger or turbocharger attached to an engine.

SC guys (mainly V1): More power and an Eaton roots sound...belts DO make a difference

Thread Tools
 
Search this Thread
 
Old 06-11-2003, 08:47 PM
  #1  
All YOUR grammer belong to me
Thread Starter
 
Craig Mack's Avatar
 
Join Date: Jul 2001
Posts: 7,400
SC guys (mainly V1): More power and an Eaton roots sound...belts DO make a difference

Many of you have seen my threads about me b!tching about my idler pulley and shredded belt. Well, the belt I had was a razor thin cheapo belt. Completely shredded off within a few thousand miles of having the supercharger on my car. It has today been replaced with a Dayco Poly-Cog, #5060695. This belt is at least 3x thicker then my old shredded belt, with thick blocks that hug the ribs on the pullies. The guy at AutoZone said this is the next best belt to the Goodyear Gatorback.

Sound Difference: Right off the bat, I noticed that with this belt, my supercharger now emits a different tone. Not at idle, but when revving or under a torque load. It emits a Ghostly howl that sounds VERY similer to the SVT Cobra and SVT Lightnings Eaton Roots Type blowers. Well I am in love. I don't know if this is coming from the belt itself, or if it's causing the compressor to make this noise, but I love it. At WOT there is a high pitched whine that hints at the Eaton Roots howl, which really adds flavor to the overall sound. This all may sound corny but I am very happy with this.

Power Difference: I noticed right after the install, that my car revved faster and seemed to accelerate quicker. But to insure that it wasn't just my untuned butt dyno, I drove spiritedly every now and then today. I spin into second gear more on the 1-2 shift, and the RPMs rise faster in general throughout the power band. The car is quicker with a slight increased feeling in torque. I did a downshift into second @42mph, and noticed more tire spinnage, more "pushed back in your seat" feeling, and the RPMs climbing faster.

I am positive i've gained power, and it makes sense. A rubber band like belt with a shredded rib vs. a thick and sturdy Poly-Cog with all ribs tightened up to spec....just like GTR_Rider had suspected I believe I've gained back boost pressure. My car is quicker then ever before.

So people, don't **** out on your belts. You could be missing an awesome sound, and more HP/TQ. BTW, the Dayco Poly-Cog was only $29.99.

Now, to tackle the rich fuel issue...
Craig Mack is offline  
Old 06-11-2003, 08:55 PM
  #2  
Senior Member
iTrader: (3)
 
MaxSpeedSE's Avatar
 
Join Date: Jan 2002
Posts: 1,516
MaxSpeedSE is offline  
Old 06-11-2003, 08:55 PM
  #3  
Permanent Maxima.org Resident
iTrader: (4)
 
Confused's Avatar
 
Join Date: Aug 2000
Posts: 2,715
why buy next to the best?

I gained over 20hp after fixing a belt issue

good job
Confused is offline  
Old 06-11-2003, 08:58 PM
  #4  
All YOUR grammer belong to me
Thread Starter
 
Craig Mack's Avatar
 
Join Date: Jul 2001
Posts: 7,400
Originally posted by Confused
why buy next to the best?

I gained over 20hp after fixing a belt issue

good job
Wow, 20hp, nice! Why not go with the Gatorback? Well, they had none in stock and there weren't any for miles so, this is the next best thing. Cheaper too. It is a quality belt....you gotta give it props.
Craig Mack is offline  
Old 06-11-2003, 09:17 PM
  #5  
I couldn't fix your brakes, so I made your horn louder
iTrader: (6)
 
turbomax97's Avatar
 
Join Date: Jan 2002
Posts: 2,588
cm didn't you also downsize to a 3.125?
turbomax97 is offline  
Old 06-12-2003, 07:41 AM
  #6  
All YOUR grammer belong to me
Thread Starter
 
Craig Mack's Avatar
 
Join Date: Jul 2001
Posts: 7,400
Originally posted by seximagtr
cm didn't you also downsize to a 3.125?

Yes....but the shredded belt was the proper size too. We couldn't measure though becuase it was....shredded.
Craig Mack is offline  
Old 06-12-2003, 02:54 PM
  #7  
All YOUR grammer belong to me
Thread Starter
 
Craig Mack's Avatar
 
Join Date: Jul 2001
Posts: 7,400
how many of you experience a sound change when changing to a different type of belt? My change was significant, so that's probubly why I got it...
Craig Mack is offline  
Old 06-12-2003, 04:01 PM
  #8  
RIP '98 Maxima SE
iTrader: (6)
 
BlackCat's Avatar
 
Join Date: Apr 2002
Posts: 4,262
I might be due for belt change soon...

Does your belt look like they have many notches that run 90 degrees across the ribs? I may have offered a Dayco belt a while ago but I turned it down because the Vortech document said to stay with the solid rib-type belt.
BlackCat is offline  
Old 06-13-2003, 03:24 PM
  #9  
RIP '98 Maxima SE
iTrader: (6)
 
BlackCat's Avatar
 
Join Date: Apr 2002
Posts: 4,262
This is the Poly-Cog:


I'll pick one up and give it a try the weekend after this one.
BlackCat is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Finkle
4th Generation Maxima (1995-1999)
13
09-27-2015 09:53 PM
maxipower
5th Generation Maxima (2000-2003)
2
08-21-2015 11:10 AM
maxinout93
5th Generation Maxima (2000-2003)
3
08-20-2015 02:17 AM
MaximaDrvr
7th Generation Maxima (2009-2015)
16
08-19-2015 08:20 PM
1992maximase30
4th Generation Maxima (1995-1999)
3
08-05-2015 09:27 PM



Quick Reply: SC guys (mainly V1): More power and an Eaton roots sound...belts DO make a difference



All times are GMT -7. The time now is 05:24 PM.