Belt snapped and bolts stuck
#1
Supporting Maxima.org Member
Thread Starter
iTrader: (9)
Join Date: Sep 2000
Location: Jax, NC
Posts: 3,728
Belt snapped and bolts stuck
ok so I am in a dire need for the three long hex head bolts in the smaller size...
my belt somehow went from perfect condition to dead on 2 ribs in about 4 miles...
so this evening I got the blower off in an hour 10 minutes ...(new record)
and I cannot get the hex head bolts off...three are damaged beyond use...
I have been referred to some place in Hesperia called NuttyBolts...for replacements...
anyone think they know of a source for these right away...I am gonna haev to pay to get these things removed tomorrow and the ****ES ME OFF
cause I like doing my own work...damn Stillen bracket...there is SO much LocTite there are hardly any that came off of all but last three without struggling...
so anyway I have all the parts I need except did not plan these bolts would be an issue...so I can go all the way down to 2.87 if I want but will likely go with 3.12 for now...
I NEED HEX HEAD BOLTS IN V2 sizes
my belt somehow went from perfect condition to dead on 2 ribs in about 4 miles...
so this evening I got the blower off in an hour 10 minutes ...(new record)
and I cannot get the hex head bolts off...three are damaged beyond use...
I have been referred to some place in Hesperia called NuttyBolts...for replacements...
anyone think they know of a source for these right away...I am gonna haev to pay to get these things removed tomorrow and the ****ES ME OFF
cause I like doing my own work...damn Stillen bracket...there is SO much LocTite there are hardly any that came off of all but last three without struggling...
so anyway I have all the parts I need except did not plan these bolts would be an issue...so I can go all the way down to 2.87 if I want but will likely go with 3.12 for now...
I NEED HEX HEAD BOLTS IN V2 sizes
#4
Re: Belt snapped and bolts stuck
I got my SC pulley bolt from Brafasco. $10 minimum order and it's a $0.50 part, so they gave it to me for free. Can't beat that price
I don't know if they have brafasco's in the states though. Could be a canada-only chain but I'm not sure.
I don't know if they have brafasco's in the states though. Could be a canada-only chain but I'm not sure.
#5
Re: Re: Belt snapped and bolts stuck
Originally posted by ereet
I got my SC pulley bolt from Brafasco. $10 minimum order and it's a $0.50 part, so they gave it to me for free. Can't beat that price
I don't know if they have brafasco's in the states though. Could be a canada-only chain but I'm not sure.
I got my SC pulley bolt from Brafasco. $10 minimum order and it's a $0.50 part, so they gave it to me for free. Can't beat that price
I don't know if they have brafasco's in the states though. Could be a canada-only chain but I'm not sure.
I am going to need one of those bolts too.
Thanks
#6
Supporting Maxima.org Member
Thread Starter
iTrader: (9)
Join Date: Sep 2000
Location: Jax, NC
Posts: 3,728
Well..I got the bolts heads drilled out and I replaced the pulley and belt...everything went back together ok,,,and the car is running but I am going to baby it some as I did not remove enough of the post to prevent rubbing.
So anyhow, at least I can drive again...and on a 3.12...
So anyhow, at least I can drive again...and on a 3.12...
Thread
Thread Starter
Forum
Replies
Last Post
litch
4th Generation Maxima (1995-1999)
123
01-04-2024 07:01 PM
tarun900
4th Generation Maxima (1995-1999)
19
12-20-2021 06:57 PM
RealityCheck
4th Generation Maxima (1995-1999)
7
10-02-2015 06:34 PM
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
09-29-2015 02:02 PM