Injectors
#1
Injectors
Maybe we should sticky this as a faq for boosted cars
Where did you guys get your 370 or 555 injectors from? How much did you pay for them? What kind did you buy? did they come from a 300z or are they from an aftermarket manufacturer?
Where did you guys get your 370 or 555 injectors from? How much did you pay for them? What kind did you buy? did they come from a 300z or are they from an aftermarket manufacturer?
#3
For 340cc and mabye 370cc injectors, you *SHOULD* be able to get away with turning down the base fuel pressure like Mardi did, however NOBODY has tried this yet.
The only option 2K+ Maximas have for larger injectors, ie 400+cc, will be a standalone ECU, so we might want to start looking into an auxilary fuel injector(s) controller ala Stillen 350z.
The only option 2K+ Maximas have for larger injectors, ie 400+cc, will be a standalone ECU, so we might want to start looking into an auxilary fuel injector(s) controller ala Stillen 350z.
Originally Posted by [maxi-overdose]
I have questions too:
do we need to do anything to the ECU once larger injectors are install?
do we need to do anything to the ECU once larger injectors are install?
#4
Originally Posted by IceY2K1
For 340cc and mabye 370cc injectors, you *SHOULD* be able to get away with turning down the base fuel pressure like Mardi did, however NOBODY has tried this yet.
The only option 2K+ Maximas have for larger injectors, ie 400+cc, will be a standalone ECU, so we might want to start looking into an auxilary fuel injector(s) controller ala Stillen 350z.
The only option 2K+ Maximas have for larger injectors, ie 400+cc, will be a standalone ECU, so we might want to start looking into an auxilary fuel injector(s) controller ala Stillen 350z.
Standalone?!? I have the Greddy profec e-01 & e-manage. Working on installing it now. I should be able to adjust the fuel pretty well w/that. It does both A/F and injectors. Sill tryin to figure it out!
Deac
#5
Originally Posted by IceY2K1
For 340cc and mabye 370cc injectors, you *SHOULD* be able to get away with turning down the base fuel pressure like Mardi did, however NOBODY has tried this yet.
Just to be clear.....
#6
I've *HEARD* the eManage can control 3xx cc injectors, but not any larger.
We need to find a 2K-2K1 injector to send in with a 350z injector to make sure they are the same.
We need to find a 2K-2K1 injector to send in with a 350z injector to make sure they are the same.
Originally Posted by Deac
Standalone?!? I have the Greddy profec e-01 & e-manage. Working on installing it now. I should be able to adjust the fuel pretty well w/that. It does both A/F and injectors. Sill tryin to figure it out!
Deac
Deac
#11
You can get RC Engineering injectors 3xx or 4xx, maybe higher, for around $80/each from SuperChargersOnline.com.
Originally Posted by DA-MAX
look up the seller "Powerhousejimbo" on Ebay he usually sells brand new sets of Nissan 370 and 555s for around $600(thats $100 per injector )
#12
Originally Posted by IceY2K1
You can get RC Engineering injectors 3xx or 4xx, maybe higher, for around $80/each from SuperChargersOnline.com.
#15
if i remember correctly there was some really good pricing at this site http://www.sportcarmotion.com/fuel.htm
#17
these are the injectors he was talking about http://cgi.ebay.com/ebaymotors/ws/eB...tem=2431488283
the seller is jdmturbochargerspecialist
the seller is jdmturbochargerspecialist
#18
How do you plan to control them? You have a '99 right? For the 95's and 96's they can get the JWT ECU with the Z maf and so on.
I heard e-manage would do it, but then some people are now saying that the emanage won't handle 550's on a Maxima.
I heard e-manage would do it, but then some people are now saying that the emanage won't handle 550's on a Maxima.
Originally Posted by Redmax
Addae, I could not find that guy
If I were to get the 550,'s that the place mtcookson is geting his from, is there anything else i would have to get ?
If I were to get the 550,'s that the place mtcookson is geting his from, is there anything else i would have to get ?
#19
Originally Posted by Redmax
Addae, I could not find that guy
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2434912559
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2436107758
good luck with Emanage Corey...problems, problems, problems...and you only get to witness the problems once you find a shop ballsy enough to work with the damned thing. and another thing does it even have a remotely close base map to start off on?? you're gonna be paying big loot especially to even get started tune in 550s.
#20
Well my goal hopefully is 400 to 450 to the wheels So I was looking to get 550's. Emanage everday is now looking like its not possible so I am researching other avenues. but I want to start getting all of the things that I need , ie injectors and maf. I may actually try running the car on a jwt and just having the cel on but we will see . I know 007 was changing his car over to fed spec. what does it take?
Thread
Thread Starter
Forum
Replies
Last Post
jmlee44
4th Generation Maxima (1995-1999)
8
10-02-2022 02:13 PM