I bought the kit used V1. and nothing came in the kit for the Power steering line relocation..I was looking on the parts list for the size line and its 3/8" 8ft of length...my main question is, is that all I will need to do the lines ?? I was thinking thats all I will need, with clamps of course to reroute them through the side panel and to the front of the car...then I looked at the parts list and this is
what I saw...

POWER STEERING ASSEMBLY
407000-16 Hose Power Steering to oil cooler, 3/8" ID 8ft
407500-37 12"L foam tube 1
407000-75 hose clamp #4 2
407100-01 aluminum "U" tube 1
407100-02 perforated back strap, 18"L 1
407100-03 M6-1.0x 12mm flange HHCS 3
407100-04 adel clamps SG6 3

this is what Stillen lists for rerouting the lines....Bold is my question parts

-matt

In one installation instruction I saw you may not need to do anything to the lines...who has put in there blower witout doing the lines ??

 

easy question, you will need the following

1. 9ft) 3/8 diameter high pressure hose, tell the counter salesperson that auto tranny fluid will be going thru it.

2. alloy U tube = brake line bent in half
or
alloy U tube = small little cooler

3. some clamps

4. 1 bottle of Dextron III

pictures below


http://images.cardomain.com/member_i...27_36_full.jpg

http://images.cardomain.com/member_i...27_37_full.jpg

 

Cant I just tap into the already existing metal lines that are in front of the radiator ?


-matt

 

the SE models already have the power steering cooler in front of the radiator. the GXE/GLE models do not. just run the (2) 3/8s hose to the existing power steering hard lines (cooler) and you will be good.

--Paul