Groupbuy for Zeitronix Wideband
#1
Groupbuy for Zeitronix Wideband
Just to let all your know there is a group buy on My350z.com for the Zeitronix Wideband. it's a great unit that shows boost, EGT, AFR, and Lambda. It also has real time datalogging. Just wanted to share with my fellow .org guys.
http://my350z.com/forum/showthread.p...0&pagenumber=1
http://my350z.com/forum/showthread.p...0&pagenumber=1
#5
*Bump*
Also I forgot to mention that the Unit is going to have a Custom Warm up Screen. Something Like this:http://www.zeitronix.com/gb/Porsche_full.mpg
So don't miss this GD if you don't have A Wideband yet.
Also I forgot to mention that the Unit is going to have a Custom Warm up Screen. Something Like this:http://www.zeitronix.com/gb/Porsche_full.mpg
So don't miss this GD if you don't have A Wideband yet.
#8
Moderator who thinks he is better than us with his I30
![](https://maxima.org/forums/images/smilies/support.gif)
iTrader: (8)
Join Date: May 2002
Posts: 9,335
Actually, if you have an existing boost sensor you can use that for data logging. The ZT-2 uses a 5v 3.5 bar boost sensor IIRC. If you have the same type boost sensor you can just splice in your existing oneand it will read and data log off of that. Even if you boost sensor is not exactly the same it will still read it and log it but the boost value will not be exactly right, but the logging of when boost comes on and such will still be the same.
The ZT-2 just has two wires comming off it for the boost sensor, so you just tap off you existing boost gauge and connect to those two wires comming off the ZT-2
The ZT-2 just has two wires comming off it for the boost sensor, so you just tap off you existing boost gauge and connect to those two wires comming off the ZT-2
#9
Originally Posted by I30tMikeD
Actually, if you have an existing boost sensor you can use that for data logging. The ZT-2 uses a 5v 3.5 bar boost sensor IIRC. If you have the same type boost sensor you can just splice in your existing oneand it will read and data log off of that. Even if you boost sensor is not exactly the same it will still read it and log it but the boost value will not be exactly right, but the logging of when boost comes on and such will still be the same.
The ZT-2 just has two wires comming off it for the boost sensor, so you just tap off you existing boost gauge and connect to those two wires comming off the ZT-2
The ZT-2 just has two wires comming off it for the boost sensor, so you just tap off you existing boost gauge and connect to those two wires comming off the ZT-2
![Big Grin](https://maxima.org/forums/images/smilies/biggrin.gif)
#11
I'm in on it. I was going to try to start one here, but the guy from Zeitronix more or less told me to just send people to the G35 GB. Plus I can't start group buys anyway.
#12
Guest
Posts: n/a
Originally Posted by I30tMikeD
Actually, if you have an existing boost sensor you can use that for data logging. The ZT-2 uses a 5v 3.5 bar boost sensor IIRC. If you have the same type boost sensor you can just splice in your existing oneand it will read and data log off of that. Even if you boost sensor is not exactly the same it will still read it and log it but the boost value will not be exactly right, but the logging of when boost comes on and such will still be the same.
The ZT-2 just has two wires comming off it for the boost sensor, so you just tap off you existing boost gauge and connect to those two wires comming off the ZT-2
The ZT-2 just has two wires comming off it for the boost sensor, so you just tap off you existing boost gauge and connect to those two wires comming off the ZT-2
Dang, that Mike is a smart guy!!!
![doublethumbsup](https://maxima.org/forums/images/smilies/dblthumb2.gif)
#15
SR20DEN,
Ya go for it the more people we have the less it will be. You can email g35twinturbo
at jdj27x@adelphia.net let him know what you wont.
Thanks
Ya go for it the more people we have the less it will be. You can email g35twinturbo
at jdj27x@adelphia.net let him know what you wont.
Thanks
#20
oh oh oh, there's my name! Neal, the deal is open till my b-day (2/15) so you still have a couple of weeks.
lambda is the change in a/f ratio, i think.
btw guys, i talked with one of my friends and we are going to work on a mount that would go on the steering column.
it would be made of fiberglass and adapted to the stock cover.
i just think that it would look good in front of the dash, or maybe next to where my afc is at.
Neal, did you every see where mine was mounted?
lambda is the change in a/f ratio, i think.
btw guys, i talked with one of my friends and we are going to work on a mount that would go on the steering column.
it would be made of fiberglass and adapted to the stock cover.
i just think that it would look good in front of the dash, or maybe next to where my afc is at.
Neal, did you every see where mine was mounted?
#21
Originally Posted by slimer
oh oh oh, there's my name! Neal, the deal is open till my b-day (2/15) so you still have a couple of weeks.
lambda is the change in a/f ratio, i think.
btw guys, i talked with one of my friends and we are going to work on a mount that would go on the steering column.
it would be made of fiberglass and adapted to the stock cover.
i just think that it would look good in front of the dash, or maybe next to where my afc is at.
Neal, did you every see where mine was mounted?
lambda is the change in a/f ratio, i think.
btw guys, i talked with one of my friends and we are going to work on a mount that would go on the steering column.
it would be made of fiberglass and adapted to the stock cover.
i just think that it would look good in front of the dash, or maybe next to where my afc is at.
Neal, did you every see where mine was mounted?
![Woot](https://maxima.org/forums/images/smilies/woot.gif)
keep us updated on the mount on the steering column, I would be Interested in this.
#24
Originally Posted by Prodeje79
Could you post how much the full package is for 10 or 20 ppl in?
Here are the following prices:
Pricing:
Based on the 10 units purchase
10 units:
Zt-2 Bundle $250
Zt-2 Bundle with the LCD display $360
Based on the 20 units purchase
20 units
Zt-2 Bundle $240
Zt-2 Bundle with the LCD display $350
Accesories
EGT Sensor
You probably already have one from your EGT gauge! We supply Zt-2 style 2 pin connector to retrofit your EGT probe. $59
Boost Sensor $130
Shipping Continental US by UPS ground $10
Shipping to Canada $21
Shipping International $38
We will refund $10 via PayPal if the GB exceeds 20 participants.
#25
Moderator who thinks he is better than us with his I30
![](https://maxima.org/forums/images/smilies/support.gif)
iTrader: (8)
Join Date: May 2002
Posts: 9,335
Originally Posted by blubyu2k2
Im curious if the LCD can just show a/f wideband numbers? I have all the other guages which are recordable so I dont need to view that info twice. Im interested in this also.
That is one thing that I did not like. Unless they changed it in the last few months, The User option (boost), EGT, and AF are all displayed no matter what. I can't remeber which it is, but if one of the sensors is not hooked up it either reads zero or some crazy meaningless number.
They way they have their data logging set up is very cool and user friendly.
#26
Originally Posted by I30tMikeD
That is one thing that I did not like. Unless they changed it in the last few months, The User option (boost), EGT, and AF are all displayed no matter what. I can't remeber which it is, but if one of the sensors is not hooked up it either reads zero or some crazy meaningless number.
They way they have their data logging set up is very cool and user friendly.
They way they have their data logging set up is very cool and user friendly.
#28
If cost is not really a concern, I'd seriously look at the PLX-M500:
http://www.plxdevices.com/M-Series_l...roductinfo.htm
It has the optional gauge you and I like Blu:
http://www.plxdevices.com/M-Series_l...roductinfo.htm
It has the optional gauge you and I like Blu:
![](http://www.plxdevices.com/M-Series-Accessories/2InchGauge/M-SeriesGauge3DBlack.jpg)
#29
i dont see any reason why you could not use that gauge with the Zeitronix Wideband
the gauge uses a 0-5v wideband signal to operate which the Zeitronix Wideband
has so i would think it would work fime and that gauge is only 130$
this shows the specs on the zt2
http://www.zeitronix.com/Products/zt2/zt2.htm
this shows the specs on the plx gauge
http://www.plxdevices.com/2InchGauges.htm
the gauge uses a 0-5v wideband signal to operate which the Zeitronix Wideband
has so i would think it would work fime and that gauge is only 130$
this shows the specs on the zt2
http://www.zeitronix.com/Products/zt2/zt2.htm
this shows the specs on the plx gauge
http://www.plxdevices.com/2InchGauges.htm
#33
Originally Posted by IceY2K1
BTW, I'm not knocking the Zeitronix, it's probably the best bang-for-buck WB02 out there.
#36
Yeah, however supposedly that only works with their PLX systems, which I'd assume is related to the above posted graphs linear output.
Someone could easily correct that, I'd bet.
Someone could easily correct that, I'd bet.
Originally Posted by mtcookson
i know plx devices units have a narrowband output that you could use.
#37
here's their narrowband output. they say that it should be compatible with just about any 1, 2, 3, or 4 wire narrowband setup. i would think being compatible with those that you could hook it up to any regular narrowband afr gauge.
![](http://www.plxdevices.com/M-Series-Controllers/NarrowbandOutputGraph.jpg)
#38
That's what the PLX outputs on narrowband, you need to know what the Zeitronix output looks like.
You'd lose resolution with the 0-1V narrowband vs. the 0-5V wideband. Probably not the best way to display and tune, but good enough for replacing a primary 02.
You'd lose resolution with the 0-1V narrowband vs. the 0-5V wideband. Probably not the best way to display and tune, but good enough for replacing a primary 02.
#40
That's doesn't mean it will work with the PLX NB->WB convertor, they don't show what they output for NB.
Originally Posted by slimer
zeitronix has the narrowband output. which bank should you put it on?