Need Help to find Z32 MAF...
#1
Get Off My Lawn
Thread Starter
iTrader: (59)
Join Date: Oct 2000
Location: Johnson City, TN
Posts: 5,631
Need Help to find Z32 MAF...
Anyone here have an extra z32 Maf around? I have went to ebay and even the z32 forums, no one has them. Ebay has them, but want $200 for an old used one. I know that Courtesy has them for $450 brand new and they are pricey, just seeking more affordable option. My local junk yards don't have one either. I know that many of you live in the "You pull it" areas where you can get a butt load of stuff for little to nothing. Thanks for the guidance! I'm pulling my '89 engine the weekend and will need it.
#10
Get Off My Lawn
Thread Starter
iTrader: (59)
Join Date: Oct 2000
Location: Johnson City, TN
Posts: 5,631
Clarification: I understood that the z32 and J30 Mafs were different somehow. I thought in thier reading limitations? Can anyone clarify this. If they are identical, that will help out. Car-Parts pulls up j30 MAF when searching for z32 component.
#11
Supporting Maxima.org Member
iTrader: (54)
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Originally Posted by Chris Gregg
Clarification: I understood that the z32 and J30 Mafs were different somehow. I thought in thier reading limitations? Can anyone clarify this. If they are identical, that will help out. Car-Parts pulls up j30 MAF when searching for z32 component.
-matt
#13
Get Off My Lawn
Thread Starter
iTrader: (59)
Join Date: Oct 2000
Location: Johnson City, TN
Posts: 5,631
I've done some further research and they are not the same. The Maxima and z31 and z32 (and others I'm sure) have a wide plug with 6 connectors, only uses 4. However, the J30 has a narrow connector with 4 connectors, all used. Would have to change out plugs on the harness. I could do it if I had confirmation of the wires from the J30 Maf. I have a Nissan FSM to trace the harness wires on the Maxima. There is a thread in the stickies that refers to this. I've already re-wired my MAF harness plug previously, did so to extend the wires becuase I relocated my MAF. Re-wiring the harness is nothing. Really rather just get a z32 MAF and not worry about fooling with it.
#15
Originally Posted by Chris Gregg
Anyone here have an extra z32 Maf around? I have went to ebay and even the z32 forums, no one has them. Ebay has them, but want $200 for an old used one. I know that Courtesy has them for $450 brand new and they are pricey, just seeking more affordable option. My local junk yards don't have one either. I know that many of you live in the "You pull it" areas where you can get a butt load of stuff for little to nothing. Thanks for the guidance! I'm pulling my '89 engine the weekend and will need it.
#16
Get Off My Lawn
Thread Starter
iTrader: (59)
Join Date: Oct 2000
Location: Johnson City, TN
Posts: 5,631
Interesting suggestion. I'm truly not that cheap! I'll spend $500 before trying this mod. I'll do one of three things. Run rich for awile with stock MAF; re-wire MAF harness again, this time for J30 4 plug MAF; or get a z32 MAF off carparts.com. Thanks for all the guidance guys!
Thread
Thread Starter
Forum
Replies
Last Post
pears
5th Generation Maxima (2000-2003)
15
09-18-2015 05:25 AM