New Gates Racing Performance micro V belts
09-15-2006, 02:57 PM
#1
Supporting Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Aug 2000
Location: Las Vegas, NV
Posts: 997
New Gates Racing Performance micro V belts
Gates Racing Performance Products include:
Micro-V® Belts – designed and built to satisfy the tuner demand for performance and reliability; last three times longer than the competition
USE YOUR STREET SMARTS.
RIDE WITH THE ULTIMATE IN RELIABILITY.
Precision Belt Profile. Belts are precision ground, not cut, so they fit the pulley with absolute perfection.
Durable, Heat-resistant Overcord. The heat-resisting polyester fabric is reinforced with a patented EPDM compound.
Super Strong Tensile Cord. High-modulus, low-stretch polyester means Herculean strength for high load-carrying capability.
Heat Beating Undercord. Aramid reinforcement in a patented EPDM compound for three times the heat resistance and durability of standard belts.
Specially Engineered Adhesion Layer. Our patented EPDM compound gives Gates Racing belts extended service life.
http://www.gatesracing.com/belt.cfm
The Gates Racing belts are made of a high performing construction and have aramid fibers in the belt. Aramid is a Kevlar equivalent.
I have been in touch with the brass at the factory and they well get back to me soon on the belts matching our sizes and on the sizes they can add to their line to accomadate us..
He said he knows one belt already that will take the place of the
Gates K060705, which is the one for the 3.25 3.125 pulleys. He is sending me one next week to check out.
Please don't contact them until I get the information
Thanks!!
Micro-V® Belts – designed and built to satisfy the tuner demand for performance and reliability; last three times longer than the competition
USE YOUR STREET SMARTS.
RIDE WITH THE ULTIMATE IN RELIABILITY.
Precision Belt Profile. Belts are precision ground, not cut, so they fit the pulley with absolute perfection.
Durable, Heat-resistant Overcord. The heat-resisting polyester fabric is reinforced with a patented EPDM compound.
Super Strong Tensile Cord. High-modulus, low-stretch polyester means Herculean strength for high load-carrying capability.
Heat Beating Undercord. Aramid reinforcement in a patented EPDM compound for three times the heat resistance and durability of standard belts.
Specially Engineered Adhesion Layer. Our patented EPDM compound gives Gates Racing belts extended service life.
http://www.gatesracing.com/belt.cfm
The Gates Racing belts are made of a high performing construction and have aramid fibers in the belt. Aramid is a Kevlar equivalent.
I have been in touch with the brass at the factory and they well get back to me soon on the belts matching our sizes and on the sizes they can add to their line to accomadate us..
He said he knows one belt already that will take the place of the
Gates K060705, which is the one for the 3.25 3.125 pulleys. He is sending me one next week to check out.
Please don't contact them until I get the information
Thanks!!
09-15-2006, 07:02 PM
#3
Supporting Maxima.org Member
Thread Starter
iTrader: (1)
Join Date: Aug 2000
Location: Las Vegas, NV
Posts: 997
Originally Posted by BlackCat
Good to know! I need to get a new belt before I get matty's plate.
Let us know when they're put on the market.
Let us know when they're put on the market.
Gates K060705, which is the one for the 3.25 3.125 pulleys. He is sending me one next week to check out.
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
RWCreative
4th Generation Maxima (1995-1999)
9
09-21-2015 11:01 AM