_ck69_

I'm looking into getting a set of used volks, but I wanted to run this by you guys before I do. Will 18 x 7.5 48+ offset and the rubbers r 225/35/18 fit properly on my 4th gen? And... will it clear a Cobra BBK? Thanks for your help in advance.

1FSTMAX

iTrader: (29)

probably not..

_ck69_

what would be the problem?

Bonka

iTrader: (13)

Offset is too high. May rub on the inside. On offset alone it won't clear the 300zx caliper. Depending on spoke design you'll need at least a 10mm spacer. What model are the Volks?

_ck69_

I'm a little confused...
So, the wheels WILL fit, but the BBK will not unless I get some spacers. Is this correct?

Bonka

iTrader: (13)

Correct. But at +48, it's definitely a Honda offset. Might be too high and rub the strut. It'll definitely rub on the inside tire well. If you want them, meet up with the seller and test fit them.

_ck69_

damnit! I didn't want to hear that. I'll have to get the wheels mounted to check them out. Thanks for your help Bonka!

browne

someone here told me they put on 48 offset on 4th gen and it fit fine. let me know if yours fit cuz i got a great deal on the same size rim and offset.

Bonka

iTrader: (13)

I suppose if you get 5mm spacers for the front and rear it'll work fine.

Depending on how much those Volks are going to set you back it might be better finding a set with a proper offset for the Maxima.

At any rate, test fit them, if you like them and if the price is real good just get them.

dubsonmax

It will definately fit but it will rub in the inside fender wall. And u will need spacers to push them out a little. I know because i have 20 X 9 with a 45 offset. Hope this helps any.

IIColinII

Anyone knows if the 6th gen oem SE wheels and the 5th gen OEM se wheels will fit on a 4th gen max without any rubbing or so? or i might need spacer or something?

1FSTMAX

iTrader: (29)

i have 48mm offset.. they don't rub..