Anyone weighed FN01R-C, RPF1, SSR Competition (type C)?
#1
Senior Member
Thread Starter
iTrader: (10)
Join Date: Nov 2004
Location: Santa Barbara, CA
Posts: 9,107
Anyone weighed FN01R-C, RPF1, SSR Competition (type C)?
Alright, so sometime in the future I'll be looking for some lightweight 17*9s that will fit over a 2k4/Z32 BBK.
I'm not going to spend a royal assload of money, so I'm looking at decently cheap wheels as well. So far I've narrowed it down to:
Kosei K1-TS (Advertised 15.6lbs, ~$250, 17*9J +38)
5zigen FN01R-C (Advertised 17lbs, ~$200, 17*9J +35)
Enkei RP-F1 (Advertised 15.9lbs, ~$250, 17*9J +35)
SSR Competitions (Advertised 15.2lbs, ~$420+, 17*9J +40)
I was leaning towards the FN01R-Cs mainly because of price, however, I've read that they're actually closer to 19.5lbs than the advertised 17lbs (as confirmed on their website )
Now for the point of the thread. Has anybody personally weighed any of these wheels? I'd like to know the ACTUAL weight.
If anybody's wondering, I'm leaning much more towards RP-F1s as I like their style and I think ET35 is pretty much the perfect offset for a 17*9J on a 4th gen. (price of the SSR comps doesn't help either)
I'm not going to spend a royal assload of money, so I'm looking at decently cheap wheels as well. So far I've narrowed it down to:
Kosei K1-TS (Advertised 15.6lbs, ~$250, 17*9J +38)
5zigen FN01R-C (Advertised 17lbs, ~$200, 17*9J +35)
Enkei RP-F1 (Advertised 15.9lbs, ~$250, 17*9J +35)
SSR Competitions (Advertised 15.2lbs, ~$420+, 17*9J +40)
I was leaning towards the FN01R-Cs mainly because of price, however, I've read that they're actually closer to 19.5lbs than the advertised 17lbs (as confirmed on their website )
Now for the point of the thread. Has anybody personally weighed any of these wheels? I'd like to know the ACTUAL weight.
If anybody's wondering, I'm leaning much more towards RP-F1s as I like their style and I think ET35 is pretty much the perfect offset for a 17*9J on a 4th gen. (price of the SSR comps doesn't help either)
#3
Senior Member
Thread Starter
iTrader: (10)
Join Date: Nov 2004
Location: Santa Barbara, CA
Posts: 9,107
Originally Posted by irish44j
my 17x8 fno1r-c actually weigh in just a hair under 17lbs. Weighed on a bathroom digital scale, but it's usually pretty accurate.
However it is good to know that at least the 5zigen website is being honest. Thanks for the info y0!
#5
Senior Member
Thread Starter
iTrader: (10)
Join Date: Nov 2004
Location: Santa Barbara, CA
Posts: 9,107
Originally Posted by steven88
I'm sure the RPF1's are correct...there was a member here who weighed them...and it was around 16lbs...he had the 17x9's as well...
I know Z32Drifter has a set, but they're 17*8.5 or 8 and 17*9.5..
#6
Originally Posted by MorpheusZero
Really? Do you recall who it was?
I know Z32Drifter has a set, but they're 17*8.5 or 8 and 17*9.5..
I know Z32Drifter has a set, but they're 17*8.5 or 8 and 17*9.5..
#7
Originally Posted by steven88
hes a banned member...so you won't find any of his posts or existence of his SN...and I shouldn't mention him either becuz of how much the mods hate him
#8
Senior Member
Thread Starter
iTrader: (10)
Join Date: Nov 2004
Location: Santa Barbara, CA
Posts: 9,107
Originally Posted by irish44j
whaaaa? how did he get banned? I can think of alot of other members who deserve a ban alot more than he would.
...Censored.
#9
Originally Posted by steven88
hes a banned member...so you won't find any of his posts or existence of his SN...and I shouldn't mention him either becuz of how much the mods hate him
i know who it is!
#10
Originally Posted by steven88
hes a banned member...so you won't find any of his posts or existence of his SN...and I shouldn't mention him either becuz of how much the mods hate him
lol - yeah I was gonna say... he loved those RPF1s but he's long gone and you can't even type out his screenname...
#12
Senior Member
Thread Starter
iTrader: (10)
Join Date: Nov 2004
Location: Santa Barbara, CA
Posts: 9,107
Originally Posted by Nealoc187
BTW Mardigras has some 17x8.5 Comps for sale right now with Michelin Pilots for a helluva price. If I didn't already have them myself, I'd be buying those.
#13
WOW I didn't know I was banned...lol
the 17x8.5s are just over 16lbs and the 17x9.5s were right at 16lbs. The weight diff is in the wheel design. I would expect the 17x9 to be in the same range.
(I have not been over here for a week or so, I've been doing research on future boost. Sorry guys I think the pair of GT28rs I've been looking at would be wasted on the Maxima)
the 17x8.5s are just over 16lbs and the 17x9.5s were right at 16lbs. The weight diff is in the wheel design. I would expect the 17x9 to be in the same range.
(I have not been over here for a week or so, I've been doing research on future boost. Sorry guys I think the pair of GT28rs I've been looking at would be wasted on the Maxima)
#14
Originally Posted by z32drifter
WOW I didn't know I was banned...lol
the 17x8.5s are just over 16lbs and the 17x9.5s were right at 16lbs. The weight diff is in the wheel design. I would expect the 17x9 to be in the same range.
the 17x8.5s are just over 16lbs and the 17x9.5s were right at 16lbs. The weight diff is in the wheel design. I would expect the 17x9 to be in the same range.
not you. He's talking about some one else in California
#15
More than one z32drifter with RPF1s ...small world. I expected as much since the other screen name had a capital Z and D. I know there was another 4th gen guy with RPF1s ...1fastmax IIRC. He had 17x9s a few years ago.
One note on the 17x9 +35 the rear wheel looks perfect but the front will stick out about 5mm.
17x9 +34 with a 255/40/17
One note on the 17x9 +35 the rear wheel looks perfect but the front will stick out about 5mm.
17x9 +34 with a 255/40/17
#16
Originally Posted by z32drifter
More than one z32drifter with RPF1s ...small world. I expected as much since the other screen name had a capital Z and D. I know there was another 4th gen guy with RPF1s ...1fastmax IIRC. He had 17x9s a few years ago.
One note on the 17x9 +35 the rear wheel looks perfect but the front will stick out about 5mm.
17x9 +34 with a 255/40/17
One note on the 17x9 +35 the rear wheel looks perfect but the front will stick out about 5mm.
17x9 +34 with a 255/40/17
#17
Supporting Maxima.org Member
iTrader: (15)
Join Date: Feb 2003
Location: Los Angeles, CA
Posts: 3,431
I have the 17x8.5 RPF1's...nothing but praise thus far...they seem to be one of the only affordable, wide, good offset, proven strong (they are used in speed world challenge series), and lightweight wheels out there these days...everything else that is as light is either forged=way too expensive or heavier and weak...stories of cracked spokes after a hard track weekend, etc.
nonetheless, every wheel mentioned in the first post have an outstanding track record...I don't think you can go wrong with anyone of them...
nonetheless, every wheel mentioned in the first post have an outstanding track record...I don't think you can go wrong with anyone of them...
#18
Senior Member
Thread Starter
iTrader: (10)
Join Date: Nov 2004
Location: Santa Barbara, CA
Posts: 9,107
Originally Posted by z32drifter
More than one z32drifter with RPF1s ...small world. I expected as much since the other screen name had a capital Z and D. I know there was another 4th gen guy with RPF1s ...1fastmax IIRC. He had 17x9s a few years ago.
One note on the 17x9 +35 the rear wheel looks perfect but the front will stick out about 5mm.
17x9 +34 with a 255/40/17
One note on the 17x9 +35 the rear wheel looks perfect but the front will stick out about 5mm.
17x9 +34 with a 255/40/17
Originally Posted by michaelnyden
I have the 17x8.5 RPF1's...nothing but praise thus far...they seem to be one of the only affordable, wide, good offset, proven strong (they are used in speed world challenge series), and lightweight wheels out there these days...everything else that is as light is either forged=way too expensive or heavier and weak...stories of cracked spokes after a hard track weekend, etc.
nonetheless, every wheel mentioned in the first post have an outstanding track record...I don't think you can go wrong with anyone of them...
nonetheless, every wheel mentioned in the first post have an outstanding track record...I don't think you can go wrong with anyone of them...
I'll definitely be going with the RPF1s when I get the cash, however I'm not sure when that will be.
#20
Guest
Posts: n/a
Originally Posted by Nealoc187
lol - yeah I was gonna say... he loved those RPF1s but he's long gone and you can't even type out his screenname...
But the 17x9's are about 15.5 lbs.
#21
Guest
Posts: n/a
Originally Posted by michaelnyden
I have the 17x8.5 RPF1's...nothing but praise thus far...they seem to be one of the only affordable, wide, good offset, proven strong (they are used in speed world challenge series), and lightweight wheels out there these days...
#22
Supporting Maxima.org Member
iTrader: (15)
Join Date: Feb 2003
Location: Los Angeles, CA
Posts: 3,431
I got owned by peter...lol...now I will have to own you on the MCC forums (you know me being the admin and creater and all...lol...j/k
unfortunately (and as many of us know & appreciate) a lot of wheels that might look good, severely comprimise performance by adding a tremendous amount of unsprung weight...
if you want the fn01r-c look, but not the weight, and have the money, 5zigen makes a forged version--the fn01r (w/o the "c"), but they don't come in many sizes like the cast version...
it had nothing to do with being orginal, I just looked at what was in my price range and what people were suggesting/using at the track and it's specs...plus I got them for wholesale...
unfortunately (and as many of us know & appreciate) a lot of wheels that might look good, severely comprimise performance by adding a tremendous amount of unsprung weight...
if you want the fn01r-c look, but not the weight, and have the money, 5zigen makes a forged version--the fn01r (w/o the "c"), but they don't come in many sizes like the cast version...
it had nothing to do with being orginal, I just looked at what was in my price range and what people were suggesting/using at the track and it's specs...plus I got them for wholesale...
Thread
Thread Starter
Forum
Replies
Last Post
trsandrew
7th Generation Maxima (2009-2015)
17
04-08-2016 06:45 PM
trsandrew
Group Deals / Sponsors Forum
2
10-25-2015 02:47 PM
NismoMaxi02
5th Generation Classifieds (2000-2003)
1
10-04-2015 09:09 PM