Anyone put an 18x10 wheels on a 5th gen maxima for the back wheels?

 

i think there was someone that did 19x10 in the back. i think it was indescentmax but i am not sure

 

Im running 9.5's rear + 20 offset. 265/40/18's

 

whats your offset and tire size? i ran 19x10s on a 4th gen.

 

18x9 33 offset front
18x10 39 offset back

droped on h-techs.....1.6front 1.0back

Just came back from a shop and the guy said the rim is right against the spring and will not fit!

 

It will fit I ran the same size +35 though 245/45/18

 

That's why you run coilovers.

Get a spacer.

 

How did you do it if they are right up against your springs?

Is your car a 5th gen?

any help would be great i spent alot of money on these wheels and am screwed if they dont fit.

 

you'll be fine! i'm running a 19x9 with a +30 w/ a 265/30 on the rear..only reason i'm rubbing is because of the i-beam not being centered...and i'm dropped 2" all the way around

 

i got some but they arent here yet. go check out essential1's I30 same car pretty much

 

it seems i need spacers for the front and back is what im being told by the shop where my wheels are.

 

That can't be right, especially the front. Considering I was running 18x9.5 +35 in the front of a fourth gen for a while (with stock diameter springs and coilovers too), which has LESS clearance in the front compared to your 9j +33. Take them somewhere else.

The rear I would have to double check. Or just go out and measure. Make them physically show you the interference.