Ok Im contemplating on buying these wheels. I have a 4thgen and the size of the wheels are as follows, 17/18 x 8.5/9.5, 56/61mm offset. I will need to run adapter 1 inch thick. Does anybody know if that's gonna be too much? The wheels already have tires on them (stretched).

 

you're going to need at least a 25mm spacer

 

A 25mm spacer on top of the 1inch adapter?

 

maybe you'll be ok, itll kick the rear out to +35.6 and front to +30.6..i'm not sure what offsets are run exactly on 4th gens, but thats not a bad setup i know on 5th gens

 

Holy positive offset batman.. I don't think those will clear your strut as is. Honestly, I would look at something that comes in a +30-35. Start out closer to where you want to be.

 

Your right.. They are corvette c5 wheels. And I figured with the adapter on I shouldn't have any strut clearance issues. But yea. I'll keep looking. I just wanted some input

 

By adapter, do you mean both as a spacer and to fit them on your bolt patter? IIRC, they are not the correct bolt pattern for our cars (5x114.3).

 

I think he means bolt-on wheel adapters. He's considering a 1-inch (or about 25mm) thick adapter that will adapt the C5 bolt pattern to 5x114.3mm.

With the adapter I think those offsets would work on a A33, but I have no idea on the clearance involved in on an A32.

 

Your right.. They are corvette c5 wheels. And I figured with the adapter on I shouldn't have any strut clearance issues. But yea. I'll keep looking. I just wanted some input

 

I'm just really getting into this whole stance thing. Right now I have 18 inch evo 5's but i wanna try something new. I just hate to go and buy some adapters and the wheels still don't clear

 

My I35 wheel offset hero!!11one!!!

Ahh I see. The A32 is nearly identical to the A33B (scary-similar). So I think he should be fine.

 

go for it man, i hope it works out for you i'm kind of anxious to see the lines of the c5 wheels with the 4th gen body

 

I'd be interested in seeing what the setup looks like. C5/C6 wheels were never something I ever even considered because I always assumed they ran some extremely-low offset from the factory, thus making the use of adapters all but impossible.

 

I ordered one adapter to do a test fit.. I'll make a thread or post it in here what it looks like.. I'm hoping they poke out alittle bit so I can utilize the stretched tires

 

wur r u tryin to ahieve??? 8.5 +35 is near flush front n so is 9.5 rear