NV Bronze/polished lip Volk TE-37/LE-37's, 5x114.3, 18x8.5"
Thread Starter
Joined: Apr 2006
Posts: 533
From: Las Vegas
Bronze/polished lip Volk TE-37/LE-37's, 5x114.3, 18x8.5"
I was holding on to these for the last couple of years but I'm over modding my car, so they're up for sale. They are genuine Rays Engineering/Volk wheels - they have "Rays/Forged/Made in Japan" cast on the back side, and they're very light (17.6 lbs each on my home scale). They are the "Limited Edition" TE-37's, or LE-37's. They were used by a local Evo racer, so they saw a lot of track duty, and the stickers peeled off from the heat. I got an extra set of blue stickers with them, so those are brand new, you can decide if you want to put them on or not. Also, no center caps. 
Offset: 30mm - I'm not 100% sure since it's not on the wheel, and the Rays stickers on the inside of the wheel with the size/offset lost their lettering over time. I measured the backspacing (152mm is the closest I could get) and did the math from there, it comes out to 32mm, but I think 30mm is the most common size for these.
And the bad news is... one wheel has a small (maybe 1" long) hairline crack on the backside. I got a quote from a local shop to fix it for $150, and I can do that if the buyer is interested, but I thought it might be better to get that done locally so you can have it warrantied in case there is a problem. Also, if you don't like the color, I can have them powdercoated any color you want locally as well for an extra $250.
Check out the pics, I have closeups of each individual wheel face. There are no curb marks, just a couple of small scuffs from tire mounting/dismounting. I have several pictures of the crack, the backside of the wheel, and other angles of the wheel.
Pics: http://www.rafalr.com/forsale/maxima/volks/
Asking $1200 plus shipping (should be less than $100 to ship, they're pretty light) as they sit. If you want the crack fixed, add $150. I think that's pretty reasonable, I checked around and used prices for these wheels are in the 1600-1800 range, some are over 2 grand with tires, but I'm open to serious offers close to my asking price.
Offset: 30mm - I'm not 100% sure since it's not on the wheel, and the Rays stickers on the inside of the wheel with the size/offset lost their lettering over time. I measured the backspacing (152mm is the closest I could get) and did the math from there, it comes out to 32mm, but I think 30mm is the most common size for these.
And the bad news is... one wheel has a small (maybe 1" long) hairline crack on the backside. I got a quote from a local shop to fix it for $150, and I can do that if the buyer is interested, but I thought it might be better to get that done locally so you can have it warrantied in case there is a problem. Also, if you don't like the color, I can have them powdercoated any color you want locally as well for an extra $250.
Check out the pics, I have closeups of each individual wheel face. There are no curb marks, just a couple of small scuffs from tire mounting/dismounting. I have several pictures of the crack, the backside of the wheel, and other angles of the wheel.
Pics: http://www.rafalr.com/forsale/maxima/volks/
Asking $1200 plus shipping (should be less than $100 to ship, they're pretty light) as they sit. If you want the crack fixed, add $150. I think that's pretty reasonable, I checked around and used prices for these wheels are in the 1600-1800 range, some are over 2 grand with tires, but I'm open to serious offers close to my asking price.
Last edited by fellfrosch7; Jan 2, 2012 at 10:29 PM.
TE37's are fully powdercoated, TE37's with polished lip = LE37
LE37T's in gold finish & 18x8.5 came in +22 +30. Yours is likely the later.
LE37T's in gold finish & 18x8.5 came in +22 +30. Yours is likely the later.
Last edited by QT1 5MT AE; Aug 20, 2011 at 05:38 PM.
Thread Starter
Joined: Apr 2006
Posts: 533
From: Las Vegas
Thread
Thread Starter
Forum
Replies
Last Post