Wheels/Tires Looking for a new set of shoes for your car? Check out this forum. Sponsored by X-Rims.com

NJ WTB: OEM RX-7 FD Wheels

Thread Tools
 
Search this Thread
 
Old Jan 8, 2012 | 08:48 AM
  #1  
jbrooks870's Avatar
Thread Starter
Senior Member
iTrader: (4)
 
Joined: Aug 2007
Posts: 567
From: Northern Jersey
WTB: OEM RX-7 FD Wheels

Just as the title says.

Im looking for a set of OEM 16x8 RX-7 FD wheels.

PM if you have a set for sale.

I will also accept a set of aftermarket 16x8 wheels as well.

Thanks.

This thread is also posted on other relevant forums as well.

Last edited by jbrooks870; Feb 5, 2012 at 07:32 PM.
Old Jan 8, 2012 | 09:54 AM
  #2  
tseng1023's Avatar
Senior Member
iTrader: (9)
 
Joined: May 2011
Posts: 1,221
From: Philadelphia, PA
Good luck finding these on MAXIMA.ORG
Old Jan 8, 2012 | 10:36 AM
  #3  
jbrooks870's Avatar
Thread Starter
Senior Member
iTrader: (4)
 
Joined: Aug 2007
Posts: 567
From: Northern Jersey
Originally Posted by tseng1023
Good luck finding these on MAXIMA.ORG
The RX-7 has the same bolt pattern as a Maxima, these wheels are also popular with 4th Gens as I have seen a few members with these wheels.

Your sarcasm is unnecessary and I hope that you keep further posts to yourself as your comment has helped me in no way at all. I have also added that this thread was posted on other forums to discourage such posts as you have demonstrated.

If you can offer no help or insight, then please refrain from responding.
Old Jan 10, 2012 | 12:19 PM
  #4  
Quickywd01's Avatar
Senior Member
iTrader: (16)
 
Joined: May 2007
Posts: 3,078
From: NorthernNJ
Originally Posted by tseng1023
Good luck finding these on MAXIMA.ORG
These wheels fit our cars and are factory lightweights. I have a set, shoot me a pm.
Old Jan 10, 2012 | 08:28 PM
  #5  
emdot's Avatar
Senior Member
iTrader: (4)
 
Joined: Dec 2006
Posts: 1,005
From: Philly,PA
^^ think you just found your set lol.

I had some on my 4th gen with radials on them. i needed a 5mm spacer in the front to clear the coils with the stock FD tire size. just a heads up, you might run into that problem.

2007ish
Old Jan 10, 2012 | 08:37 PM
  #6  
VQtHuRtY's Avatar
Senior Member
iTrader: (3)
 
Joined: Aug 2009
Posts: 659
From: San Antonio
Originally Posted by jbrooks870
The RX-7 has the same bolt pattern as a Maxima, these wheels are also popular with 4th Gens as I have seen a few members with these wheels.

Your sarcasm is unnecessary and I hope that you keep further posts to yourself as your comment has helped me in no way at all. I have also added that this thread was posted on other forums to discourage such posts as you have demonstrated.

If you can offer no help or insight, then please refrain from responding.
Ouch! Owned. To the OP, good luck with what your looking for.
Old Jan 11, 2012 | 06:06 PM
  #7  
jbrooks870's Avatar
Thread Starter
Senior Member
iTrader: (4)
 
Joined: Aug 2007
Posts: 567
From: Northern Jersey
Originally Posted by emdot
^^ think you just found your set lol.

I had some on my 4th gen with radials on them. i needed a 5mm spacer in the front to clear the coils with the stock FD tire size. just a heads up, you might run into that problem.

2007ish
Thank you for the heads up, might look nice with some hellaflush action.
Old Jan 11, 2012 | 06:31 PM
  #8  
schmellyfart's Avatar
Senior Member
iTrader: (46)
 
Joined: Jan 2009
Posts: 3,816
From: AZ
With the rear suspension uncompressed, the stock FD size tires (225/50/16) would rub on the lowering springs I had at the time. However, this was not an issue once the car was back on the ground. With coilovers, the rears don't rub at all on or off the ground.
Name:  3DLDS.png
Views: 11
Size:  338.8 KB

Last edited by schmellyfart; Jan 11, 2012 at 06:36 PM.
Old Jan 14, 2012 | 08:41 AM
  #9  
jbrooks870's Avatar
Thread Starter
Senior Member
iTrader: (4)
 
Joined: Aug 2007
Posts: 567
From: Northern Jersey
Originally Posted by schmellyfart
With the rear suspension uncompressed, the stock FD size tires (225/50/16) would rub on the lowering springs I had at the time. However, this was not an issue once the car was back on the ground. With coilovers, the rears don't rub at all on or off the ground.

Rubbing shouldnt be a problem, but I need a set of wider wheels.
Old Jan 26, 2012 | 05:16 PM
  #10  
jbrooks870's Avatar
Thread Starter
Senior Member
iTrader: (4)
 
Joined: Aug 2007
Posts: 567
From: Northern Jersey
Still looking...........................
Old Jan 28, 2012 | 02:56 AM
  #11  
RowlTyde205's Avatar
Junior Member
 
Joined: Nov 2011
Posts: 34
From: Tuscaloosa, AL
Would you consider selling you OEM wheels?
Old Jan 28, 2012 | 07:13 AM
  #12  
jbrooks870's Avatar
Thread Starter
Senior Member
iTrader: (4)
 
Joined: Aug 2007
Posts: 567
From: Northern Jersey
Originally Posted by RowlTyde205
Would you consider selling you OEM wheels?
If I can find a set then yes, but it may take awhile. My buddy is selling his 02-03 GLE wheels if you need a set sooner than later. Maxin03 is his username.

.......your welcome Mel lol
Old Jan 28, 2012 | 07:41 PM
  #13  
Maxin03's Avatar
Senior Member
iTrader: (9)
 
Joined: May 2009
Posts: 684
From: Bergen Co. NJ
Originally Posted by jbrooks870
If I can find a set then yes, but it may take awhile. My buddy is selling his 02-03 GLE wheels if you need a set sooner than later. Maxin03 is his username.

.......your welcome Mel lol
that correct i have 03 gle with new tires & i might sell my 03 se if the price is right..
Old Jan 31, 2012 | 11:11 PM
  #14  
RowlTyde205's Avatar
Junior Member
 
Joined: Nov 2011
Posts: 34
From: Tuscaloosa, AL
Originally Posted by Maxin03
that correct i have 03 gle with new tires & i might sell my 03 se if the price is right..
Not really a fan of the GLE's...
Old Feb 1, 2012 | 08:17 PM
  #15  
Quickywd01's Avatar
Senior Member
iTrader: (16)
 
Joined: May 2007
Posts: 3,078
From: NorthernNJ
I am ready to sell them whenever you feel like buying them. Let me know.
Old Feb 5, 2012 | 07:32 PM
  #16  
jbrooks870's Avatar
Thread Starter
Senior Member
iTrader: (4)
 
Joined: Aug 2007
Posts: 567
From: Northern Jersey
To the top, still looking.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
-ReLLiK-
5th Generation Classifieds (2000-2003)
4
Apr 29, 2016 06:25 PM
aminus21
4th Generation Classifieds (1995-1999)
6
Sep 12, 2015 04:53 PM
Violator
4th Generation Classifieds (1995-1999)
1
Sep 9, 2015 10:14 AM
dcam0326
General Maxima Discussion
4
Sep 8, 2015 11:02 PM
DrVee
8th Generation Maxima (2016-)
7
Sep 4, 2015 12:18 PM




All times are GMT -7. The time now is 05:52 PM.