Maxima Forums
see - they're magnets, they stick together
see - they're magnets, they stick together
0 2019/11/27 19:15:39
inner tie rod end ready for crimping
inner tie rod end ready for crimping
0 2019/11/27 19:15:41
magnets installed on flats and over locking ring rim
magnets installed on flats and over locking ring rim
0 2019/11/27 19:15:44
16" pliers crimping the magnets on the flats
16" pliers crimping the magnets on the flats
0 2019/11/27 19:15:47
another view of 16" pliers crimping onto magnets on the flats
another view of 16" pliers crimping onto magnets on the flats
0 2019/11/27 19:15:50
box of magnets
box of magnets
0 2019/11/27 19:15:53
details of magnet packaging
details of magnet packaging
0 2019/11/27 19:15:55
Stainless zip ties
Stainless zip ties
0 2019/11/29 10:42:58
Stainless zip ties
Stainless zip ties
0 2019/11/29 10:47:39
Stainless zip ties
Stainless zip ties
0 2019/11/29 10:49:37
Gearwrench tool to install the "other style"
Gearwrench tool to install the "other style"
0 2019/11/30 11:41:14
closeup of the "other" tool
closeup of the "other" tool
0 2019/11/30 11:41:17
the wrench necessary to install the cv-boot style clamps
the wrench necessary to install the cv-boot style clamps
0 2019/11/30 11:41:21
OEM wire, with outside clamp I am unable to install this as-designed - I can't keep it on the rack rim and twist it at the same time.
OEM wire, with outside clamp I am unable to install this as-designed - I can't keep it on the rack rim and twist it at the same time.
0 2019/11/30 11:41:24
the "other" style of cv boot clamp
the "other" style of cv boot clamp
0 2019/11/30 11:41:27
this is the cv-boot style clamp that was removed from the aftermarket rack itre
this is the cv-boot style clamp that was removed from the aftermarket rack itre
0 2019/11/30 11:41:29
another pic of the cv-boot style clamp
another pic of the cv-boot style clamp
0 2019/11/30 11:41:32
the clamp is 10" long
the clamp is 10" long
0 2019/11/30 11:41:35
this is how the springs are supposed to ride - INSIDE the caliper of course
this is how the springs are supposed to ride - INSIDE the caliper of course
0 2019/12/19 14:18:31
these are the springs installed on the pads
these are the springs installed on the pads
0 2019/12/19 14:18:34
this is a half-ass attempt to install both pads with springs into the assembled caliper. the springs fall out of the pad holes (because it's upside down, right)
this is a half-ass attempt to install both pads with springs into the assembled caliper. the springs fall out of the pad holes (because it's upside down, right)
0 2019/12/19 14:18:38
0 2020/03/06 18:45:59
0 2020/03/19 19:16:12
0 2020/04/12 17:02:05
0 2020/04/12 17:02:32
0 2020/04/12 17:03:20
0 2020/04/12 17:04:23
0 2020/04/12 17:04:35
0 2020/04/12 17:04:56
0 2020/04/12 17:05:13
0 2020/04/29 13:33:04
0 2022/01/19 16:08:56
0 2022/04/24 15:03:14
Fob1
Fob1
0 2022/12/17 11:42:20
Fob2
Fob2
0 2022/12/17 11:42:24
0 2024/11/01 21:04:15
0 2024/11/01 21:04:17
Driver's side still assembled
Driver's side still assembled
0 2025/09/18 11:57:12
Passenger side, unhooked from caliper lever, with collapsed boot
Passenger side, unhooked from caliper lever, with collapsed boot
0 2025/09/18 11:57:15
Passenger side, note lack of length compared with photos of driver's side
Passenger side, note lack of length compared with photos of driver's side
0 2025/09/18 11:57:19