Maxima Forums
0 2025/02/20 10:15:57
Pic: Universal car cupholders/dvd holder/change holder
Pic: Universal car cupholders/dvd holder/change holder
0 2025/02/20 10:15:36
Could this cracked hose cause high idle and vacuum leak?
Could this cracked hose cause high idle and vacuum leak?
0 2025/02/10 13:26:43
All of the hoses on this car are original with 121k miles and need to be replaced. Been trying to troubleshoot this high idle issue with P0507 code and need help diagnosing and fixing this problem desperately. I've purchased alot of parts for this car and it's bugging the heck out of me what could be causing this P0507 code. Any ideas of where I can purchase this hose and what that cylindrical looking part is called right next to the plate on the uim plenum where this hose is cracked at?
All of the hoses on this car are original with 121k miles and need to be replaced. Been trying to troubleshoot this high idle issue with P0507 code and need help diagnosing and fixing this problem desperately. I've purchased alot of parts for this car and it's bugging the heck out of me what could be causing this P0507 code. Any ideas of where I can purchase this hose and what that cylindrical looking part is called right next to the plate on the uim plenum where this hose is cracked at?
0 2025/02/10 12:44:09
0 2025/02/10 12:38:49
Can this be the Iac valve with the blue connector on it with the 2 hoses? It doesn't look like an Iac valve whatsoever. If the 2003 Maxima even has an IACV where would it be located? I know they can get clogged up and/or need to be replaced and these years do not have drive by wire TB. So, what am I missing here?
Can this be the Iac valve with the blue connector on it with the 2 hoses? It doesn't look like an Iac valve whatsoever. If the 2003 Maxima even has an IACV where would it be located? I know they can get clogged up and/or need to be replaced and these years do not have drive by wire TB. So, what am I missing here?
0 2025/02/10 12:13:17
After performing the necessary, correct idle-air relearn procedure I turned on the vehicle as soon as the CEL stopped blinking and it only drops to 850 idle rpm. Can putting a cold air intake in hooked up to the new TB cause the ecu to become lazy? Or maybe there may be a vacuum leak? Just last week I unplugged the wire clip to the front-lower oem motor mount and am hoping I didn't do damage to the ecu/pcm.
After performing the necessary, correct idle-air relearn procedure I turned on the vehicle as soon as the CEL stopped blinking and it only drops to 850 idle rpm. Can putting a cold air intake in hooked up to the new TB cause the ecu to become lazy? Or maybe there may be a vacuum leak? Just last week I unplugged the wire clip to the front-lower oem motor mount and am hoping I didn't do damage to the ecu/pcm.
0 2025/02/10 11:52:51
0 2025/02/10 11:42:17
0 2025/02/09 14:28:57
I won't really know until I change the struts/shocks. I'd really like to get Moog springs if I knew the part #'s.
I won't really know until I change the struts/shocks. I'd really like to get Moog springs if I knew the part #'s.
0 2025/02/09 14:19:11
When testing the suspension by pushing down on the car, there's no bounce, so the factory SE springs both front/rear they seem to be strong still... but don't know how much longer til they start showing fatigue
When testing the suspension by pushing down on the car, there's no bounce, so the factory SE springs both front/rear they seem to be strong still... but don't know how much longer til they start showing fatigue
0 2025/02/09 14:18:55
0 2025/02/09 14:15:41
Pic: Any idea what this bar is called that attaches to the rear sway bar end links for a 2003 Max SE 3.5L? I just can't seem to find them anywhere and don't know exactly what they do. Any help would be greatly appreciated!
Pic: Any idea what this bar is called that attaches to the rear sway bar end links for a 2003 Max SE 3.5L? I just can't seem to find them anywhere and don't know exactly what they do. Any help would be greatly appreciated!
0 2025/02/09 12:48:35
0 2025/01/27 15:02:43
0 2025/01/27 14:58:19
There's a bunch of them for the return hose. I don't remember which org. member put one in, but IIRC, they used a 'Magnefine' 3/8 filter for the hose I'm referring to that's leaking on my max. Anyone try this with their return hose?
There's a bunch of them for the return hose. I don't remember which org. member put one in, but IIRC, they used a 'Magnefine' 3/8 filter for the hose I'm referring to that's leaking on my max. Anyone try this with their return hose?
0 2025/01/27 14:50:52
This hose. It's 7.125 inches and edelmann is a good aftermarket brand. And just put a 3/8 inch clamp on it? Would installing a good power-steering hose 'filter' be a good idea to keep the fluid nice and clean to have good fluid filtration from any particles going through the power-steering fluid system? Such as maybe a 'Magnefine' or 'Cardone' 3/8 I.D. filter for this hose?
This hose. It's 7.125 inches and edelmann is a good aftermarket brand. And just put a 3/8 inch clamp on it? Would installing a good power-steering hose 'filter' be a good idea to keep the fluid nice and clean to have good fluid filtration from any particles going through the power-steering fluid system? Such as maybe a 'Magnefine' or 'Cardone' 3/8 I.D. filter for this hose?
0 2025/01/27 14:39:00
0 2025/01/27 14:29:29
Sunsong makes good hoses for these cars.
Sunsong makes good hoses for these cars.
0 2025/01/27 14:24:58
0 2025/01/20 15:19:44
0 2025/01/20 14:24:23
Sorry about the bad pics.
Sorry about the bad pics.
0 2025/01/20 14:14:16
0 2025/01/20 14:13:47
0 2025/01/20 14:08:23
Main rear cat is 'exhausted'... no pun intended. Measurement of rear cat is 13 inches incl flanges. Severe rotten egg smell, but no codes. The fuel gauge sending unit is sticking so it's all over the place. It goes to 3/4 tank full, then 1/3 full, so I never know how much fuel is in her.
Main rear cat is 'exhausted'... no pun intended. Measurement of rear cat is 13 inches incl flanges. Severe rotten egg smell, but no codes. The fuel gauge sending unit is sticking so it's all over the place. It goes to 3/4 tank full, then 1/3 full, so I never know how much fuel is in her.
0 2025/01/20 13:56:00
I am in need of a new flex-pipe and (3) new cats plus all 02 sensors. Can someone explain to me exactly what the above picture means? I'm struggling to search for an oe-replacement flex-pipe and the right pre-cats/rear main cat that will give me the same performance,(if not better) for my 2003 Maxima SE 3.5L w/o gutting the cats. I live in Connecticut where emissions are very strict. The stock pipe is completely shot as well as all 3 cats.
I am in need of a new flex-pipe and (3) new cats plus all 02 sensors. Can someone explain to me exactly what the above picture means? I'm struggling to search for an oe-replacement flex-pipe and the right pre-cats/rear main cat that will give me the same performance,(if not better) for my 2003 Maxima SE 3.5L w/o gutting the cats. I live in Connecticut where emissions are very strict. The stock pipe is completely shot as well as all 3 cats.
0 2025/01/20 13:40:44
0 2025/01/15 05:57:07
0 2025/01/15 05:56:40
0 2025/01/15 05:28:20
I bought the Dorman steering shaft from PartsGeek. It's made in China but seems very well-constructed and solid! I believe it came from the 'A' or 'B' catalog. And it was the more expensive 'Dorman' steering shaft. It cost $111 w/o shipping/tax.
I bought the Dorman steering shaft from PartsGeek. It's made in China but seems very well-constructed and solid! I believe it came from the 'A' or 'B' catalog. And it was the more expensive 'Dorman' steering shaft. It cost $111 w/o shipping/tax.
0 2025/01/15 05:27:55
0 2025/01/14 06:18:12
0 2025/01/13 04:14:49
Well, the mounting area for spacer kits is a direct-fit no matter whether it's a 70mm or 75mm TB. The plastic TB mounts are the same. The bolts and gaskets for 70mm/75mm are the same size since both TB are the same size. So they'll mount correctly from the TB to uim plenum elbow perfectly. The plastic gasket that came with this TB is roughly 3-1/2 inches length/height for either mm TB.
Well, the mounting area for spacer kits is a direct-fit no matter whether it's a 70mm or 75mm TB. The plastic TB mounts are the same. The bolts and gaskets for 70mm/75mm are the same size since both TB are the same size. So they'll mount correctly from the TB to uim plenum elbow perfectly. The plastic gasket that came with this TB is roughly 3-1/2 inches length/height for either mm TB.
0 2025/01/13 04:14:21
0 2025/01/13 04:09:49
The driver's side upper pan gasket for the '03 is only off not by much in dimensions compared to the '04
The driver's side upper pan gasket for the '03 is only off not by much in dimensions compared to the '04
0 2025/01/09 15:18:13
0 2025/01/09 13:52:59
0 2025/01/09 13:47:27
0 2025/01/09 13:35:28
0 2025/01/09 13:28:21
0 2025/01/09 11:44:21