Maxima Forums

1/4 and 1/8 Mile Racing Talk about track times, launch techniques, strategies, etc. Check out the "Timeslips" subforum for posted times.No discussion of street racing will be tolerated.

first time on drag radials and 11 psi

Thread Tools
 
Search this Thread
 
Old 12-13-2012, 02:11 PM
  #1  
Junior Member
Thread Starter
 
chavez se's Avatar
 
Join Date: Mar 2011
Posts: 38
first time on drag radials and 11 psi
Very happy with my max! 2011 shelby with mods (12 psi pulley) i did 12.90 et at 1500 mts above sea level with 11 psi
Last edited by chavez se; 12-13-2012 at 02:13 PM.
chavez se is offline  
Reply
Old 12-13-2012, 02:30 PM
  #2  
SLOW
iTrader: (23)
 
Nealoc187's Avatar
 
Join Date: Mar 2001
Location: West burbs, Chicago
Posts: 14,631
very cool video but what about the timeslip?
Nealoc187 is offline  
Reply
Old 12-13-2012, 04:42 PM
  #3  
Junior Member
Thread Starter
 
chavez se's Avatar
 
Join Date: Mar 2011
Posts: 38
I donīt have the ticket, the printer wasnīt working.
chavez se is offline  
Reply
Old 12-14-2012, 01:05 PM
  #4  
Senior Member
iTrader: (17)
 
datdude20's Avatar
 
Join Date: Jan 2007
Location: zimbabwe
Posts: 2,027
What kind of mph?
datdude20 is offline  
Reply
Old 12-14-2012, 04:54 PM
  #5  
Senior Member
iTrader: (2)
 
ranmas2004's Avatar
 
Join Date: Mar 2011
Location: Lehigh Valley, PA
Posts: 1,626
what kind of drag radials? What did you dyno at and what psi? What are you using for engine management? UTEC? HALTECH? what kind of turbo? more stats man....
ranmas2004 is offline  
Reply
Old 12-14-2012, 06:51 PM
  #6  
Senior Member
iTrader: (7)
 
kidgrave's Avatar
 
Join Date: Nov 2009
Location: Los Angeles
Posts: 4,732
In for more info on the car.
kidgrave is offline  
Reply
Old 12-14-2012, 07:28 PM
  #7  
Junior Member
Thread Starter
 
chavez se's Avatar
 
Join Date: Mar 2011
Posts: 38
I have a holset hx35/40 turbo at 11 psi, engine management is a afc neo and my drags are mickey thompson.
The mustang is a 2011 shelby 550 hp with 12 psi pulley.
chavez se is offline  
Reply
Old 12-14-2012, 08:51 PM
  #8  
Senior Member
iTrader: (8)
 
streetzlegend's Avatar
 
Join Date: Dec 2003
Posts: 4,097
Impressive.
11psi from the hx40 on stock compression, you should be near the 500hp mark, pretty bad ***.
Brave too if your on a stock motor.
Last edited by streetzlegend; 12-14-2012 at 08:55 PM.
streetzlegend is offline  
Reply
Old 12-15-2012, 02:59 PM
  #9  
Junior Member
Thread Starter
 
chavez se's Avatar
 
Join Date: Mar 2011
Posts: 38
Yes, i am very happy with my set up !
chavez se is offline  
Reply
Old 12-16-2012, 08:12 AM
  #10  
Senior Member
iTrader: (5)
 
krazy6's Avatar
 
Join Date: May 2005
Location: Yorba Linda, CA
Posts: 1,565
Nice car and setup! Runs good!
krazy6 is offline  
Reply
Old 12-16-2012, 12:25 PM
  #11  
Senior Member
iTrader: (2)
 
ranmas2004's Avatar
 
Join Date: Mar 2011
Location: Lehigh Valley, PA
Posts: 1,626
did you ever dyno the car?? Im interested in seeing the curve.
ranmas2004 is offline  
Reply
Old 12-16-2012, 12:53 PM
  #12  
Junior Member
Thread Starter
 
chavez se's Avatar
 
Join Date: Mar 2011
Posts: 38
Thereīs no dynos here in chihuahua, mex.
chavez se is offline  
Reply
Old 12-17-2012, 02:22 PM
  #13  
Senior Member
iTrader: (2)
 
ranmas2004's Avatar
 
Join Date: Mar 2011
Location: Lehigh Valley, PA
Posts: 1,626
Originally Posted by chavez se
Thereīs no dynos here in chihuahua, mex.
OH...thought you were in California or something.
ranmas2004 is offline  
Reply
Old 12-18-2012, 04:52 AM
  #14  
Senior Member
iTrader: (8)
 
streetzlegend's Avatar
 
Join Date: Dec 2003
Posts: 4,097
Chavez. What cams do you have?
streetzlegend is offline  
Reply
Old 12-18-2012, 09:47 AM
  #15  
Turbo 3.5
iTrader: (69)
 
t6378tp's Avatar
 
Join Date: Dec 2005
Location: Philly
Posts: 7,796
Trap speed please
t6378tp is offline  
Reply
Old 12-18-2012, 09:58 AM
  #16  
Junior Member
Thread Starter
 
chavez se's Avatar
 
Join Date: Mar 2011
Posts: 38
i donīt have performance cams, the engine is completely stock, and my trap speed is 112-115 mph
the track is at 5000 ft elevation
chavez se is offline  
Reply
Old 12-18-2012, 12:27 PM
  #17  
Senior Member
iTrader: (2)
 
ranmas2004's Avatar
 
Join Date: Mar 2011
Location: Lehigh Valley, PA
Posts: 1,626
So is 5000 ft above sea level high enough to affect performance?
ranmas2004 is offline  
Reply
Old 12-18-2012, 02:01 PM
  #18  
Senior Member
iTrader: (5)
 
Rods03Max619's Avatar
 
Join Date: Oct 2009
Location: Diego,California
Posts: 8,949
Nice vid man.....
Rods03Max619 is offline  
Reply
Old 12-18-2012, 02:06 PM
  #19  
Junior Member
Thread Starter
 
chavez se's Avatar
 
Join Date: Mar 2011
Posts: 38
yes, at sea level is much more oxigen at the air.
chavez se is offline  
Reply
Old 12-18-2012, 04:43 PM
  #20  
Turbo 3.5
iTrader: (69)
 
t6378tp's Avatar
 
Join Date: Dec 2005
Location: Philly
Posts: 7,796
Originally Posted by ranmas2004
So is 5000 ft above sea level high enough to affect performance?
hellz yeah
t6378tp is offline  
Reply
Old 12-18-2012, 05:47 PM
  #21  
Senior Member
iTrader: (8)
 
streetzlegend's Avatar
 
Join Date: Dec 2003
Posts: 4,097
At sealevel that thing should be trapping 120's so thats pretty fast at that elevation
streetzlegend is offline  
Reply
Old 12-18-2012, 07:03 PM
  #22  
Junior Member
Thread Starter
 
chavez se's Avatar
 
Join Date: Mar 2011
Posts: 38
i need to check the wastegate valve because i put the boostcontroller at maximum and only get 11 psi, i need 14 psi this is the firt time that i run my maxima turbo in a race track and i need to know how fast is at 14 psi.
chavez se is offline  
Reply
Old 12-18-2012, 08:34 PM
  #23  
Turbo 3.5
iTrader: (69)
 
t6378tp's Avatar
 
Join Date: Dec 2005
Location: Philly
Posts: 7,796
Originally Posted by chavez se
i need to check the wastegate valve because i put the boostcontroller at maximum and only get 11 psi, i need 14 psi this is the firt time that i run my maxima turbo in a race track and i need to know how fast is at 14 psi.
please do me a favor and either use race fuel or meth if your going to run 14psi on stock timing
t6378tp is offline  
Reply
Old 12-18-2012, 09:14 PM
  #24  
Senior Member
iTrader: (1)
 
ABIGBRAIN's Avatar
 
Join Date: Nov 2011
Location: Tampa, Fl
Posts: 477
Must have been really hard on the brakes after you crossed the finish line because your speedometer shows 75 mph just about 2 seconds later.

What's the name of the track?

Gonna need to see a slip next time....
ABIGBRAIN is offline  
Reply
Old 12-19-2012, 04:28 AM
  #25  
Senior Member
iTrader: (2)
 
ranmas2004's Avatar
 
Join Date: Mar 2011
Location: Lehigh Valley, PA
Posts: 1,626
Originally Posted by t6378tp
please do me a favor and either use race fuel or meth if your going to run 14psi on stock timing
yeah man dont push it on stock block with stock timing going to be a short lived boosted Maxima.
ranmas2004 is offline  
Reply
Old 12-20-2012, 11:31 AM
  #26  
Junior Member
Thread Starter
 
chavez se's Avatar
 
Join Date: Mar 2011
Posts: 38
when i put more than 6 psi always put xylene on the gas to get 98 octane, no problem!
chavez se is offline  
Reply
Old 12-20-2012, 11:35 AM
  #27  
Junior Member
Thread Starter
 
chavez se's Avatar
 
Join Date: Mar 2011
Posts: 38
Originally Posted by ABIGBRAIN
Must have been really hard on the brakes after you crossed the finish line because your speedometer shows 75 mph just about 2 seconds later.

What's the name of the track?

Gonna need to see a slip next time....
when i cross the finish line i have to brake hard to get a left turn and donīt go to other way that is longer.
chavez se is offline  
Reply
Old 12-20-2012, 12:02 PM
  #28  
Senior Member
iTrader: (1)
 
ABIGBRAIN's Avatar
 
Join Date: Nov 2011
Location: Tampa, Fl
Posts: 477
OK.... post up a timeslip the next time you run. What was the name of the track?

Andy
ABIGBRAIN is offline  
Reply
Old 12-20-2012, 05:01 PM
  #29  
Junior Member
Thread Starter
 
chavez se's Avatar
 
Join Date: Mar 2011
Posts: 38
autodromo iternacional francisco villa
http://www.mapasmexico.net/googlemap...sco-villa.html
chavez se is offline  
Reply
Old 02-06-2013, 07:32 PM
  #30  
Junior Member
iTrader: (1)
 
Azmax61's Avatar
 
Join Date: Dec 2012
Posts: 24
So sick.
Azmax61 is offline  
Reply
Old 03-21-2013, 12:00 PM
  #31  
Senior Member
iTrader: (10)
 
clintb3astwood's Avatar
 
Join Date: Jul 2011
Location: Queens New york
Posts: 1,371
Did you have a video of you racing and beating a Porsche cuz if so, I saw it today and holy shiitt! LOL
clintb3astwood is offline  
Reply
Old 03-22-2013, 03:49 PM
  #32  
Supporting Maxima.org Member
iTrader: (3)
 
deezo's Avatar
 
Join Date: Apr 2001
Location: FV, NC
Posts: 14,287
GT500 needs a driver mod. Not saying your Max isn't impressive but GT500 should have put up a way better fight than that. His 60' probably sucked as well.
deezo is offline  
Reply
Old 03-22-2013, 10:02 PM
  #33  
Senior Member
iTrader: (1)
 
ABIGBRAIN's Avatar
 
Join Date: Nov 2011
Location: Tampa, Fl
Posts: 477
It was 15 second pass,... not 12 second one. No timeslip and using YouTube time. Nothing special here.... Not even turbo whine...

Andy
ABIGBRAIN is offline  
Reply
Old 03-22-2013, 10:05 PM
  #34  
Senior Member
iTrader: (1)
 
ABIGBRAIN's Avatar
 
Join Date: Nov 2011
Location: Tampa, Fl
Posts: 477
Yup... Triple checked... Nothing special here.
ABIGBRAIN is offline  
Reply
Old 03-22-2013, 10:41 PM
  #35  
Senior Member
iTrader: (2)
 
ranmas2004's Avatar
 
Join Date: Mar 2011
Location: Lehigh Valley, PA
Posts: 1,626
Originally Posted by ABIGBRAIN
Yup... Triple checked... Nothing special here.
It looks special to me....keep using that youtube time.
ranmas2004 is offline  
Reply
Old 03-23-2013, 10:49 AM
  #36  
Senior Member
iTrader: (1)
 
ABIGBRAIN's Avatar
 
Join Date: Nov 2011
Location: Tampa, Fl
Posts: 477
Originally Posted by ranmas2004
It looks special to me....keep using that youtube time.
Stopwatch shows the same thing... without a timeslip this thread is just a nice beatup vid on a crappy Mustang.

BTW I respect your hard work on the 2009VQ, but this video proves nothing.

Andy
ABIGBRAIN is offline  
Reply
Old 03-23-2013, 03:55 PM
  #37  
Member
 
01bluemax's Avatar
 
Join Date: Jun 2008
Location: florence, al
Posts: 177
Originally Posted by ABIGBRAIN
It was 15 second pass,... not 12 second one. No timeslip and using YouTube time. Nothing special here.... Not even turbo whine...

Andy
the cars start moving @ 0:03 sec and he lifts at 0:16 sec. that's about 13 sec. from what I can tell.
01bluemax is offline  
Reply
Old 03-23-2013, 05:06 PM
  #38  
Senior Member
iTrader: (3)
 
aackshun's Avatar
 
Join Date: Aug 2007
Location: Houston, TX
Posts: 5,404
Originally Posted by ABIGBRAIN
Stopwatch shows the same thing... without a timeslip this thread is just a nice beatup vid on a crappy Mustang.

BTW I respect your hard work on the 2009VQ, but this video proves nothing.

Andy
A. You've obviously never driven a GT500 - Driver mod or not, that car should've freight trained him if it's as slow as you think. No mustang of that body style is anywear near the 15s, even if they were it's a v6 w/ a st00pid high trap @ 14.8, fck even the auto v6's are trapping upper 90s
B. You're YT timing skills are to be desired.
C. Shouldn't you be driving to atlanta

Originally Posted by 01bluemax
the cars start moving @ 0:03 sec and he lifts at 0:16 sec. that's about 13 sec. from what I can tell.
^ This.

Don't even really care how you cut it, a 02-03 6mt trapping that well into 4th gear is a fast car. Good job Chavez_SE
Last edited by aackshun; 03-23-2013 at 05:11 PM.
aackshun is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MN FS: Cattman Y-pipe, Magnaflow Hi Flow Cat, Catback
Maxima_Joe
4th Generation Classifieds (1995-1999)
16
11-25-2015 08:19 AM
Reprogramming keyless remote
intimidator
4th Generation Maxima (1995-1999)
14
09-05-2015 07:23 PM
MN FS:KYB AGX Shocks/Struts W/Progress Springs
Maxima_Joe
4th Generation Classifieds (1995-1999)
0
08-27-2015 12:01 AM
best/lightest wheels for 5.5gen
Xi MaX SC
1/4 and 1/8 Mile Racing
2
08-07-2015 08:47 AM
Back to Subforum
1/4 and 1/8 Mile Racing
View Next Unread
Top 1/4 Mile Time for Turbocharger, Supercharger, Nitrous, All Motor Bolt-ons, Stock)




Advanced Search
Quick Reply: first time on drag radials and 11 psi


Reply Closed Thread Share

All times are GMT -7. The time now is 04:30 AM.