ATTN: motor mount
#1
ATTN: motor mount
i have a slight emergency, if any one has access to a motor mount and they wanna sell it please let me kno...i need one fast, oh its the rear motor mount..thanx alot in advance i apprecaite any help
~mike
~mike
#2
Re: ATTN: motor mount
Originally posted by spacey64
i have a slight emergency, if any one has access to a motor mount and they wanna sell it please let me kno...i need one fast, oh its the rear motor mount..thanx alot in advance i apprecaite any help
~mike
i have a slight emergency, if any one has access to a motor mount and they wanna sell it please let me kno...i need one fast, oh its the rear motor mount..thanx alot in advance i apprecaite any help
~mike
S
#3
Re: Re: ATTN: motor mount
sounds good thanx sarin, i get paid friday email me at spacey64@yahoo.com and we'll exchange info iight
thanx again
~mike
thanx again
~mike
#4
Re: ATTN: motor mount
Originally posted by spacey64
i have a slight emergency, if any one has access to a motor mount and they wanna sell it please let me kno...i need one fast, oh its the rear motor mount..thanx alot in advance i apprecaite any help
~mike
i have a slight emergency, if any one has access to a motor mount and they wanna sell it please let me kno...i need one fast, oh its the rear motor mount..thanx alot in advance i apprecaite any help
~mike
#5
Re: Re: ATTN: motor mount
Originally posted by dr.disc
I need one too. I think both of mine are busted.
I need one too. I think both of mine are busted.
S
#6
Re: Re: Re: ATTN: motor mount
Originally posted by maximase86
Sorry, only have one mount. What you can do is test to see which ones are bad. You need 2 people. Basically, you have someone get into the car, start it up. Leave the parking brake in. Put it into gear, and slowly give the car power. Watch for engine movement, if normally it should only move an inch or so, if it moves more...well you got a bad mount. After replacing my rear motor mount, I now have to replace the front mount. I was able to get the motor to rise a good 4 inches doing that technique. Though your engine is in no risk of dropping, its the bouncing around that will do damage to it.
S
Sorry, only have one mount. What you can do is test to see which ones are bad. You need 2 people. Basically, you have someone get into the car, start it up. Leave the parking brake in. Put it into gear, and slowly give the car power. Watch for engine movement, if normally it should only move an inch or so, if it moves more...well you got a bad mount. After replacing my rear motor mount, I now have to replace the front mount. I was able to get the motor to rise a good 4 inches doing that technique. Though your engine is in no risk of dropping, its the bouncing around that will do damage to it.
S
~mike
#7
Re: Re: Re: Re: ATTN: motor mount
Originally posted by spacey64
LOL, yea tell me about it, when i put car into reverse it barely moves an inch or 2 but when i put into drive holy **** it almost looks as if it will hit the hood and under hard acceratio the shift between first and second literally rocks the whole car..bad
~mike
LOL, yea tell me about it, when i put car into reverse it barely moves an inch or 2 but when i put into drive holy **** it almost looks as if it will hit the hood and under hard acceratio the shift between first and second literally rocks the whole car..bad
~mike
S
#8
Re: Re: Re: Re: Re: ATTN: motor mount
Originally posted by maximase86
With mine, you can see the shifter move because of the front mount.
S
With mine, you can see the shifter move because of the front mount.
S
A 300ZX motor mount will work for the front one, or one from a 200SX SE V6. They are not identical, but they fit.
#9
Re: Re: Re: Re: Re: Re: ATTN: motor mount
Originally posted by dr.disc
You can just look and see if it is broken. If it is, the bolt through the middle will not be in the middle. It will be at the bottom of the metal circle.
A 300ZX motor mount will work for the front one, or one from a 200SX SE V6. They are not identical, but they fit.
You can just look and see if it is broken. If it is, the bolt through the middle will not be in the middle. It will be at the bottom of the metal circle.
A 300ZX motor mount will work for the front one, or one from a 200SX SE V6. They are not identical, but they fit.
S
Thread
Thread Starter
Forum
Replies
Last Post
AaronL
5th Generation Maxima (2000-2003)
15
08-08-2020 10:31 AM
Unclejunebug
5th Generation Maxima (2000-2003)
10
04-02-2016 05:42 AM
CAN-Toronto FS: Basement cleaning
knight_yyz
5th Generation Classifieds (2000-2003)
12
11-01-2015 01:34 PM