Zparts wants 185 shipped for a 88 N/A Auto , MAF / ECU , Is that a good price?

 

\

i could prolly save you 85 bucks............

 

http://www.club-s12.org/board/showthread.php?t=12269

I saw this the other day. You would need to check to see if it would fit your car, but just thought I would throw it out there, since I am guessing many of you do not go to the S12 site.

 

Thanks , Car but i thought you had to have the same year , For the maf / ecu ? Because dident they do a few upgrades since 1986? And do you know if the ecu , Can run for both auto and Man?

 

you will need to ask someone that knows, because I do not

 

There are some ecu's and maf's here: http://z31.com/4sale/?partsell
The MAF I know is the same for all years on the 300zx, it's the ECU that may need to match the year of your car. I know that with the Z's, you have to match the ECU to the year, but I don't know if that carries over to the Maximas.

 

Would you happen to know if the ecu supports both a/t and m/t because i found a 88 n/a ecu?

 

Yes they are compatible. The cars have a seperate control box for the auto trans. If you want proof, here is a link to the rom table for an 88 300zx n/a ecu. As you can see there are no parameters for transmission controls.http://www.redz31.com/pages/fuel/hex.html

 

Thats exactly what i was thinking , Thanks bro!

 

One thing to note, 84-86 and 87-88 ECU's don't play well with each other. So be sure you stick the the ECU around your year or you will have problems.

S

 

yeah im just going to try and get a 88 ecu , Just to play it safe , If i might go with Nitro , Or A engine swap.

 

thinking of doing an ecu and MAF swap from an 86 z31 soon(trying to get that 8hp difference back)

 

Nah, you need the ECU from the 88/89 Z31. It is 16-bit Vs. the 8-bit of the earlier ECU. You get higher res. maps.

 

I/ve got an ecu and maf pulled from my '87 automatic if you are interested.

 

how much you want?

 

check your email.

 

nitrous?

this car isnt going to last long i take it.

 

I also have a 1987 NA Z31 parts car.... Seattle area.
Email me or PM. I don't check this forum as much anymore.

 

There are tons of people that have there 95-05 maximas with n2o And have near 200k miles , Mine has only 146k , And I have seend people just using the Stock maf, for a cold air intake , I thought the wholerason of using the 300zx maf , was because the stock on , Our cars isent possible to make a cold air intake with?

 

Aye, nitrous isn't bad....it's stupidity with nitrous that's bad.

S

 

And what would you call stupidity? Using a blow torch to heat up your n2o bottle ? haha i just watched a video of some one doing that.. wow

 

i got an 85 na 300zx automatic ecu for sale its modded with a clear top if ne one is interested lemme kno..

 

well is the 300zx maf bigger then the stock maxima's ? I think im just going to take the maf off the airbox , get a pipe , And an adapter and make a Short air intake.

 

The 300ZX MAF is the same as the 2nd Gen Maxima as far as I understand. I have an '88 300ZX Non Turbo Automatic ECU I'm looking to sell. It reads "A18-A03 M87" on the label... see here for reference:


http://z31.com/oboard/archives/view.pl?53

I'm looking for $100 + shipping for it. I also have an '84 Non Turbo unit somewhere, and an '86 Turbo unit I'll be looking to get rid of when I sell my 1st Gen Maxima Z31 conversion wiring harness.

If you're interested, please let me know. Otherwise, it will probably end up on ebay in a couple months (at a higher price).

Thanks - Chris

 

I have 1987 300ZX parts. ECU and MAF are still available. Its an early '87 BTW, not 16-bit. Its an old 8-bit like the Nintendo.